2007 TOYOTA CAMRY HYBRID key

’07Camry hybrid_U (L/O 0610)
146
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
(j)
This message is to warn of the hybrid
battery condition.
The message appears in the following
conditions.:
The hybrid battery voltage drops be-
cause the transmission is left in the
“N” position.
If you put the transmission in the “P”
position and the message disappears,
the system is working properly.
The hybrid battery is discharged.
If the hybrid battery is discharged and
the message appears along with the
“READY” light turned on, stop your ve-
hicle in a safe place and contact your
Toyota dealer.
The message appears with the master
warning light and a warning tone sounds. (k)
This message is to warn the driver that
the transmission is not in the “P” posi-
tion when the driver’s door is opened.
Put the transmission in the “P” posi-
tion.
The message appears with the master
warning light and a warning tone sounds.
(l)
This message is to remind the driver
that the brake pedal is not depressed
when starting the hybrid system.
Depress the brake pedal firmly and press
the “POWER” switch. For the starting pro-
cedure, see “How to start the hybrid sys-
tem” on page 301 in Section 3.
If the brake pedal is not depressed, the
message appears and a warning tone
sounds when the hybrid system is started.(m)
This message is to warn the driver that
the transmission is not in the “P” posi-
tion when leaving the vehicle.
Put the transmission in the “P” posi-
tion.
The message appears with the master
warning light and a warning tone sounds.
(n)
When this message appears in the fol-
lowing cases, a warning tone sounds.
The key is not detected in the vehicle
because someone has taken the key
outside of the vehicle without turning
the hybrid system off. At this time, a
warning tone sounds. The above mes-
sage turns off if the “POWER” switch
is turned off or the key is in the ve-
hicle.
The key is not detected in the vehicle
when the “POWER” switch is pushed.
In this case, the above message ap-
pears for 8 seconds.

’07Camry hybrid_U (L/O 0610)
147
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
(o)
This message is to warn the driver that
the electronic key battery is low.
Change the key battery as soon as pos-
sible to ensure that the smart key sys-
tem operates properly.
The message appears with the master
warning light and a warning tone sounds.
(p)
This message warns the driver that the
steering lock function malfunctions. At
this time, the amber indicator light on
the “POWER” switch flashes.
The hybrid system will not be turned on
in this case. Contact your Toyota dealer
as soon as possible.
The message appears with the master
warning light and a warning tone sounds.(q)
This message appears when the steer-
ing lock is stuck. The message appears
for 15 seconds. At this time, the green
indicator light on the “POWER” switch
flashes.
To free the steering lock, rotate the steer-
ing wheel slightly left or right while press-
ing the “POWER” switch.
The message appears with the master
warning light and a warning tone sounds.
(r)This message is to remind the driver to
change the engine oil. The message is
a prior notice.
Toyota recommends that the engine oil
be changed as soon as possible.
If the driving range after the previous oil
change reaches 7200 km (4500 miles), the
message appears for about 15 seconds
with the master warning light and a warn-
ing tone sounds.
The engine oil maintenance data must be
reset after the engine oil change. See
following “Resetting the engine oil mainte-
nance data”.

’07Camry hybrid_U (L/O 0610)
160
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
When the key is in the vehicle, press-
ing the “POWER” switch (hybrid system
startup switch) allows you to start and
stop the hybrid system or choose at
the ACC, ON, or “POWER” switch off.
When the brake pedal is not depressed,
pressing the “POWER” switch changes the
mode as follows. Press the switch slowly
and firmly.First time—ACC (accessory) mode (
illu-
minates amber)
Accessories such as the radio operate.
Second time—ON mode (illuminates am-
ber)
All accessories on.
Third time—Power off (indicator light
off)
Pressing the “POWER” switch again re-
turns the mode switch to ACC.If a buzzer sounds and the master warn-
ing light comes on for 5 seconds when
pressing the “POWER” switch, this indi-
cates that the key is not in the vehicle.
The message “KEY IS NOT DETECTED”
will also appear on the multi −information
display.
If the brake pedal is depressed, the in-
dicator light will turn green, regardless
of which mode is selected. When the
indicator light is green, pressing the
“POWER” switch once turns the hybrid
system on. (For starting tips, see “How
to start the hybrid system” on page 301
in Section 3.)
“POWER” switch

’07Camry hybrid_U (L/O 0610)
210
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
Phone Setup (see page 216)
Pair phone
To use the hands−free system, you
need to register your phone in the sys-
tem.
Change name
The registered phone names can be
changed.
Delete
The registered phones can be deleted.
List phones
The registered phone names can be
checked.
Select phone
The registered phones can be selected.
Set passkey
The passkey can be c hanged.Security (see page 221)
Set PIN
The PIN can be set or changed.
Phone book lock
The phone book can be locked.
Phone book unlock
The locked phone book can be un-
locked.
System Setup (see page 225)
Adjust Guidance Volume
Guidance volume can be adjusted.
Initialize
Phone Book (see page 225)
Add Entry
Phone numbers and voice tags can be
registered.
Change Name
The registered names can be changed.
Delete Entry
The registered names can be deleted.
Delete Speed Dial
The registered speed dial can be de-
leted.
List names
The registered names can be checked.
Set Speed Dial
Speed dials can be set
Redial (see page 233)
Callback (see page 234)
Making a phone call (see page 235)
Receiving a phone call (see page 238)
Talking on the phone (see page 239)
Handsfree phone system—
—Reference

