2006 MITSUBISHI COLT wheel

GENERAL INFORMATION
FRONT AXLE26-2
GENERAL INFORMATION
M2260000100701
The front axle consists of front hub, wheel bearing,
knuckles and driveshafts, and has the following fea
-
tures:
•The wheel bearing incorporates magnetic
encoder for wheel speed sensing.
•The driveshaft incorporates EBJ-TJ type constant
velocity joint <4A9-CVT, 4A9-M/T (LS)>,
EBJ-ETJ type constant velocity joint <4A9-M/T
(VR)>, BJ-TJ type constant velocity joint <4G1>.
•The dynamic damper is mounted to reduce differ-
ential gear noise.
•The bracket assembly is mounted to reduce
torque steer. < 4G1>
•For environmental protection, a lead-free grease
is used on the joints.
EBJ(Eight Ball Fixed Joint):The use of the
smaller-sized eight balls inside the joint achieves
weight saving and compact size compared with a
BJ(Birfield Joint).
ETJ(Eco type Tripod Joint):This joint achieves
weight saving and compact size compared with a
TJ(Tripod Joint).
BJ:Birfield Joint
TJ:Tripod Joint
SPECIFICATIONS
Item4A94G1
CVTM/T
LSVR
Wheel bearingTy p eDouble-row angular contact ball bearing
Bearing (OD x ID) mm76 × 4076 × 4076 × 4076 × 40
DriveshaftJoint typeOuterEBJEBJEBJBJ
InnerTJTJETJTJ
Length (joint to joint)
× diameter mm
LH377 × 21.2377 × 21.2379 × 23352 × 24.9
RH688 × 21.2688 × 21.2664.3 × 23378.2 × 24.9

GENERAL INFORMATION
FRONT AXLE26-3
CONSTRUCTION DIAGRAM
AC402000AG
<4A9>EBJ TJ (RH)
ETJ (RH)
Driveshaft (LH) TJ (LH)
ETJ (LH)
Dynamic damper
Driveshaft (RH)
Front hub KnuckleStrut assembly
Wheel bearing Dynamic damper
AC403318
AC511705AC
<4G1>
Front hub Knuckle
Strut assembly
BJDriveshaft (LH)
TJ
Wheel bearing Driveshaft (RH)
Bracket assembly
TJ
Dynamic damper

GENERAL INFORMATION
FRONT SUSPENSION33-4
SPECIFICATIONS
SUSPENSION SYSTEM
ItemSpecification
Suspension typeMacPherson strut with coil spring
WHEEL ALIGNMENT
ItemSpecification
Camber − 0 °30'
Caster 4A92°35'
4G12°40'
Kingpin inclination 13°20'
Toe-inAt the centre of tyre tread mm0
Toe-angle (per wheel)0°
COIL SPRING
<4A9>
ItemSpecification
Wire diameter mm12
Average outside diameter mm133 − 149 − 154
Free length mmCVT331
5MT301
<4G1>
ItemSpecification
Wire diameter mm13
Average outside diameter mm133 − 150 − 154
Free length mm300

GROUP 31
WHEEL AND TYRE
CONTENTS
GENERAL INFORMATION . . . . . . . .31-2

GENERAL INFORMATION
WHEEL AND TYRE31-2
GENERAL INFORMATION
M2310000100800
The wheels and tyres of the following specifications
have been established.
SPECIFICATIONS
ROAD WHEEL AND TYRE
ItemLSVR, VR-XRALLIART
WheelTy p eSteel typeAluminium typeAluminium type
Size14 × 5.5JJ15 × 6JJ16 × 6.5JJ
Amount of wheel offset
mm464643
PCD mm100100114.3
Ty r eSize175/65R14 82S185/55R15 81V205/45R16 83W
NOTE: PCD indicates the pitch circle diameter of the wheel installation holes.
SPARE WHEEL AND TYRE
ItemLS, VRVR-XRALLIART
Spare
wheelTy p eSteel typeSteel typeSteel type
Size14 × 4T15 × 4T15 × 3.5B
Amount of wheel offset
mm384640
PCD mm10010011 4 . 3
Spare tyreSizeT115/70D14 88MT125/70D15 95MT125/70D15 95M
NOTE: PCD indicates the pitch circle diameter of the wheel installation holes.

GROUP 37
POWER STEERING
CONTENTS
GENERAL INFORMATION . . . . . . . .37-2
CONSTRUCTION DESCRIPTION . . .37-5
STEERING WHEEL . . . . . . . . . . . . . . . . . . 37-5
STEERING SHAFT AND COLUMN . . . . . . 37-5
ELECTRICAL POWER STEERING . .37-7
GENERAL INFORMATION . . . . . . . . . . . . . 37-7
STEERING GEAR . . . . . . . . . . . . . . . . . . . . 37-9
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-9
ELECTRIC POWER STEERING-ECU . . . . 37-10
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 37-11

GENERAL INFORMATION
POWER STEERING37-2
GENERAL INFORMATION
M2370000100851
Electric power steering system has been adopted for
all models in order to ensure an optimised steering
feeling.
FEATURES
•Improved fuel consumption by reduction of
engine load, and weight saving by decrease of
the number of parts have been achieved with the
introduction of the electric power steering system.
•3-spoke type steering wheel integrated with an
SRS airbag has been adopted.
•Impact-absorbing mechanism and tilt steering
mechanism have been adopted.
SPECIFICATIONS
ItemSpecifications
Vehicles with
14-inch wheelsVehicles with
15-inch wheelsVehicles with
16-inch wheels
Steering wheelTy p e3-spoke type
Outside diameter mm370
Maximum number of turns3.43.22.6
Steering columnColumn mechanismShock absorbing mechanism and tilt steering
mechanism
Power steering typeElectric powered type
Steering gearTy p eRack and pinion
Stroke ratio (Rack
stroke/Steering wheel
maximum turning radius)44.1550.46
Rack stroke mm150143130
Steering angleInner wheel41 ° 40’39 ° 00’34 ° 10’
Outer wheel35 ° 30’33 ° 40’30 ° 00’

GENERAL INFORMATION
POWER STEERING37-3
CONSTRUCTION DIAGRAM
AC405883AB
Steering wheel
Steering column assembly
Selector lever assembly
Electric power
steering-ECU
Motor
Torque sensor
Tie-rod end Steering gearDash panel cover