2008 MERCEDES-BENZ SL ROADSTER lights

Lights
88
X
To switch on: turnthe light switch to
M orU.
The dipped-beam headlamps, side lamps
and licenc eplatelamp are switched on
when th eengineisr unning.
i When you tur nthe light switch to any
position other than MorU,t hecor-
respondin glight goes on.
Automatic headlamp mode The side lamps
,dipped-beam headlamps and
licenc eplatelamp are switched on or off
automatically, dependin gonthebrightness of
th ea mbient light. G
Ris
kofa ccident
If th elight switch is set to the Uposi-
tion, th elight will no tcom eona utomati-
cally in foggy conditions. This coul dendan-
ger you and others. Therefore, tur nthe light
switch to Bin thedark or in fog.
The automatic headlam pfeature is only an
aid. The driver is responsible for th evehi-
cle's lighting at all times. G
Ris
kofa ccident
When it is dark or foggy, tur nthe light
switch from UtoB in good time.
Otherwise, th eheadlamps could switch off
temporarily and you could caus eanacci-
dent.
X To switch on: turnthe light switch to
U.
The side lamps are switched on and off
automaticall ywhen th ekeyis in position
1 in th eignition lock.
The dipped-beam headlamps, side lamps
and licenc eplatelamp are switched on
automaticall ywhen th eengineisr unning.
When th eparking lamp or dipped-beam
headlamps are switched on ,the indicator
lamp next to th elight switch light sup.
Fron tfoglamps/Rear foglamp G
Ris
kofa ccident
If you suspect that driving conditions will be
foggy, tur nthe light switch to Bbefore
you start your journey. Otherwise, your
vehicle may no tbevisible and you could
endanger yourself and others. G
Ris
kofa ccident
When it is dark or foggy, tur nthe light
switch from UtoB in good time.
Otherwise, th eheadlamps coul dswitch off
temporarily and you coul dcaus eana cci-
dent.
When th elight switch is set to Uyou can-
no tswitch on th efront or rear foglamp.
X Mak esure that th ekeyis in position 2in
th ei gnition lock.
X To switch on th efront foglamps: turnthe
light switch to the BorC position.
X Pull th elight switch out to th efirst stop.
The ¥ green indicator lamp next to the
light switch light sup.
X To switch on th erearfoglamp: turnthe
light switch to BorC.
X Pull th elight switch out to th esecond
detent.
The † yellow indicator lamp next to the
light switch light sup.
X To switch off th efront foglamps/rear
foglamp: push in thelight switch to the
stop.
The corresponding indicator lamp goes out. Controls
230_AKB
;5;4,en-GB
bjanott ,V ersion: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 88 Dateiname: 6515_3089_02_buchblock.pdf; preflight

Lights
89Combination switch (turn signals,
main-beam headlamp
sand headlamp
flasher)
Turn signals Combination switch
1
Right-hand tur nsignal
2 Left-han dturns ignal
X To switch on: pressthe combination
switch in th edirection of arrow 1or2.
The corresponding tur nsignal indicator
lamp K orL in theinstrumen tclus-
te rf lashes.
i If you only wish to indicat eaminor change
of direction ,pres sthe combinatio nswitch briefly in th
eappropriat edirection .The cor-
respondin gturns ignal flashes three times.
Main-beam headlamps/headlamp flas-
her Combination switch
1
Main-beam headlamps
2 Headlamp flasher Main-beam headlamps
X
Mak esure that th ekeyis in position 2of
th ei gnition loc korthatthe engin eisrun-
ning.
X Turn th elight switch to BorU 12
.
X To switch on: pressthe combination
switch in th edirection of arrow 1.
The main-beam indicator lamp Ain the
instrumen tcluste rlight sup.
X To switch off: movethe combination
switch back to its normal position.
The main-beam indicator lamp Ain the
instrumen tcluste rgoes out.
Headlamp flasher
X To switch on: briefly pull thecombination
switch in th edirection of arrow 2.
12 In the Uposition, th emain-beam headlamps are only switched on when it is dark. Controls
230_AKB
;5;4,en-GB
bjanott ,V ersion: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 89 ZDateiname: 6515_3089_02_buchblock.pdf; preflight

