2008 MITSUBISHI SHOGUN ECO mode

For pleasant driving
5-61
5
To listen to a CD
E00709601075
The CD can be loaded or ejected
by pressing the LOAD button
(15) or the eject button (7) even
if the audio system power is
off. 1. Press the PWR button (2) to turn the audio system on and
off. The system turns on in the last mode used.
2. Press the CD button (4) to enter CD mode. The auto-
changer will start playback if
the CD is already in the
autochanger.
3. To stop the CD, turn off the power by pressing the PWR
button (2) or change over to radio mode by pressing theAM/FM button (1), or eject th
e disc by pressing the eject
button (7).
NOTE●
To adjust the volume and tone, refer to “To adjust the vol- ume” on page 5-44 and “To adjust the tone” on page 5-44.
●
As many as 6 CDs can be inserted into the CD auto- changer.
●
For information concerning
the handling of the compact
discs, refer to “Handling of compact discs” on page 5-74.
To s e t d i s c sTo set a single disc 1. Press the LOAD button (15) briefly. 2. The autochanger will show “WAIT” on the display and
start making itself ready for disc loading.
3. When the autochanger is read
y for disc loading, the indi-
cator light (A) will come on and the display will show “LOAD DISC (1~6)”.
4. Insert a disc into the disc loading slot.NOTE●
If there are multiple empty slots, you can select your desired slot by pressing the
DISC buttons (16 or 17).
●
If you do not insert a disc for about 15 seconds after the autochanger starts standing
by for loading, the loading
standby mode w
ill be canceled.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
61 Wednesday, January 9, 2008 4:41 PM

5-62 For pleasant driving
5
To set all the discs 1. Press the LOAD button (15) for 2 seconds or longer (until
you hear a beep).
2. The autochanger will select the lowest-numbered empty
slot and switch to loading standby mode.
3. When the display shows “LOAD DISC (1~6)”, insert a
disc. The autochanger will then
automatically select the
next empty slot and enter loading standby mode.
4. Repeat the above-described st
eps until every slot contains
a disc. Playback will then be
gin with the disc that you
inserted last.
NOTE●
If you press the LOAD button (15) again while the auto- changer is in loading stand
by mode, the loading standby
mode will be canceled.
To eject discsTo eject a single discPress the eject button
(7) briefly to eject
the currently selected
disc.NOTE●
If you press the eject button (7) while the display is show- ing “LOAD DISC (1~6)”, the loading standby mode will be canceled and the next disc will be ejected.
●
If you do not remove the disc before 15 seconds have elapsed, the autochanger wi
ll automatically reload the
disc and stop.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
62 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-63
5
To eject all the discs 1. Press the eject button (7) for 2 seconds or longer (until
you hear a beep).
2. The currently selected disc
will be ejected. When you
remove the ejected disc, the
next disc will automatically
be ejected.
3. Repeat the above-described steps until all of the discs
have been ejected. The autoch
anger will then enter load-
ing standby mode.
NOTE●
If you do not remove an ejected disc before 15 seconds have elapsed, the disc will be reloaded and the eject mode will be canceled. The reloaded
disc will not be played.
To select a desired discYou can select your desired disc by using the DISC button (16 or 17). The active disc will be
indicated by “ ” on the display.
Disc up Press the DISC button (16) repeatedly until the desired discnumber appears on the display. Disc down Press the DISC button (17) repeatedly until the desired discnumber appears on the display.
To listen to a music CDPush the CD button (4) if the
discs are already in the auto-
changer. The autochanger will
enter CD mode and start play-
back. The disc number, the track
number and the playing-time
will appear on the display. The
discs in the unit will be played
consecutively and continuously.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
63 Wednesday, January 9, 2008 4:41 PM

