Page 363 of 400
undefined
8710-08
RKSTICS
Opening Driver's or Passenger's Door
Key hole illumination
Wiring Circuit of STICS (Related to Tail Lamp Auto Cut (Battery Saver))
Page 364 of 400
RKSTICS
undefined
8710-08
Tail Lamp Auto Cut (Battery Saver)
The tail lamp is turned on or off according to the operations of the tail lamp switch.
The tail lamp relay is turned off (auto cut) when opening and closing the driver's door afte
r
removing the ignition key without turning off the tail lamp.
The tail lamp relay is turned on when inserting the ignition key into the ignition switch.
The tail lamp relay is not turned off automatically (auto cut) when opening and closing the
driver's door while the ignition is removed and the tail lamp is turned on. 1.
2.
3.
4.
Page 368 of 400

RKSTICS
undefined
8710-08
Door Lock/Unlock Control by Door Lock Switch
The door lock system outputs "LOCK" signal for 0.5 seconds when positioning the driver's
or passenger's door lock switch to the lock position.
The door lock system outputs "UNLOCK" signal for 0.5 seconds when positioning the
driver's or passenger's door lock switch to the unlock position.
The door lock system outputs "LOCK" signal for 0.5 seconds when switching from LOCK to
UNLOCK by the driver's or passenger's door key cylinder.
The door lock system outputs "UNLOCK" signal for 0.5 seconds when switching from
UNLOCK to LOCK by the driver's or passenger's door key cylinder.
The alarm will not be activated when switched to UNLOCK by driver's or passenger's doo
r
key cylinder switch in theft deterrent mode.
It does not occur abnormal operation when reconnecting the battery after disconnecting the
battery cable.
All door lock signals are "UNLOCK" for 0.5 seconds just for once when receiving the
"LOCK" signal within 0.5 seconds after closing the driver's or passenger's door while the
ignition key is removed. 1.
2.
3.
4.
5.
6.
7.
Page 377 of 400
undefined
8710-08
RKSTICS
7. Operations when removing and installing the battery
If the system is in armed mode while installing a battery, the siren sounds and the emergency
warning lamp blinks.
(Same operations with warning in armed mode).
RELOCK Operation: It the door is not opened or the ignition key is not inserted into the
key cylinder within 30 seconds after unlocking the door with remote control key, the
system outputs "LOCK" signal and activates the armed mode. -