2008 GEELY CK turn signal

212II.INSTALLATION1. Install the electrical connector of the headlamp assembly.
2. Install the headlamp assembly and the 3 mounting bolts.
3. Install the front bumper.
4. Adjust the condition of the vehicle.
5. Adjust the headlamp beam.III.HEADLAMP BULB REPLACEMENT1 - LOW BEAM DUST COVER 2 - HIGH BEAM DUST COVER 3 - TURN SIGNAL LAMP DUST
COVER 4 - HEADLAMP HOLDER
1. Replace the high and low beam bulbs
y Turn and remove the dust cover counter-clockwise
y Pull out the bulb plug
y Press and release the wire clip
y Pull out the lamp-holder, and remove the bulb
y Replace the bulb
2. Replace the turn signal lamp bulbs
y Remove the 3 screws on the dust cover with screwdriver
yTurn the lamp-holder counter-clockwise. Pull out the lamp-holder, and remove the bulb
yReplace the bulb
3. Replace the headlamp bulbs
yTurn the lamp-holder counter-clockwise. Pull out the lamp-holder, remove the bulb, and replace the
bulb.1 2 3 4

224Section 2 Audio System Connector Terminal Layout1. Connector terminal layout on wire harness
2. Connect terminal definitionTerminal
No.Func tion Wire color Condition Standard Voltage
A1 FR+ Lg The audio system is onWave form is synchronized w ith
the output sound
A2 FL+ YB The audio system is onWave form is synchronized w ith
the output sound
A3 ACC RW Ignition sw itc h turned to ACC 10
～14V
A4 B+ R Constant Status 10
～14V
A5 FR- LgR The audio system is onWave form is synchronized w ith
the output sound
A6 FL- Y The audio system is onWave form is synchronized w ith
the output sound
A7 GND B Constant Status Continuity
A8 N u ll
A9 N u ll
A1 0 T AI L G WPosition lamp switc h turned to
ON10
～14V
B1 RR+ PB The audio system is onWave form is synchronized w ith
the output sound
B2 RL+ YR The audio system is onWave form is synchronized w ith
the output sound
B3 RR- P The audio system is onWave form is synchronized w ith
the output sound
B4 N u ll
B5 N u ll
B6 RL- YW The audio system is onWave form is synchronized w ith
the output sound
C1 B+ Constant Status 10
～14V
C2 BUS Audio s ystem is On Pulse Signal
C3 GND Constant Status Continuity
C4 ACC Ignition sw itc h ACC 10
～14V
C5 Null
C6 R-OUT The audio system is onWave form is synchronized w ith
the output sound
C7 L-OUT The audio system is onWave form is synchronized w ith
the output sound
C8GND(Audio
Frequenc y)Constant Status Continuity

2339.CD can not eject after inserted
(1) Check if the CD box power supply is NORMAL
1Turn the ignition switch to ACC
2Check the continuity between the CD box terminals under each operating condition as shown in the table
below
Standard:
3 Check the voltage between terminals under each operating condition as shown in the table below.
Standard:
Normal:Replace CD, DVD box
Abnormal:Check if the head unit side C socket voltage output is NORMAL
(2) Check if the head unit side C socket voltage output is NORMAL
1Turn the ignition switch to ACC
2Check the continuity between the magnet head unit C socket terminals under each operating condition as
shown in the table below
Standard:
3 Check the voltage between terminals under each operating condition as shown in the table below.
Standard:
Normal:Replace the signal wire connecting magnet head unit and CD box
Abnormal:Check the radio assembly (+B, ACC, GND)
(3) Check the radio assembly (+B, ACC, GND)
1Check the continuity between terminals under each operating condition as shown in the table below.
Standard:Teste r Connec tion Condition Sta nda rd Sta tus
+B - GND Consta nt Status 10～
14V
ACC - GND Ignition switch ACC or ON 10～
14VTester connection Condition Standard Status
GND Consta nt Status ContinuityTester connection Condition Standard Status
GND Consta nt Status ContinuityTester connection Condition Standard Status
GND Consta nt Status ContinuityTeste r Connec tion Condition Sta nda rd Sta tus
+B - GND Consta nt Status 10～
14V
ACC - GND Ignition switch ACC or ON 10～
14V