2007 TOYOTA LAND CRUISER Navigation Manual

lxxxvii
(c) Deleting area to avoid
1. Touch the “Delete” switch of the
“Areas to Avoid” to display the “Delete
Area to Avoid” screen.
2. Touch the area you wish to delete
from the list.
“Delete all”: To delete all registered areas to
avoid in the system.
3. To delete, touch the
“Yes” switch.
To cancel the deletion, touch the
“No”
switch.
Setup
You can set the items shown on the “Set-
up” screen.
1. Push the
“MENU” button.
2. To display the “Setup” menu screen,
touch the
“Setup” switch. Touch the
items you wish to set.
3. Touch the “OK” switch on the screen
and then the previous screen will be dis-
played.
“Default”: This switch initializes all of the
settings.
“Calibration”: You can adjust the current
vehicle position mark manually.
“Distance”: You can select “km” or “miles”
as the distance unit.
“Estimated Travel Time”: You can set the
system to display the travel time to the des-
tination on the route guidance screen.
“Auto Reroute”: You can set the system to
automatically search for a new route to the
destination.
“Adjust Time Zone”: You can select your
desired time zone.
“Auto Voice Guidance”: You can set the
automatic voice guidance.

lxxxviii “Voice Guidance in All Modes”: You can
set the voice guidance in all modes.
“Notify Traffic Restriction”: You can select
notification of seasonal restrictions.
“Intersection Guidance”: You can select
ON or OFF to display of intersection guid-
ance.
“Guidance Screen on Freeway”: You can
select ON or OFF to display the guidance
screen on the freeway.
“Street Name on Scroll Map”: You can se-
lect ON or OFF to display the street name on
the scroll map.
“Display Building Shape”: You can select
ON or OFF to display the building shape on
the map screen.
“
Function”: You can set to display or
not to display each switches and current
street name on the map screen.
“Show POI Icons”: You can choose 6 icons
displayed on “Show POI Icons” top screen.
“Previous Point”: You can delete the pre-
vious destination.
“Map Color (Day)”: You can select the de-
sired map color.
“Map Color (Night)”: You can select the de-
sired map color.“Screen Animation”: You can set some
screen displays to be animated.
Current position calibration
When driving, the current vehicle posi-
tion mark will be automatically corrected
by GPS signals. If GPS reception is poor
due to location, you can manually adjust
the current vehicle position mark.
1. Push the “MENU” button to display
the “Menu” screen, and then touch the
“Setup” switch.

lxxxix
2. Touch the “Adjust” switch of “Cal-
ibration”.
3. Touch the “Position/Direction”
switch.
INFORMATION
For additional information on the accu-
racy of a current vehicle position, see
“Limitations of the navigation system”
on page x.Position/Direction calibration
1. Touch the scroll arrows to move the
cursor to your desired location.
Touch the
“Enter” switch.

xc
2. Touch either the or switch to
adjust the direction of the current vehicle
position mark.
Touch the
“Enter” switch and the map
screen will be displayed.
Tire change calibration
The tire change calibration function will
be used when replacing the tires. This
function will adjust the miscalculation
caused by the circumference difference
between the old tires and new ones. If
this procedure is not performed when
tires are replaced, the current vehicle
position mark may be incorrectly dis-
played.
To perform a distance calibration procedure,
touch the
“Tire Change” switch on the
“Calibration” screen.
The message appears and the quick dis-
tance calibration is automatically started. A
few seconds later, a map screen will be dis-
played.
Distance unit
1. Push the “MENU” button.
2. Touch the “Setup” switch.

xci
3. Touch the “km” or “miles” switch
of “Distance” to choose the distance
unit.
The selected switch is highlighted in green.
4. Touch the
“OK” switch.
Estimated travel time
You can set the speed that is used for the
calculation of the estimated travel time.
1. Push the “MENU” button.
2. Touch the “Setup” switch.
3. Touch the “Set Speed” switch of
the “Estimated Travel Time”.

xcii
4. Touch or to set the average
vehicle speeds for driving on a Freeway,
Main street, and Residential.
To set the default speeds, touch the
“De-
fault”
switch.
5. When you finish setting the desired
speeds, touch the
“OK” switch.
INFORMATION
The displayed time to the destination
is the approximate driving time that
is calculated based on the speeds
you selected and your actual posi-
tion along the guidance route.
The time shown on the screen may
vary greatly depending on your
progress along the route, which may
be affected by road conditions such
as traffic jams, construction work.
It is possible to display up to 99
hours 59 minutes.
Auto reroute
When the “Auto Reroute” feature is
turned on, the system will automatically
search for a new route to the destination
if you strays from the guidance route.
This feature does not operate while you
are driving on roads where guidance is
not available.
To turn the “Auto Reroute” mode on:
1. Push the
“MENU” button.
2. Touch the “Setup” switch.

xciii
3. Touch the “On” switch of “Auto
Reroute”.
The selected switch is highlighted in green.
INFORMATION
If your vehicle strays from the guidance
route, the system searches for a new
route to the destination. The new route
may or may not take you back to the
previous route depending on how far
you are off the original guidance route.
Adjusting time zone
1. Push the “MENU” button.
2. Touch the “Setup” switch.
3. Touch the “Change” switch. The
“Adjust Time Zone” screen appears on
the display.

xciv
4. Touch the desired time zone.
The selected switch is highlighted in green.
5. Touch the
“OK” switch on the screen
and the “Setup” screen will be displayed.
Auto voice guidance
When the “Auto Voice Guidance” feature
is turned on, the voice guidance can be
heard automatically.
When the “Auto Voice Guidance” feature
is turned off, the voice guidance can be
heard only if you push the
“MAP/
VOICE”
button.
To turn the “Auto Voice Guidance” mode
on:
1. Push the
“MENU” button.
2. Touch the “Setup” switch. Then
touch
switch to display page 2 of the
“Setup” screen.
3. Touch the “On” switch of “Auto
Voice Guidance”.
The selected switch is highlighted in
green.