Lights
90 Hazard warning lamps
Centre console
1
Hazard warnin glamp button
The hazar dwarnin glamps still operat eifthe
ignition is switched off .They switc honauto-
matically if an airbag is deployed or if you
brak esharply and brin gthe vehicle to ahalt
fro mas peed of more than 70 km/h.
X To switch on: press button1.
All tur nsignals flash. If you switc honthe
tur ns ignals using the combination switch
(Y page 89), the tur nsignals flash on the
correspondin gside of the vehicle.
X To deactivate: press button1. Headlam
pcleaning system 1
Button for headlamp cleaning system
X Make sure that the key is in position 2of
the ignition lock or that the engin eisrun-
ning.
X To switch on: briefly press button 1.
The headlamps are cleaned with ahigh-
pressure water jet.
The headlamps are cleaned automatically if
the "Wipe with windscreen washer fluid" func-
tion is operated 15 times while the light sare
on and the engin eisrunning. When you
switc hoff the ignition, the automatic head-
lamp cleaning system is reset and countin gis
resume dfrom0. Intelligent Light System*
The Intelligent Light System adapts the light-
ing of the front headlamps to the prevailing
driving conditions so that the road is better
illuminated.
The Intelligent Light System is only active
when it is dark.
The Intelligent Light System comprises:
R active light function
R cornering light
R motorway mode
R extended rang efoglamps
Active light function For the active light function
,the dipped-beam
headlamps swivel horizontally. The swivel
angle changes accordin gtothe respective
driving situation .The active light function is
not active when the vehicle is stationary.
Cornering light Specially designed headlamps light up the
area int
owhich you are driving when turning
corners.
If you are driving at speeds below 40 km/h,
the cornering light function is activated either Controls
*optional
230_AKB; 5; 4, en-GB
bjanott
,V ersion: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 90 Dateiname: 6515_3089_02_buchblock.pdf; preflight

Lights
91
by th
eturns ignal or when th esteering wheel
is turned. At speeds between 40 km/h and
70 km/h, only asteering wheel movement
activates th ecornerin glight function .Ifyou
are driving at speeds abov e70km/ hthe cor-
nerin glight function is deactivated.
Activating
X Mak esure that th eengineisr unning.
X Switch on th edipped-beam headlamps.
X Switch off th efoglamp.
X Switch on th eturns ignal.
The cornerin glight on th esame side as the
indicator lamp comes on ,even if you turn
th es teering wheel in th eopposit edirection
after indicating.
or
X Turn th esteering wheel in th edesired
direction.
When in aforwards gear :the cornering
lamp on th einside of th ebendc omes on.
When in revers egear :the cornerin glight on
th eo utside of th ebendc omes on. Deactivating
X
Turn th esteering wheel back to th estraight
ahead position.
The indicator lamp goes out .The cornering
lamp may remain lit for ashort time.
or
X Switch off th eindicator lamp.
The cornerin glamp may remain lit for a
short time.
The cornerin glight will go out after amaxi-
mum of three minutes.
Motorwa ymode Motorway mod
eoptimises th eilluminatio nof
th er oad by:
R controlling th ebrightness
R adapting th eheadlam prange
Motorway mod eisactivated if you are driving
faster than 11 0km/ hand do no tmakea ny
large steering movements for 1,000 m.
Extended range foglamps The extende
drange foglamps reduc ethe
glare experienced by th edriver and improve
th ei lluminatio noftheedge of th ecarriage-
way. X
To switch on: switch on therear foglamp.
The fron tfoglamps and rear foglamp are
switched on .The extende drange foglamps
are activated if you are driving slowe rthan
70 km/h.
X To switch off: switch off therear foglamp.
i The extende drange foglamps switch off
automaticall ywhen you driv efaster than
10 0k m/ h. Interior lighting
Overhead control panel
1
X To switch th eleft-hand reading lamp
on/off
2 X To switch th eright-han dreading
lamp on/off Controls
230_AKB
;5;4,en-GB
bjanott ,V ersion: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 91 ZDateiname: 6515_3089_02_buchblock.pdf; preflight