5-64 For pleasant driving
5
To listen an MP3 CDThis autochanger allows you to play MP3 (MPEG Audio Layer-3) files recorded on
CD-ROMs, CD-Rs (recordable
CDs), and CD-RWs (rewritabl
e CDs) in ISO9660 Level
1/Level 2, Joliet, and Romeo formats. Each disc may have amaximum of 16 trees, 100 folders, and 255 files per disc. Dur- ing MP3 playback, the unit can display ID3 tag information. For information concerning ID3 tag, refer to “CD text and MP3title display” on page 5-68. Push the CD button (4) if MP3
CDs are already in the auto-
changer.The display shows “READING”,
then playback will begin.
The folder number, the track
number, the playing-time and
“MP3” indicator will ap
pear on the display.
NOTE●
While listening to a disc on which CD-DA (CD-Digital Audio) and MP3 files have
both been recorded, you can
switch between reading of the CD-DA, reading of the MP3 files, and the external audio input mode (AUX) bypressing the CD button for 2 seconds or longer (until you hear a beep). AUX is operat
ive only when the vehicle is
equipped with a rear-seat display.
●
With a disc that contains bo
th CD-DA and MP3 files, the
CD-DA files are automa
tically played first.
●
The playback sound quality differs depending on the encoding software and the bit rate. For details, refer to the user manual of your encoding software.
●
Depending on file/folder configurations on a disc, it may take some time before playback starts.
●
MP3 encodin software and writing software are not sup- plied with this unit.
●
You may encounter trouble in playing an MP3 or display- ing the information of MP3 files recorded with certain writing software or CD recorders (CD-R/RW drivers).
●
If you record too many folders or files other than MP3 onto a disc, it may take some time before playback starts.
●
This unit does not record MP3 files.
●
For information concerning CD
-Rs/RWs, refer to “Notes
on CD-Rs/RWs” on page 5-76.
CAUTION
!●
Attempting to play a file not in MP3 format which has “.mp3” as file name may produce noise from the speakers and speaker damage, and can damage yourhearing.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
64 Wednesday, January 9, 2008 4:41 PM

5-66 For pleasant driving
5
To select a desired folder (MP3 CDs only)You can select your desired folder by pressing the FOLDER button (12 or 13). Folder up Press the FOLDER button (13) until the desired folder numberappears on the display. Folder down Press the FOLDER button (12) until the desired folder numberappears on the display.To select a desired track You can select your desired track by using the TRACK button(11). Track up Press the side of the TRAC
K button (11) repeatedly until
the desired track number appears on the display.
Track down Press the side of the TRACK button (11) repeatedly until the desired track number
appears on the display.
NOTE●
Pressing the side of the TRACK button (11) once dur- ing the song will cause the auto
changer to restart playback
from the beginning of the song.
To repeat a trackPress the RPT button (5) briefly while the track is playing. “RPT” will appear on the displa
y. To exit the repeat mode,
press the RPT button again.To repeat a disc (music CDs only)Press the RPT button (5) for 1 second or longer (until you heara beep). “D-RPT” will appear on the display. You can listen to the music CD repeatedly.To repeat a folder (MP3 CDs only)Press the RPT button (5) for 1 second or longer (until you hear a beep). You can listen to all the tracks in the currently selected folder repeatedly.NOTE●
The track repeat mode will
be canceled by pressing the
TRACK button (11), the SCAN button (14) or the eject button (7)
●
The disc repeat mode will
be canceled by pressing the
DISC button (16 or 17), the SCAN button (14) or the eject button (7).
●
With a disc that contains bo
th CD-DA and MP3 files, the
repeat mode causes only file
s of the same format (CD-DA
only or MP3 files only) to be repeated.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
66 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-67
5
To play tracks in random orderRandom playback for a disc (music CDs only) Press the RDM button (6) briefl
y. “RDM” will appear on the
display. Tracks on the currently se
lected disc will be played in
a random sequence.To exit the random mode, press the RDM button again. Random playback for a folder (MP3 CDs only) Press the RDM button (6) briefl
y. “RDM” will appear on the
display. Tracks in the currently selected folder will be played in a random sequence. To exit the random mode, press the RDM button again. Random playback for all discs in the autochanger (music CDs only) Press the RDM button (6) for 1 second or longer (until youhear a beep). “D-RDM” will ap
pear on the display. Tracks
from all the discs loaded in the
autochanger will be played in a
random sequence. To exit the random mode, briefly press theRDM button again.
Random playback for all folders on a disc (MP3 CDs only) Press the RDM button (6) for 1 second or longer (until you hear a beep). “D-RDM” will a
ppear on the display. Tracks
from all the folders on the cu
rrently selected disc will be
played in a random sequence. To
exit the random mode, briefly
press the RDM button again.NOTE●
In the all discs random mode, if an MP3 CD has been loaded in the autochanger, th
e autochanger will skip over
it to the next music CD.
●
With a disc that contains both CD-DA and MP3 files, the random mode causes only files of the same format (CD- DA only or MP3 files only) to be played in a random sequence.
To find the start of each track on a disc for playbackPress the SCAN button (14). “SCAN” will appear on the dis- play and the autochanger will play back the first 10 seconds of each track on the selected disc.The track number will blink while
the scan mode is selected.
To exit the scan mode,
press the SCAN button again.
NOTE●
Once all tracks on the disc have been scanned, playback of the disc will restart from the beginning of the track that was playing when scanning started.
●
The scan mode will be canceled when radio or CD opera- tion is selected.
●
With a disc that contains both CD-DA and MP3 files, the scan mode causes only files of the same format (CD-DAonly or MP3 files only) to be played.
BK-BK2008E1ENUK.en-uk-Section8.fm Page
67 Wednesday, January 9, 2008 4:41 PM

