2008.5 Citroen C5 Owner's Manual

95
6
L A Y O U T
SUN VISOR
System which protects against sun
from ahead or from the side and
courtesy system with illuminated
mirror. SKI FLAP
A fl ap in the backrest, located to the
rear of the armrest, facilitates the
carrying of long objects.

 With the ignition on, lift the fl ap;
the mirror is illuminated automati-
cally.
To prevent dazzle from ahead, fold
the visor downwards.
It can be disengaged from its central
fi xing and pivoted over to the side
windows if required. AIR CONDITIONED
GLOVEBOX

 To open the glovebox, pull on the
handle and lower the lid.
The glovebox has a manually clos-
able air conditioning vent B .
It has 2 or 3 sockets C to connect
audio/video equipment.
It has automatic lighting.
It provides access to the dashboard
fusebox.

Whilst driving, the
glovebox should be kept
closed. To open

 Lower the rear armrest.

 Pull the fl ap handle down.

 Lower the fl ap.

 Load the objects from inside the
boot.
Ensure that the objects are well se-
cured and that they do not impede
the operation of the gear lever.

96
6
L A Y O U T
MATS
Removing

 Slide the seat back as far as pos-
sible,

 unclip the fi xings,

 remove the fi xings, then the mat.
Refi tting

 Position the mat correctly,

 clip the fi xings,

 check that the mat is held is
place correctly. To avoid any interference with the
pedals:
- only use mats which are suit-
able for the fi xings already
present in the vehicle. The use
of these fi xings is essential,
- never fi t more than 1 mat.
The use of a mat not approved by
CITROËN may obstruct access to
the pedals and hinder the cruise
control/speed limiter function.
Floor mats approved by CITROËN
are fi tted with a 3rd fi xing located in
the pedal area to avoid any risk of
interference with the pedals.
FRONT ARMREST
Comfort and storage system for the
driver and front passenger. Adjustment
To optimise your driving position:

 lift the control A ,

 push the armrest forwards.
The armrest returns to its initial posi-
tion when you push it rearwards.

 Lift the armrest to access the cup
holder.
Equipment available for the driver
and front passenger.
Cup-holder

96
6
L A Y O U T
MATS
Removing

 Slide the seat back as far as pos-
sible,

 unclip the fi xings,

 remove the fi xings, then the mat.
Refi tting

 Position the mat correctly,

 clip the fi xings,

 check that the mat is held is
place correctly. To avoid any interference with the
pedals:
- only use mats which are suit-
able for the fi xings already
present in the vehicle. The use
of these fi xings is essential,
- never fi t more than 1 mat.
The use of a mat not approved by
CITROËN may obstruct access to
the pedals and hinder the cruise
control/speed limiter function.
Floor mats approved by CITROËN
are fi tted with a 3rd fi xing located in
the pedal area to avoid any risk of
interference with the pedals.
FRONT ARMREST
Comfort and storage system for the
driver and front passenger. Adjustment
To optimise your driving position:

 lift the control A ,

 push the armrest forwards.
The armrest returns to its initial posi-
tion when you push it rearwards.

 Lift the armrest to access the cup
holder.
Equipment available for the driver
and front passenger.
Cup-holder

97
6
L A Y O U T
REAR ARMREST
Comfort and storage system for the rear passengers.
Cup-holder
The rear cup-holder A is located in the rear central armrest.
 Lower the rear armrest.
 Pull forwards to extract the cup-holder.
Storage
 Lift up the upper part of the rear central armrest to access storage space B .
12 V ACCESSORIES SOCKET
SIDE BLINDS

 Pull on the tab A and position the
blind on the hook B .
REAR BLIND (SALOON)

 pull on the tab C to unroll the
blind,

 position the blind on the hooks D . This is located in the rear ashtray.
Max power: 100 W.
Driver's oddments tray

 Pull the handle towards you.

97
6
L A Y O U T
REAR ARMREST
Comfort and storage system for the rear passengers.
Cup-holder
The rear cup-holder A is located in the rear central armrest.
 Lower the rear armrest.
 Pull forwards to extract the cup-holder.
Storage
 Lift up the upper part of the rear central armrest to access storage space B .
12 V ACCESSORIES SOCKET
SIDE BLINDS

 Pull on the tab A and position the
blind on the hook B .
REAR BLIND (SALOON)

 pull on the tab C to unroll the
blind,

 position the blind on the hooks D . This is located in the rear ashtray.
Max power: 100 W.
Driver's oddments tray

 Pull the handle towards you.

98
6
L A Y O U T
BOOT LAYOUT (SALOON)

1. Battery for vehicles with V6 HDi
engine.

2. Pull strap (spare wheel storage).
3. Boot lamp.

4. 6 CD changer. Luggage securing rings

 Use the 4 securing rings on the
boot fl oor to secure your lug-
gage.
For safety reasons in the event of
sharp braking, you are advised to
place heavy objects as far forward
in the boot as possible.

99
6
L A Y O U T
BOOT LAYOUT (TOURER)

1. Hook
Allows you to hook shopping bags.

2. Torch
To recharge, return it to its stor- age position.

3. Storage net or Battery com-
partment (for vehicles with V6
2.7 HDi engine).
This provides access to the bat- tery.
1. Luggage-cover blind
(see details on following page)

2. Luggage securing rings
Use the 4 stowing rings provided on the boot fl oor to secure your
loads.
For safety reasons in the event of sharp braking, you are ad-
vised to place heavy objects as
far forwards as possible.

3. Hooks
These allow a cargo net to be fi tted (see details on following
page).
1. Boot lamp

2. 12 V accessories socket
(100 W maximum)
Cigar-lighter type 12 volts sock- et. It is located on the rear right-
hand trim, and is supplied from
the ignition position.

3. Loading
height control
You can change the height of the vehicle in order to make loading
or unloading easier.

4. Hook
Allows you to hook shopping bags.

5. Storage net or 6 CD changer

100
6
L A Y O U T
LUGGAGE COVER (TOURER)
To roll up

 Press the handle (PRESS) gently.
The luggage cover rolls up auto-
matically.
The moving part A can be folded
along the rear bench seat backrest.
To remove

 Compress the control 1 and lift
the luggage cover on the right
then on the left to remove it.
To install

 Position the left-hand end of the
luggage cover roller in its loca-
tion B behind the rear bench
seat.

 Compress the roller control 1
and put the roller in place in its
location C on the right.

 Release the control to secure
the luggage cover.

 Unroll it to its fastening on the
rear pillar. High load retaining net
(Tourer)
Hooked onto the special upper and
lower fi xings, this permits use of the
entire loading volume up to the roof:
- behind the rear seats (row 2),
- behind the front seats (row 1)
when the rear seats are folded.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.