Automatic transmission
98
Parking brake
1
Releas ehandle
2 Parking brake
X To release: depress thebrake peda land
keep it depressed.
X Pull release handle 1.
X The 3 indicator lamp in th einstrument
cluster goe sout.
X To apply: depress parking brake 2firmly.
The 3 indicator lamp in th einstrument
cluster lights up if th eengineisr unning.
i On steep slopes ,tur nt he fron twheels
toward sthe kerb. Switchin
goff th eengine G
Risk of accident
If th eengineisn otrunning ,the re is no
powe rassistanc efor thes teerin gand
brakes. Steerin gand braking then takes
muc hmoree ffort.
As aresult ,you might los econtrol of the
vehicle, caus eanacciden tand injur eyour-
sel fand others.
Do no tswitch of fthe engin ewhile driving.
X Mov ethe selecto rlever to P.
Usin gthe key
X Tur nthe keyt op osition 0(Y page 73 )in
th ei gnition loc kand remov eit.
The immobilise risactivated.
Usin gKEYLESS GO*
X Press and hol dthe KEYLESS GO button
(Y page 73).
The engin estops and all th elamp sint he
instrumen tcluster go out (Y page 26). Automatic transmission
Introduction to th
etransmi ssion G
Risk of accident
The movemen tofthepedals mus tnotbe
impaire dinany way. Do no tkeepa ny
objects in th edriver's footwell. Mak esure
that floormat sorcarpetsare correctly
secure dand that there is sufficien tclear-
anc efor thep edals. G
Risk of accident
Do no tchang ed own fo radditional engine
braking on aslipper yroads urface. This
could caus ethe drive wheels to los etheir
grip and th evehicl ecould skid. Thi scould
caus eyou to los econtrol of your vehicle
and caus eanaccident. Cont
rols
*optional
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 98 Dateiname: 6515_3089_02_buchblock.pdf; preflight

Automatic transmission
104
Manua
lgearshif tprogram on th eSL63
AMG In manual gearshift program
M,you can
chang egear usin gthe steerin gwhee lgear-
shift paddles or th eselector lever. Manual
gearshift program Mcan be selected using
th ep rogram selector.
SL 63 AM Gprogram selector 1
Program selector C Fo
rc omfort mode S Fo
ra ll normal drivin gcon-
dition s(Sp ortp rogram) S+ SportPlus mode (with
shorter shift times) M Fo
rm anual gearshifting RS RACE START
i
RScanno tbeselecte dduring normal driv-
ing. Fo rfurther information on RACE
START ,see (Y page 138).
X To activate: turnp rogram selector 1
clockwise until Mappears in th espeedom-
eter display.
Indicator M1 on th eprogram selector
lights up in red.
If th eselecto rlever is in position D,you can
shift up or down through th egears. The gear
currentl yselecte dand engage disshown in
th ed isplay.
X To deactivate: turnp rogram selector 1
until Sor Cappears in th edisplay.
Upshifting
X Briefly press th eselecto rlever to th eright
towards D+
or X
Pull th eright-hand steerin gwhee lgearshift
paddle (Y page 102).
The automatic transmissio nshift suptot he
next gear.
! In manual gearshift program M,theauto-
matic transmissio ndoesn otshift up auto-
matically eve nwhen th elimitin gspeed for
th ec urren tgear is reached. Whe nthe lim-
itin gspeed is reached, th efue lsupply is cut
to preven tthe engin efromo verrevving.
You mus tmakes uret hatthe engin espeed
doe snotreach th ered are aoftherev coun-
ter. There is otherwise ariskofe ngine
damage.
X Shift up agear if th ecolour in th edisplay
changes to red and UPappears in th erev
counter.
Downshifting G
Risk of accident
Do no tchang ed own fo radditional engine
braking on aslipper yroads urface. This
could caus ethe drive wheels to los etheir
grip and th evehicl ecould skid.
X Briefly press th eselecto rlever to th eleft
towards D-
or Cont
rols
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6 2008-04-08T15:09:54+02:00-Seite 104 Dateiname: 6515_3089_02_buchblock.pdf; preflight

