2007 TOYOTA LAND CRUISER Navigation Manual

lxiii
Route preview
1. Touch the “Map View” switch.
2. Touch the “Route Preview”switch.
:To indicate the next destination.
:To preview the route to the next des-
tination.
:To preview the route to the next des-
tination in fast−forward mode.
:To stop the preview.
:To review the route to the previous
destination or starting point.
:To review the route to the previous
destination or starting point in fast−
forward mode.
:To indicate the previous destination
or starting point.
Screen configuration
You can choose any one of the screen
configurations.
1. Touch this switch to display the fol-
lowing screen.
2. To select the desired screen configu-
ration, touch one of the following
switches.

lxiv Depending on the conditions, it may not be
possible to select certain screen configura-
tion switches.
:To display single map screen. (See
page lxiv.)
:To display dual map screen. (See
page lxiv.)
:To display compass mode screen.
(See page lxv.)
:To display turn list screen. (See
page lxv.)
:To display arrow screen. (See page
lxvi.)
:To display freeway information
screen. (See page lxvi.)
:To display intersection guidance
screen or guidance screen on free-
way. (See page lxvii.)
(a) Single map
The screen shows the single map.
(b) Dual map
The screen shows the dual map. The map
on the left is the main map.
You can edit the right side map by touching
any specific point on the right side map.

lxv
This screen can perform the following
procedures.
Changing the map scale
Displaying the POI icon
Changing the orientation of the map
Touch the
“OK” switch when you complete
editing. The screen returns to the dual map
screen.
(c) Compass mode
Information about the destination and cur-
rent position, as well as a compass, is dis-
played on the screen.
The destination mark is displayed in the di-
rection of the destination. When driving, re-
fer to the longitude and latitude coordinates
and the compass, to make sure that your ve-
hicle is headed in the direction of the des-
tination.
INFORMATION
When the vehicle goes out of the disc
area, the guidance screen changes into
compass mode.
(d) Turn list screen
The screen shows the turn list. You cannot
scroll through the list of roads.

lxvi
(e) Arrow screen
The screen shows the current road name
and the distance to the next corner.
(f) Freeway information screen
This screen displays the distance to the next
junction and exit, or POIs in the vicinity of the
freeway exit.
“Map”: To display the selected map of the
exit vicinity.
On the left side of the
“Map” switch, up to
five POIs around the selected exit are dis-
played.
:To scroll for farther junctions or exits.
:To scroll for closer junctions or exits.
:To scroll for the closest three junc-
tions or exits.
INFORMATION
When you drive on a freeway, the
screen is automatically divided into
two parts, with freeway information
screen on the right side.

lxvii
(g) Intersection guidance screen/
guidance screen on freeway
Intersection guidance screen
This screen automatically appears when the
vehicle approaches an intersection on the
road.
The distance to the intersection is shown at
the bottom of the screen.
“OFF”: The intersection guidance screen
disappears and the map screen appears.
When touching the
switch or pushing
the
“MAP/VOICE” button, the intersec-
tion guidance screen reappears.
INFORMATION
Intersection guidance can be turned on
or off. (See page xcvii.)
Guidance screen on freeway
This screen automatically appears when the
vehicle approaches a junction or exit on a
freeway.
The distance to the junction or exit is shown
at the bottom of the screen.
“OFF”: The guidance screen on freeway
disappears and the map screen appears.
When touching the
switch or pushing
the
“MAP/VOICE” button, the guidance
screen on freeway reappears.
INFORMATION
Guidance screen on freeway can be
turned on or off. (See page xcviii.)
Distance and time to
destination
When the vehicle is on the guidance
route, the distance and the estimated
travel time to the destination are dis-
played. When the vehicle is not on the
guidance route, the distance to and the
direction of the destination are dis-
played.
When driving on the guidance route and
more than one destination is set, the dis-
tance and the estimated travel time from cur-
rent position to each destination are dis-
played.
1. Touch this switch to display the fol-
lowing screen.

lxviii
2. Touch the number switch of the des-
tination you wish to display.
The distance and the estimated travel time
from the current position to the selected des-
tination are displayed.
Displayed while driving along the
guidance route.
Displayed while driving off the
guidance route. The destination
direction is indicated by an arrow.
INFORMATION
When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time is calcu-
lated based on the set vehicle speed in-
formation. (For details, see page xci.)
However, when the vehicle is not on the
guidance route, the distance is the lin-
ear distance between the current posi-
tion and the destination.
Foot print map
For the area which is covered by the foot
print map (Some areas in the following cit-
ies; Detroit, Chicago, N.Y., L.A), you can
switch to the foot print map on a scale of 75
feet (25 m).
To switch to the foot print map
The
switch changes into the
switch when the map is scaled down to 150
feet (50 m).
To display the foot print map, touch the
switch.
To delete the foot print map display
Touch the
switch.

lxix
INFORMATION
If the map or the current position is
moved to the area which is not cov-
ered by the foot print map, the
screen scale automatically changes
to 150 feet (50 m).
On the foot print map, a one way
street is displayed by .
It is not possible to perform scrolling
on the foot print map (onetouch
scroll) while driving.
To display building information
Information is available only for buildings for
which information is recorded on the map
disc.
1. Touch the “Info.” switch while the
foot print map is displayed.
If the map is displayed in split screen, it
turned into a single map display.
2. Using an eightdirection arrow, move
the cursor to the position of the building
you wish to display information.
3. Touch the
“Building Info.” switch.

lxx
4. Details of POIs in some buildings may
be displayed. If you wish to see detailed
POI information, touch the building na-
me. You can see the detail of the selected
POIs.