5-68 For pleasant driving
5
CD text and MP3 title display
E00725000403
This autochanger can display CD text and MP3 titles including ID3 tag information. CD text The autochanger can display disc
and track titl
es for discs
encoded with disc and track tit
le information. Press the DISP
button (3) repeatedly to make
selections in the following
sequence: disc name
→ track name
→ normal display mode.
NOTE●
The display can show up to 16
characters. If a disc name
or track name has more than
16 characters, press the
PAGE button (10) to view
the next 16 characters.
●
When there is no title information to be displayed, the dis- play shows “NO TITLE”.
●
Characters that the autochanger cannot display are shown as “ ”.
MP3 title The autochanger can display folder and track titles for discs encoded with folder and track in
formation. Press the DISP but-
ton (3) for less than 1 second repeatedly to make selections inthe following sequence: folder name
→ track name
→ normal
display mode.
Example
Disc name Track name
Example
Folder name Track name
BK-BK2008E1ENUK.en-uk-Section8.fm Page
68 Wednesday, January 9, 2008 4:41 PM

For pleasant driving
5-69
5
ID3 tag information The autochanger can display ID3 tag information for files that have been recorded with ID3 tag information. 1. Press the DISP button (3) for 2 seconds or longer to
switch to the ID3 tag information. “TAG” indicator will appear on the display.
2. Then press the DISP button fo
r less than 1 second repeat-
edly to make selections in the following sequence: album name
→ track name
→ artist name
→ normal display
mode.
NOTE●
To return from ID3 tag information to the folder name, press the DISP button (3) again for 2 seconds or longer.
●
When there is no title information to be displayed, the dis- play shows “NO TITLE”.
●
The display can show up to 16 characters. If a folder name, track name, or item of ID3 tag information hasmore than 16 characters, pr
ess the PAGE button (10) to
view the next 16 characters.
●
Folder names and track names can each be displayed up to a length of 32 characters. It
ems of ID3 tag information
can each be displayed up to a length of 30 characters.
●
Characters that the autocha
nger cannot display are shown
as “ ”.
To listen to a disc in the rear-seat display (vehicle with rear-seat display)
E00709700040
It is possible to listen to the
audio from the rear-seat display
using the vehicle’s speakers. Press the CD button (4) to sel
ect the rear-seat display mode.
The word “REAR” will appear at
the top-left of the display.
Each push of the CD button (4) changes the mode to the next one in the following sequence: CD changer
→ rear-seat display
mode
→ CD changer.
The following operation of the rear-seat display is possible from the audio system. To make your desired selection, use the TRACK button (11) or the FOLDER button (12 or 13) on the audio system.NOTE●
For more details about the rear-seat display, refer to the separate owner’s manual.
Source
Operation
CD Track selection
MP3/WMA Folder/Track selectionVideo CD Track/Scene selectionDVD video Title/Chapter selectionDVD audio Group/Track selection
BK-BK2008E1ENUK.en-uk-Section8.fm Page
69 Wednesday, January 9, 2008 4:41 PM