2008 MITSUBISHI GRANDIS display

For pleasant driving
5-35
5
Emergency broadcasts
E00721700011
If an emergency broadcast is caught while receiving a FM
broadcast or playing back a compact disc with the ignition
switch in “ACC” or “ON” position, the display will show
“ALARM” and the emergency broadcast will interrupt the cur-
rent program. The volume level is set separately for listening to
normal audio programs and for listening to emergency broad-
casts. The volume level will therefore change automatically to
that set when an emergency broadcast or traffic information
broadcast was last received. When the emergency broadcast is
over, the radio will return to the previously received program
and to the corresponding volume level.
Function setup mode
E00722500175
It is possible to change the following functions:
●AF
●CT
●REG
●TP-S
●Language of PTY display
1. Press the “MENU” button to select the function setup
mode.
BK-XP08E1ENUK.en-uk.book Page 35 Monday, August 13, 2007 2:20 PM

5-36 For pleasant driving
5
2. Press the “MENU” button repeatedly to select the mode
you wish to change. The order is: AF → CT → REG →
TP-S → PH → MUTE → Language of PTY display →
Function setup mode OFF.
NOTE●Although “PH” and “MUTE” appear on the display, the
PH and MUTE functions are inoperative.
BK-XP08E1ENUK.en-uk.book Page 36 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-37
5
3. Select the desired setting for each mode to be turned ON
and OFF as shown below.
The setting will be shown on the display.NOTE●After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the “MENU” button for at least 2 seconds.
• Make no entry for 7 seconds.
●For instructions on setting the language of PTY display,
refer to “To change the language of PTY display” on page
5-32.Example
BK-XP08E1ENUK.en-uk.book Page 37 Monday, August 13, 2007 2:20 PM

5-38 For pleasant driving
5
CD control panel and display
E00709500673
* Operates when equipped with a CD autochanger.
1- CD eject button
2- FOLDER (Folder down) button
3- FOLDER (Folder up) button
4- Disc loading slot
5- TRACK (Track down/up) button
6- SCAN button
7- AM/FM (FM/MW/LW selection) button
8- CD (CD mode changeover) button
9- TEXT (Title display) button
10- DISC (Disc down) button*
11- PAGE (Title scroll) button
12- DISC (Disc up) button*
13- PWR (On-Off) switch
14- RPT/RDM (Repeat/Random) button
15- CD indicator16- DISC indicator*
17- FOLDER indicator
18- TRACK indicator
19- NAME indicator
20- SCAN indicator
21- RPT (Repeat) indicator
22- MP3 indicator
23- Track play time display
24- RDM (Random) indicator
BK-XP08E1ENUK.en-uk.book Page 38 Monday, August 13, 2007 2:20 PM

5-40 For pleasant driving
5
To listen an MP3 CDThis CD player allows you to play MP3 (MPEG Audio Layer-
3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet,
and Romeo formats. Each disc may have a maximum of
16 trees, 100 folders, and 255 files per disc. During MP3 play-
back, the unit can display ID3 tag information. For information
concerning ID3 tag, refer to “CD text and MP3 title display” on
page 5-44.
1. Insert a disc containing MP3 files into the slot.
2. Press the CD button (8) for 2 seconds or longer to switch
to MP3 CD mode from normal music CD mode. The dis-
play shows “READING”, then playback will begin. The
folder number and the track number will appear on the
display.
NOTE●While listening to a disc on which both CD-DA (CD-Dig-
ital Audio) and MP3 files have been recorded, you can
switch between reading of the CD-DA, reading of the
MP3 files, and AUX (auxiliary input) by pressing the CD
button for 2 seconds or longer (until you hear a beep).
●With a disc that contains both CD-DA and MP3 files, the
CD-DA are automatically played first.
●The playback sound quality differs depending on the
encoding software and the bit rate. For details, refer to the
user manual of your encoding software.
●Depending on file/folder configurations on a disc, it may
take some time before playback starts.
●MP3 encode software and writing software are not sup-
plied to this unit.
●You may encounter trouble in playing an MP3 or display-
ing the information of MP3 files recorded with certain
writing software or CD recorders (CD-R/RW drivers).
●If you record too many folders or files other than MP3
onto a disc, it may take some time before playback starts.
●This unit does not record MP3 files.
●For information concerning CD-Rs/RWs, refer to “Notes
on CD-Rs/RWs” on page 5-51.
CAUTION
!●Attempting to play a file not in the MP3 format
which has the “.mp3” file name may produce noise
from the speakers and speaker damage, and can
damage your hearing.
BK-XP08E1ENUK.en-uk.book Page 40 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-41
5
Folder selection order/MP3 file playback order (Example)


To select a desired folder (MP3 CDs only)You can select your desired folder by pressing the FOLDER
buttons (2 or 3).
Folder up
Press the FOLDER button (3) until the desired folder number
appears on the display.
Folder down
Press the FOLDER button (2) until the desired folder number
appears on the display.
Folder selection
In the order
File selection
In the order
Root folder (root directory)
Tree 1 Tree 2 Tree 3 Tree 4
BK-XP08E1ENUK.en-uk.book Page 41 Monday, August 13, 2007 2:20 PM

5-42 For pleasant driving
5
To select a desired track You can select your desired track by using the TRACK button
(5).
Track up
Press the side of the TRACK button (5) repeatedly until the
desired track number appears on the display.
Track down
Press the side of the TRACK button (5) repeatedly until the
desired track number appears on the display.NOTE●Pressing the side of the TRACK button (5) once dur-
ing the song will cause the CD player to restart playback
from the beginning of the song.
To repeat a trackPress the RPT/RDM button (14) briefly while the track is play-
ing. “RPT” will appear on the display. To exit the repeat mode,
press the RPT/RDM button two times.NOTE●The repeat mode will be canceled by pressing the TRACK
button (5), the SCAN button (6) or CD eject button (1).
●With a disc that contains both CD-DA and MP3 files, the
repeat mode causes only files of the same format (CD-DA
only or MP3 files only) to be repeated.
BK-XP08E1ENUK.en-uk.book Page 42 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-43
5
To change the order of tracks for playbackRandom playback for a disc (music CDs only)
Press the RPT/RDM button (14) briefly. “RDM” will appear on
the display. Tracks on the currently selected disc will be played
in a random sequence.
To exit the random mode, press the RPT/RDM button again.
Random playback for all folders on a disc (MP3 CDs only)
Press the RPT/RDM button (14) briefly. “RDM” will appear on
the display. Tracks in the currently selected disc will be played
in a random sequence. To exit the random mode, press the
RPT/RDM button again.
NOTE●The random mode will be canceled by pressing the SCAN
button (6) or the CD eject button (1).
●With a disc that contains both CD-DA and MP3 files, the
random mode causes only files of the same format
(CD-DA only or MP3 files only) to be played in a random
sequence.
BK-XP08E1ENUK.en-uk.book Page 43 Monday, August 13, 2007 2:20 PM