Page 297 of 723
296 Control systems
Voice Control address book
Opening address book
Press !.
Speak the command “Address book”.
Press !.
Speak one of the address book com-
mands described below.Operation with address book open
(local)
In addition to the capabilities listed when
the address book is not open, the address
book opened allows you to:
open an entry using the corresponding
voice entry
open any entry by spelling the name
Opening entry: Speak the command
“Open entry”.
Operating and using address book
Press !.
Speak one of the following commands
depending on the address book status
(open or not open).Available commands with the address
book not open
For a complete list of commands
(
page 305).
“Help address book”
Use the command “Help address book” to
have the Voice Control System read out an
option list of all available commands for
the address book.
“Save name” (
page 282)
“Dial name” (
page 283)
“Call ” (
page 283)
ProCarManuals.com
Page 298 of 723

297 Control systems
Voice Control address book
“Delete name” (Address book)
Use the command “Delete name” to delete
a voice name from your address book.
Sample dialog:
sDelete name
tPlease say the name
sJohn Smith
tDo you want to delete John Smith?
sYes
tThe voice name is deleted
“Navigate to ” (Address
book) (
page 290)“List address book”
Use the command “List address book” to
have the system read out all available ad-
dress book entries and, if desired, select
an entry when it is being read.
Sample dialog:
sList address book
The system reads out all available address
book entries.
Selecting address book entry: When
the system reads the desired entry,
press!.
The entry is selected and shown on the
COMAND display.
Canceling the dialog: PressL.
You have canceled the dialog. The sys-
tem reads out “Cancel”.“List phone book” and dialing a phone
number (
page 284)
“List destination memory” (
page 291)
“Delete address book”
Use the command “Delete address book”
to delete all or individual voice names of
the address book entries. Only the voice
name is deleted; the remaining data in the
entry are retained.
“Address book”
Use this command to open the address
book.
ProCarManuals.com
Page 299 of 723

298 Control systems
Voice Control address book
Available commands with the address
book open
“Help address book”
Use the command “Help address book” to
have the Voice Control System read out an
option list of all available commands for
the address book.
“Open ”
Use the command “Open ”
to open an entry in your address book that
has a voice name already assigned to it.
Sample dialog:
sOpen John Smith
uThe entry “John Smith” appears on
the COMAND display“Select entry”
Use the command “Select entry” to open
an entry in your address book.
Sample dialog:
sSelect entry
tPlease say the name
sJohn Smith
uThe entry “John Smith” appears on
the COMAND display.
“Spell entry”
Use the command “Spell entry” to open an
address book entry by spelling the name.
Speak the name as a continuous string
(five to seven characters).
The system will display a list of possible
matches on the COMAND display from
which you can select the desired entry.Sample dialog:
sSpell entry
tPlease spell the name
sS-M-I-T-H
uThe system displays a numbered
list of matching entries on the
COMAND display
tPlease select a line number
sNumber two
uThe system opens the entry associ-
ated with line number two on the
list
iYou can use the commands “Continue” or
“Back” to scroll up or down the next page. Use
the command “Correction” to exit the current
selection list and spell the name again.
ProCarManuals.com
Page 300 of 723

299 Control systems
Voice Control radio
Voice Control radio
Radio operation
The Voice Control System gives you the ca-
pability to:
Select a station
Seek a station
Select a specific frequency
Save up to 20 stations in your station
list
Select frequency band (FM or AM)
Select weatherband
Switch to satellite radio (USA only)
Delete station (from station list)
List the station list
Delete the station list
To operate the radio using the Voice Con-
trol System, the Voice Control System
must be activated (
page 276).
Selecting radio mode
Press!.
Speak the command “Radio”.
Press!.
Speak one of the radio commands.
The system switches to the last tuned
station in the selected band.
Radio commands
For a complete list of commands
(
page 305).
“Help Radio”
Use the commands
“FM”
“AM”
“Weatherband”
to select the desired frequency band or
switch the radio to the weatherband.
“Sat Radio” (USA only)
Use this command for switching on the
satellite radio.
Warning!G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
ProCarManuals.com
Page 301 of 723