’07Camry hybrid_U (L/O 0610)
217
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
Set PassKey
The passkey can be c hanged. A 4 to 8
digit code can be input as a pa sskey.
Delete
The registered phones can be deleted.
To enter the phone setup menu 1. Push the off −hook switch to turn the
hands −free system on.
2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until
“Setup” is displayed and push the
knob.
“Setup. Please push the talk switch and
say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until
“Phone Setup” is displayed and push
the knob.
“Phone setup. Push the talk switch and
say pair phone, select phone, change
name, list phones, set pa sskey or delete.”
is heard.
“XXX (phone name) already selected.” is
heard and “XXX (phone name)” is dis-
played.
If no phone has been registered, the sys-
tem may not function properly. To pair phones
1. Push the talk switch and say “Pair phone”, or turn the “AUDIO CTRL”
knob until “Pair Phone” is displayed
and push the knob.
“Pair. Push the talk switch and say a
name for the phone.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re-
cord Name” is displayed, push the
knob and say “XXX (desired phone
name)”.
“Push the talk switch and say confirm.
Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until
“Confirm” is displayed and push the
knob.
“XXX Ready for phone pairing. Please use
the phone to connect it to the hands −free
system. The passkey for the p hone is....”
is heard.
After “HANDS FREE” is displayed, a pass-
key
∗ is displayed and “Searching.” is
heard. 4. Input the displayed pa
sskey into the
phone.
“The phone is paired and ready for use.
Returning to the main menu.” is heard and
“Paired” is displayed.
The system may not function in the follow-
ing cases:
If 6 phones have already been regis-
tered.
If the vehicle is moving.
If the system cannot communicate with
the phone.
∗: Passkey is a password r equired to reg-
ister a phone to the system.
INFORMATION
To use the handsfree system, you
need to register your phone in the
system. Once you have registered
it, you can make a handsfree call.
Up to 6 phones can be registered.
For the operation of the phone, see
the manual that comes with your
cellular phone.
The passkey can be changed. See
page 220 for changing the passkey.

’07Camry hybrid_U (L/O 0610)
220
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
Select phone
Push the talk switch and say “Select
phone”, or turn the “AUDIO CTRL” knob
until “Select Phone” is displayed and push
the knob.
For further details on selecting a phone,
see page 218.
Change name
Push the talk switch and say “Change
name”, or turn the “AUDIO CTRL” knob
until “Change Name” is displayed and
push the knob.
For further details on changing a name,
see page 218.
Delete
Push the talk switch and say “Delete”, or
turn the “AUDIO CTRL” knob until “Delete”
is displayed and push the knob.
For further details on deleting a phone,
see page 221.
If no phone has been registered, the sys-
tem may not function properly.To set a passkey
1. Push the talk switch and say “Set passkey”, or turn the “AUDIO CTRL”
knob until “Set PassKey” is displayed
and push the knob.
“Set Passkey. The passkey is r equired for
the phone pairing process. Push the talk
switch and say a new passkey.” is heard
and passkey is displayed.
2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob to select
a number.
When using a voice command:
“XXXX (new pa sskey) Push the talk switch
and say confirm. Otherwise, continue add-
ing numbers, or say go back or delete.”
is heard and “XXXX (new pa sskey)” is
displayed.
Follow voice guidance instructions, or turn
the “AUDIO CTRL” knob until “Confirm” is
displayed and push the knob.
“Passkey ch anged. Returning to the phone
setup.” is heard. When using the knob:
1. Turn the “AUDIO CTRL” knob to select a number. Push the “AUDIO CTRL”
knob to set.
2. When the passkey is set, push the “AUDIO CTRL” knob.
“Passkey c hanged. Returning to the phone
setup.” is heard.
The system may not function in the follow-
ing cases:
If the passkey has less than 4 digits.
If the passkey has more than 8 digits.

’07Camry hybrid_U (L/O 0610)
267
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
CAUTION
To reduce the chance of injury in
case of an accident or sudden stop
while driving, always completely close
the ashtray after use.
To use the glove box:
Open by pulling the lever.
Lock by inserting the mechanical key and
turning it clockwise.
Unlock by inserting the mechanical key
and turning it counterclockwise.
With the instrument panel lights on, the
glove box light will come on when the
glove box is open.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.
Glove box

’07Camry hybrid_U (L/O 0610)
300
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
STARTING AND DRIVING
Starting and driving
Preparing to start the hybrid system301
. . . . . . . . . . . . . . . . . . . . . . . . . .
How to start the hybrid system 301
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Driving and parking using smart key system 304
. . . . . . . . . . . . . . . . . . .
Tips for driving in various conditions 307
. . . . . . . . . . . . . . . . . . . . . . . . . .
Winter driving tips 309
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . .
Dinghy towing 310
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . .
Trailer towing 310
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . .
How to save fuel and make your vehicle last longer 311
. . . . . . . . . . . . .
SECTION 3