RKSTICS
undefined
8710-08
OVERVIEW AND OPERATION PROCESS
1. OVERVIEW
The RKSTICS (REKES + STICS (Super Time & Integrated Control System)) communicates
with the transmitter (remote controller) and other electronic systems to transmit and receive the
data.
The STICS also includes a diagnosis function that can inspect the error for related devices.
2. MAJOR CHANGES
Integration of Auto Light Sensor and Rain Sensor
The auto light sensor integrated rain sensor communicates with STICS.
Auto Washer Coupled Wiper
When pressing the auto washer switch, the washer fluid is sprayed on the windshield and the
wiper sweeps off 4 times, and then the washer fluid is sprayed and the wiper sweeps off 3
times again.
Communication with SPWM
The communication with SPWM is added due to the introduction of easy access function to
SPWM.
undefined
8710-08
RKSTICS
Auto Door Lock
The door lock system outputs "LOCK" when the vehicle speed maintains over 50 km/h.
However, it doesn't output "LOCK" when all doors are locked or failed.
If any of doors is unlocked after outputting "LOCK" in step 1, outputs "LOCK" up to 5 times
(except step 1) at the interval of one second.
If any of doors is unlocked after 5 times of "LOCK" outputs, the door is regarded as "FAIL".
If the door that was regarded as fail changes (UNLOCK to LOCK) to unlock, only one
"LOCK" output will be done.
If any door is regarded as FAIL, the auto door lock function does not work (if it is occurred
when the vehicle speed is over 50 km/h, the auto door lock output does not occur even i
f
the vehicle speed falls below 50 km/h and accelerates again to over 50 km/h.).
Nonetheless, the central door lock function works properly.
When the system receives "UNLOCK" signal from a door switch, it outputs "LOCK" signals 5
times. If additional "LOCK" signal from another door switch is detected during the period, the
system outputs five "LOCK" signals
5 times for the door system outputs five "LOCK" signals 5 times for the door.
The door lock system outputs "UNLOCK" automatically if the "LOCK" output conditions are
established by this function or the key is cycled (IGN1=OFF) (even when there is no "LOCK"
output while the vehicle speed maintains over 50 km/h under lock condition).
(If the LOCK condition is established with the ignition switch ON, the system outputs
UNLOCK signal unconditionally when turning the ignition switch to OFF position.)
However, when the ignition key is turned to "OFF" position, the lock output conditions will be
cancelled.
The "FAIL" condition of the door will be erased when the ignition key is turned to "OFF"
position. 1.
2.
3.
4.
5.
6.
7.
8.