300 Control systems
Voice Control radio
“Next station” or “Previous station”
The following commands are used to start
the station search and to tune in the next
station:
“Next station”
“Previous station”
Selecting frequency (FM, AM only)
You may, for example, select a frequency
in the FM band (87.9 to 107.9 Megahertz)
directly using a verbal command such as
“Ninety-five five”. The Voice Control Sys-
tem also recognizes the words “frequen-
cy”, “point” and “megahertz”. You may for
example use the command “Frequency
ninety-five point five”.
Sample dialog:
sNinety-five point five
The Voice Control System tunes the radio
to frequency FM 95.5.“Save station” (List saved stations)
Use this command to save the set station
(AM and FM only) by name in your personal
station list. After using this command, the
Voice Control System will prompt you to
repeat the name two to four times before it
is saved in the station list. When repeating
the station name, make sure that you pro-
nounce it in the same manner as during the
first input. Otherwise the name cannot be
saved and the Voice Control System can-
cels the save procedure.Sample dialog:
sSave station
tPlease say the station name
sSmooth Jazz
tPlease say the station name again
sSmooth Jazz
tThe station Smooth Jazz has been
saved
“Select station” (List saved stations)
Use the command “Select station” (AM
and FM only) to select a saved station
name from your station list.
Sample dialog:
sSelect station
tPlease say the station name
sSmooth Jazz
The Voice Control System tunes to the cor-
responding frequency.
iThe Voice Control System may recognize
names even if not saved in your voice. For opti-
mum performance, however, call up only names
you have saved yourself.
iYou can freely select the station name, for
example “Favorite station”.
ProCarManuals.com
Page 302 of 723

301 Control systems
Voice Control radio
“Station Smooth Jazz” (List saved sta-
tions)
Use this command (AM and FM only) to di-
rectly select a saved station name from
your station list.
Sample dialog:
sStation Smooth Jazz
The Voice Control System tunes to the cor-
responding station.“List station list” and select station
from list
Use this command to list the entire station
list, or to select an entry from the station
list.
Sample dialog:sList station list
The Voice Control System reads out the
entire list.
To select a station:
When the system reads the desired sta-
tion:
Press !.
Canceling the dialog: PressL.
The dialog is concluded. The system
confirms “Cancel”.“Delete station” (List saved stations)
Use the command “Delete station” (AM
and FM only) to delete a station from your
personal station list.
Sample dialog:
sDelete station
tWhich station do you want to de-
lete?
sSmooth Jazz
tDo you want to delete Smooth Jazz?
sYes
tStation deleted
iIf the Voice Control System does not recog-
nize the station name you requested, please re-
fer to the section “List station list” (
page 301).
By following the dialog, you can check and deter-
mine if the name is saved in the station list.
ProCarManuals.com
Page 303 of 723
302 Control systems
Voice Control radio
“Delete station list”
Use this command to delete the complete
station list or one or more stations from
the station list.
Sample dialog:
sDelete station list
tDo you want to delete all voice
names from the station list?
sYes
tAre you sure?
sYes
tAll voice names have been deleted
from the station listThe system deletes the complete station
list. The deletion of the station list cannot
be undone.
or
tNo
The system starts reading the station list.
When the system reads the station to be
deleted:
Press !.
The station to be deleted is selected.
The name of the selected station is
read out once more.
tDo you want to delete Smooth Jazz?
sYes
tStation deletedThe station is erased and the remaining
station entries are read out.
or
tNo
The system continues reading the station
list entry by entry.
ProCarManuals.com
Page 304 of 723

303 Control systems
Voice Control CD/DVD changer/MP3
Voice Control CD/DVD changer/MP3
Operation
The Voice Control System gives you the
ability to:
Select a CD/DVD/medium
Select a track
Select a folder in MP3 mode
Select a group in audio-DVD mode
To operate the DVD changer using the
Voice Control System, the Voice Control
System must be activated (
page 276).Selecting CD mode
Press !.
Speak one of the following commands:
“CD”
“DVD”
“MP3”
Press !.
Speak one of the following commands.
Warning!G
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the audio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
iThe following commands “Next/Previous
CD/DVD” and “CD/DVD 1” to “CD/DVD 6”,
cause the DVD changer to switch from one slot
to another, regardless of the type of medium
found in the selected slot. In your command, you
can therefore replace the term “CD/DVD” with
“Medium”.
ProCarManuals.com