Instrument cluster
105
X
Pull th eleft-han dsteerin gwhee lgearshift
paddl e(Ypage 102).
The automati ctransmissio nshift sdown to
th en extg ear.
i Form aximum acceleration ,pull th eleft-
han dsteerin gwhee lgearshift paddl euntil
th et ransmissio nselect sthe optimum gear
fo rt he curren tspeed.
Kickdown
i It is no tpossibl etouse kickdown in man-
ual gearshift program Mon vehicles with
AM Ge ngines. Instrument cluster
Points to remember
You will fin danillustration of th einstrument
cluster in th e"At ag lance "section
(Y page 26). G
Risk of accident
If th einstrument cluster or multi-function
display fails, no display message scan be
displayed.
This mean stha tyou will no tsee information
about th edrivin gsituation ,suc hast he
speed, outside temperature, warning/indi-
cator lamps, display message sorsystem
failures .Handlin gcharacteristics may be
affected. Adapt your drivin gstyle and
speed accordingly.
Immediately consult aqualified specialist
workshop whic hhas th eneces saryspecial-
ist knowledge and tools to carry out the
wor krequired. Mercedes-Ben zrecom-
mends that you use aMercedes-Benz
Service Centr efor this purpose .Inparticu-
lar, wor krelevan ttosafetyoro nsafety-
relate dsystems mus tbecarriedout at a
qualified specialist workshop. Activating th
emulti-function display
X Switc hont heignition.
The multi-function display is also activated
when you:
R switch on th elights
R press th ereset butto nontheleft-han dside
of th einstrument cluster
R open adoor Adjusting th
einstrument cluster
lighting
X Brighte rordimmer: turnthe reset button
in th einstrument cluster clockwise or anti-
clockwise. Cont
rols
230_AKB; 5; 4, en-GB
bjanott,
Version: 2.9.6
2008-04-08T15:09:54+02:00
-Seite 105 ZDateiname: 6515_3089_02_buchblock.pdf; preflight

On-boar
dcomputer 118
X
Press the æorç buttontos elect
kilometres ormiles as the unit of meas-
urement for distance.
X Press the j,èorÿ buttonto
select adifferen tdisplay.
Selecting the distance units for the dig-
ital speedometer This function is not available on vehicles with
speedometers in mph.
X
Press èor· to select the Set-
tings menu.
X Press the jbuttontos elect submenus.
X Press the æorç buttontoselect the
Inst. cluster submenu.
X Press the jbuttontos electDigital
speedometer.
X Press the æorç buttontos elect
kilometres ormiles as the unit of meas-
urement for distance.
X Press the j,èorÿ buttonto
select adifferen tdisplay. Selecting the language X
Press èor· to select the Set-
tings menu.
X Press the jbuttontos elect submenus.
X Press the æorç buttontoselect the
Inst. cluster submenu.
X Press jto select Language.
X Press the æorç buttontoselect the
desired language.
X Press the j,èorÿ buttonto
select adifferen tdisplay.
Selecting the status line display Vehicles for the United Kingdom
:this func-
tion is not available.
X Press èor· to select the Set-
tings menu.
X Press the jbuttontos elect submenus.
X Press the æorç buttontoselect the
Inst. cluster submenu.
X Press the jbuttontos electSelect
display . X
Press the æorç buttontoselect the
status line display: outside temperature
(Outsid etemp.)ors peed (Speed).
The selected display now appears con-
stantly in the status line of the speedome-
ter. You can see the display you have not
selected by scrolling through the Standard
display menu (Y page 110).
X Press the j,èorÿ buttonto
select adifferen tdisplay.
Setting constant headlamp mode If you have set constan
theadlamp mode and
the light switch is in position MorU,
the side lamps, dipped-beam headlamps and
licenc eplate lightin gare switched on auto-
matically when the engin eisrunning. Turning
the light switch to adifferen tposition
switches on the correspondin glights. Make
sure the light switch is set to BorU if
you switch off the constan theadlamp mode
while driving at night.
In countries in which constan theadlamp
mode is alegal requirement, Constantis the
factory setting. Controls
230_AKB
;5;4,en-GB
bjanott, Version:2.9.6
2008-04-08T15:09:54+02:0
0-Seite 118 Dateiname: 6515_3089_02_buchblock.pdf; preflight