2007 TOYOTA LAND CRUISER Navigation Manual

ix
7“Map” switch
You can select a destination simply by
touching the location on the displayed map.
xlv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8“Intersection” switch
You can enter the names of two intersecting
streets. This is helpful if you do not know the
specific street address of your destination
but know the general vicinity. xlv. . . . . . . . .
9“Freeway Ent./Exit” switch
You can enter the name of a freeway (inter-
state) entrance or exit. xlvi. . . . . . . . . . . . . .
10“Phone #” switch
You can enter a destination by the telephone
number. xlviii. . . . . . . . . . . . . . . . . . . . . . . . .
11“Coordinates” switch
You can set a destination using latitude and
longitude as coordinates. xlvii. . . . . . . . . . .
12Quick access switch
You can select one of 5 preset destinations
directly. To use this function, it is necessary
to set the “Attribute” for each memory point.
(To register a “Quick Access”, see page
lxxxi.)
xxxii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13Home switch
You can select your own home without en-
tering the address each time. To use this
function, it is necessary to set the “Attribute”
for the memory point. (To register “Home”,
see page lxxxi.) xxxii. . . . . . . . . . . . . . . . . .
14“Change” switch
To change the search area, touch this
switch.
xxx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

xThe switches below perform the follow-
ing operations.
1“Map DVD” switch
Displays information regarding the disc ver-
sion or covered area. xii. . . . . . . . . . . . . . . .
2“Select User” switch
Enables recall of up to three memorized user
setting patterns. lxxiv. . . . . . . . . . . . . . . . . .
3“Setup” switch
Enables various settings for the navigation
system. lxxxvii. . . . . . . . . . . . . . . . . . . . . . . .
4“My Places” switch
Enables changes to “Memory points” and
“Areas to avoid”. lxxvii. . . . . . . . . . . . . . . . . .
5“Suspend Guidance” and “Resume
Guidance” switch
Suspends or resumes guidance.
lxxiii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6“Volume” switch
Sets the volume for voice guidance.
lxxiv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
— “Menu” screen

i
BASIC FUNCTIONS
Basic information before operation
Touch switch operationii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inputting letters and numbersii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current position displayiv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen scroll operation (one−touch scroll)v . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map scaleviii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Orientation of the mapix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of the navigation systemx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map database information and updatesxii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION I

ii
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent dam-
age to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.Do not use objects other than your finger
to touch the screen.
INFORMATION
If the system does not respond to a
touch of a switch, move your finger
away from the screen and then
touch it again.
You cannot operate dimmed
switches.
Wipe off fingerprints on the surface
of the display using a glass cleaning
cloth.
The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
When you look at the screen through
polarised material such as polarised
sunglasses, the screen may be dark
and hard to see. If so, change the
angle of the screen or take off your
sunglasses.
Inputting letters and numbers
When searching for an address or a name,
or entering a memo, you can input letters
and numbers via the touch screen.
To input letters
To display the alphabet keys, touch the
“AZ” switch or the “ÀÝ” switch.
Enter letters by touching the alphabet keys
directly.
:Touching this switch erases one
letter. Holding this switch will con-
tinue to erase letters.

iii
To input numerals and symbols
To display the number keys and symbol
keys, touch the
“09” switch.
Enter numerals and symbols by touching the
number keys and symbol keys directly.
:Touching this switch erases one
letter. Holding this switch will con-
tinue to erase letters.
:Touching this switch displays other
symbols.
To display the list
To search for an address or a name, touch
the “List” switch. Matching items from the
database are listed even if the entered ad-
dress or name is incomplete.
If the number of matches is four or less, the
list is displayed without touching the
“List”
switch.
INFORMATION
The number of matching items is
shown to the right side of the screen.
If the number of matching items is
more than 9,999, the system displays
“
∗∗∗∗” on the screen.

iv
List screen operation
When a list is displayed, you can scroll or
page through the list by using the appropri-
ate switch.
To shift to the next or previous
page.
To scroll up or down one item at a
time.
This expresses a displayed
screen position.
If appears to the right of the
item name, the complete name is
too long for the display. Touch
to scroll to the end of the name.
Touch to scroll to the
beginning of the name.Current position display
When starting the navigation system, the
current position is displayed first.
This screen displays the current vehicle
position and a map of the surrounding local
area.
The current vehicle position mark appears in
the center or bottom center of the map
screen. You can return to this map screen
showing your current position at any time
from any screen by touching the
“MAP/
VOICE”
button.
During driving, the current vehicle position
mark is fixed in the screen and the map
moves.

v The current position is automatically set as
your vehicle receives signals from the GPS
(Global Positioning System). If your current
position is not correct, it is automatically cor-
rected after your vehicle receives signals
from the GPS.
INFORMATION
After the battery disconnection, or
on a new vehicle, the current posi-
tion may not be correct. As soon as
the system receives signals from the
GPS, the correct current position is
displayed.
To correct the current position
manually, see page lxxxviii.
Screen scroll operation
(onetouch scroll)
Touch any point on the map and that
point moves to the center of the screen
and is shown by the cursor mark.
If you wish to look at a point on the map
which is different to your current vehicle
position, you can bring the desired point to
the center of the screen by using the scroll
feature.
If you continue to hold your finger on the
screen, the map will continue scrolling in that
direction until you lift your finger.After you scroll the screen, the map remains
centered at the selected location until you
activate another function. The current ve-
hicle position mark will continue to move
along your actual route and may move off
the screen. When you touch the
“MAP/
VOICE” button, the current vehicle posi-
tion mark returns to the center of the screen
and the map moves as you proceed along
the designated route.
INFORMATION
When you use the onetouch scroll
feature, the current vehicle position
mark may disappear from the screen.
Move the map with a onetouch scroll
again or push the
“MAP/VOICE”button to return to the current vehicle
position map location display.

vi
To set the cursor position as a des-
tination
You can set a specific point on the map as a
destination using the one−touch scroll func-
tion.
Touch the “Enter ” switch.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “ — Enter-
ing destination” on page xlviii.)
If there is already a preset destination, touch
the
“Add to ” switch or the “Replace
” switch.
When there is already a preset destination,
using the
“Add to ” switch to set an
additional destination, will set the new one
as the first point of arrival.
To register the cursor position as a
memory point
Memory point registration enables easy ac-
cess to a specific point.
Touch the “Mark” switch.
When you touch the
“Mark” switch, the
following screen appears for a few seconds,
and then the map screen returns.
The registered point is shown by on the
map.
To change the icon or name, etc., see page
lxxix.
You can register up to 106 memory points.
If you attempt to register more than 106, a
message appears for confirmation.