2AZ-FE ENGINE CONTROL SYSTEM – ECMES–431
ES
2. INSTALL AIR CLEANER CASE
(a) Install the air cleaner case with the 3 bolts.
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
(b) Connect the harness clamp.
3. INSTALL AIR CLEANER CAP (See page ES-413)
4. CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
5. PERFORM REGISTRATION
(a) When replacing the ECM, the Vehicle Identification
Number (VIN) must be input into the replacement
ECM (see page ES-13).
(b) When replacing the ECM, perform the vehicle
stability control system recognition in the ECM (see
page CC-12).
6. RESET MEMORY
(a) When replacing the ECM, perform the RESET
MEMORY procedure (A/T initialization) (see page
AX-18).
A124563
2GR-FE ENGINE CONTROL SYSTEM – ECMES–471
ES
INSTALLATION
1. INSTALL ECM
(a) Install the 2 brackets to the ECM with the 4 screws.
Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf)
(b) Connect the 2 ECM connectors.
NOTICE:
When connecting the connector, make sure that
dirt, water and other foreign matter does not
become stuck between the connector and other
part.
(1) Connect the 2 ECM connectors and lower the 2
levers.
NOTICE:
Make sure that the 2 levers are securely
lowered.
(c) Install the ECM with the 3 bolts.
Torque: 6.5 N*m (66 kgf*cm, 57 in.*lbf)
2. INSTALL AIR CLEANER CASE (See page EM-39)
3. INSTALL AIR CLEANER CAP (See page EM-39)
4. CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
5. PERFORM REGISTRATION
(a) When replacing the ECM, the Vehicle Identification
Number (VIN) must be input into the replacement
the new ECM (see page ES-14).
(b) When replacing the ECM, perform the vehicle
stability control system recognition in the ECM (see
page CC-12).
6. RESET MEMORY
(a) 2WD:
When replacing the ECM, perform the RESET
MEMORY procedure (A/T initialization) (see page
AX-20).
(b) 4WD:
When replacing the ECM, perform the RESET
MEMORY procedure (A/T initialization) (see page
AX-20).
A124573
A124572
A124570
