2007 ISUZU KB P190 brake

5B-16 ANTI-LOCK BRAKE SYSTEM
Rear Sensor Rotor
Rear Sensor Rotor and Associated Parts




RTW 55BLF000101

Legend
(1) Axle Shaft Assembly with Brake
(2) Sensor Rotor


(3) Front
Removal
1. Remove the axle shaft assembly with brake. (Refer
to the section Rear Axle)


BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

ANTI-LOCK BRAKE SYSTEM 5B-17



RUW 55BMF000101

Legend
(1) Bench Press Fitting
(2) Axle Shaft


(3) Sensor Rotor
Inspection and Repair
Make all necessary adjustments, repairs or part
replacement.
• Check damage or powdered iron sticking to the
sensor rotor.
• Check play in the sensor rotor.
• Check a broken tooth or indentation in the senso
r
rotor.
NOTE: If replacement is required, remove the
sensor rotor from the axle shaft assembly with
brake. (Refer to the section Rear Axle).
• Discard the used sensor rotor.
(Snap ring, Oil seal and Bearing)
Installation
1. Install the sensor rotor and assemble it into the
axle shaft assembly with back plate, using setting
tool 9-8522-1271-0. (Refer to the section Rea
r
Axle)

BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

5B-18 ANTI-LOCK BRAKE SYSTEM

420R300005
Legend
(1) Axle Shaft
(2) Oil Seal
(3) Bolt


(4) Back Plate
(5) Sensor Rotor
(6) Double Taper Roller Bearing
2. Install the axle shaft assembly with brake in the rear axle. (Refer to the section Rear Axle).

BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

ANTI-LOCK BRAKE SYSTEM 5B-19
G-Sensor
G-Sensor and Associated Parts


This illustration is based on the RHD model
RTW 75BLF000101
Legend
(1) G-Sensor


(2) Nut
Removal
1. Remove the front floor console. (Refer to the section Floor Console)
2. Disconnect the connector.
3. Remove the nuts.
4. Take out the G-sensor.

Installation
1. Set the G-sensor.
2. Install the nut and tighten it to specified torque.
Torque: 8 N·m (0.8 kgf·m / 69 lb·in)
3. Connect the connector.
4. Install the front floor console. (Refer to the section Floor Console)



BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

5B-20 ANTI-LOCK BRAKE SYSTEM
Special Tools

ILLUSTRATION PART NO.
PART NAME
ILLUSTRATION PART NO.
PART NAME
5-8840-2789-0
Installer 9-8522-1271-0
(J-8609-01)
Setting Tool
5-8840-0007-0
(J-8092)
Grip

5-8840-2831-0

Bearing Remover


BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

BRAKES 5C-1
SECTION 5C
BRAKES
TABLE OF CONTENTS
PAGE
General Description ........................................................................................................ 5C- 2
Main Data and Specifications ......................................................................................... 5C- 9
Torque Specifications ..................................................................................................... 5C-1 0
Servicing ...................................................................................................................... .... 5C-19
Front Disc Brake Assembly ............................................................................................ 5C-33 Removal and Installation............................................................................................ 5C-33
Removal and installation of Disc Pad ....................................................................... 5C-37
Disassembly ................................................................................................................ 5C- 39
Inspection and Repair ................................................................................................ 5C-40
Reassembly ................................................................................................................. 5C- 42
Rear Drum Brake Assembly ........................................................................................... 5C-45 Disassembly ................................................................................................................ 5C- 45
Inspection and Repair ................................................................................................ 5C-46
Reassembly ................................................................................................................. 5C- 48
Brake Control.................................................................................................................. . 5C-52
Removal and Installation............................................................................................ 5C-52
Master Cylinder................................................................................................................ 5C-53
Removal and Installation............................................................................................ 5C-53
Disassembly ................................................................................................................ 5C- 54
Inspection and Repair ................................................................................................ 5C-56
Reassembly ................................................................................................................. 5C- 57
Vacuum Booster .............................................................................................................. 5C -60
Removal and Installation............................................................................................ 5C-60
Disassembly ................................................................................................................ 5C- 63
Reassembly ................................................................................................................. 5C- 64
Special Tools ................................................................................................................. . 5C-70

BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

5C-2 BRAKES
GENERAL DESCRIPTION
FRONT DISC BRAKE


REAR DRUM BRAKE



BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007

BRAKES 5C-3
REAR WHEEL CYLINDER



LOAD SENSING PROPORTIONING VALVE (LSPV)
RTW 35CMF000101

BACK TO CHAPTER INDEX
TO MODEL INDEX
ISUZU KB P190 2007