WW-70
< ON-VEHICLE REPAIR >
FRONT WIPER ARM
RHD Models
Removal and InstallationINFOID:0000000001449632
REMOVAL
1. Operate the front wiper to move it to the auto stop position.
2. Open the hood.
3. Remove the front wiper arm caps.
4. Remove the front wiper arm nuts.
5. Raise the front wiper arms, and remove the front wiper arms.
INSTALLATION
1. Clean up the pivot area as shown. This will reduce possibility of
wiper arm looseness.
2. Prior to wiper arm installation, turn on wiper switch to operate
wiper motor and then turn it off (auto stop).
3. Push wiper arm onto pivot shaft, make sure it is correctly
meshed and fully seated on the spline.
ALLIA0278ZZ
1. Wiper arm cap 2. Front RH wiper arm 3. Wiper arm cap
4. Front LH wiper arm 5. Front wiper drive assembly 6. Front LH wiper blade
7. Front RH wiper blade Front
SEL024J
