Page 12 of 2000
ENGINE - 2AZ-FE ENGINE
01NEG34Y
Oil Jets
Check
Va l v e
Oil
Bottom Side View Oil Jet Cross SectionEG-15
Oil Capacity
Liters (US qts, Imp. qts)
Dry
5.0 (5.3, 4.4)
with Oil Filter4.3 (4.5, 3.8)
without Oil Filter4.1 (3.8, 3.1)
2. Oil Jet
Piston oil jets for cooling and lubricating the pistons are used in the cylinder block.
These oil jets contain a check valve to prevent oil from being fed when the oil pressure is low. This prevents
the overall oil pressure in the engine from dropping.
Page 80 of 2000
ENGINE - 2GR-FE ENGINE
285EG23
Oil Pump
Oil FilterOil Strainer EG-84
LUBRICATION SYSTEM
1. General
The lubrication circuit is fully pressurized and all oil passes through an oil filter.
A cycloid rotor type oil pump is used.
Oil Capacity
Dry6.5 Liters (6.9 US pts, 5.7 Imp. qts)
With Oil Filter6.1 Liters (6.4 US pts, 5.4 Imp. qts)
Without Oil Filter5.7 Liters (6.0 US pts, 5.0 Imp. qts)
Page 303 of 2000
PREPARATION – 2AZ-FE LUBRICATIONPP–25
PP
LUBRICANT
Item Condition Capacity Classification
Oil grade - - Use API grade SL "Energy-
Conserving" or ILSAC multigrade
engine oil. SAE 5W-20 and SAE
0W-20 engine oil may be used.
However, SAE0W-20 is the best
choice for good fuel economy and
good starting in cold weather.
Drain and refill with oil filter change 4.3 liters (4.5 US qts, 3.8 Imp.
qts)-
without oil filter change 4.1 liters (4.3 US qts, 3.6 Imp.
qts)-
Dry fill Dry fill 5.0 liters (5.3 US qts, 4.4 Imp.
qts)-
Page 306 of 2000
PP–26PREPARATION – 2GR-FE LUBRICATION
PP
LUBRICANT
Item Capacity Classification
Oil grade - ILSAC multigrade engine oil is
recommended. SAE 5W-30 is the
best choice for good fuel
economy and good starting in
cold weather.
Drain and refill With oil filter change 6.1 liters ( 6.4 US qts, 5.4 Imp.
qts)-
Without oil filter change 5.7 liters ( 6.0 US qts, 5.0 Imp.
qts)-
Dry fill 6.5 liters ( 6.9 US qts, 5.7 Imp.
qts)-