2006 MITSUBISHI COLT high beam

GENERAL INFORMATION
BODY42-2
GENERAL INFORMATION
M2420000100842
FEATURES
WEIGHT REDUCTION AND HIGH RIGID-
ITY
•Application ranges of high tension steel plate,
antirust steel plate, and uneven thickness steel
plate have been expanded.
•The upper frame outer and front pillar connection
has been strengthened by adopting the upper
frame-to-front pillar brace.
•The radius of each opening corner for the doors
and tailgate has been enlarged.
•Cowl top lower panel and spring house panel are
directly joined for higher rigidity.
•Strut tower bar has been adopted <4G1>.
•A front suspension axle side plate has been
adopted <4G1>.
•The air outlet garnish has been installed to the
hood, improving the sporty image and cooling
efficiency in the engine compartment. <4G1>
REDUCTION OF VIBRATION, NOISE, AND
AERODYNAMIC NOISE
•Straight frame structure has been adopted.
•Curved front floor and uneven thickness steel
plate have been adopted.
•Rigidity of the suspension installation part has
been improved.
IMPROVEMENTS IN SAFETY
•RISE (Reinforced Impact Safety Evolution) has
been used for the main body.
•Features a side door beam to boost safety upon
side impact.
•Direct combination key cylinder and inside lock
cables for the front doors have been adopted to
improve safety upon impact.
IMPROVEMENTS IN OPERATION
QUALITY
•The central door locking system, which
locks/unlocks all the doors and the tailgate, is
adopted.
•"P" position shift linked door-unlock function has
been introduced to the central door locking sys
-
tem(F1C1A).
IMPROVEMENTS OF PRODUCT
PACKAGE AND APPEARANCE
•Rigidity of door sash bottom section has been
improved.
•By improving the engaging sound between the
door latch and striker, the door locking sound
quality has been enhanced.
•UV & heat protect glass has been used for the
windshield.
•UV-reducing glass has been used for the front
door window glasses and rear door window
glasses.
•Privacy glasses have been used for rear door
window glasses, quarter window glasses, and
tailgate window glass (Option).
•Multi-mode keyless entry system (with door mir-
ror retraction/return control function) has been
adopted.
•Protector film has been attached on side sill
.
•Sunroof has been installed (Option).

LIGHTING
CHASSIS ELECTRICAL54A-7
LIGHTING
M2540004000932
EXTERIOR LAMPS
•The headlamp employs a large four-lamp type
integrated with the front turn-signal lamp and
position lamp, creating the integrity appearance
with the hood. The internal lens design looks like
a precision machine, achieving improved appear
-
ance.
•The fog lamp is standard equipped. (VRX, VR
and RALLIART version-R : Standard equipment,
LS : Option)
•The rear combination lamps are a large verti-
cal-type integrated with the tail lamp, stop lamp,
rear turn-signal lamp and back-up lamp.
•The high-mounted stop lamp is equipped as
standard in order to improve safety.
Specifications
ItemSpecification
Headlamp assemblyHeadlamp (halogen bulb)Low-beam W55 (H7)
High-beam W55 (H1)
Position lamp W5 (W5W)
Front turn-signal lamp W21 (W21W)
Fog lamp W55 (H11)
Side turn-signal lamp W5 (WY5W)
Rear combination lamp
assemblyTa i l l a m p W5 (W5W)
Stop lamp W21 (W21W)
Rear turn-signal lamp W21 (W21W)
Back-up lamp W21 (W21W)
High-mounted stop lamp W x units5 × 4 (W5W)
Licence plate lamp W5 (W5W)
NOTE: The brackets ( ) show the bulb type.

LIGHTING
CHASSIS ELECTRICAL54A-8
CONSTRUCTION DIAGRAM
AC405170
Headlamp (high-beam)
Front turn-signal lamp
Position lamp Side turn-signal lamp
Headlamp assembly
AC
Headlamp (low-beam)
Fog lamp
AC510138AC
High-mounted stop lamp
Licence plate lamp Stop lamp
Reflector
Rear turn-signal
lamp
Back-up lamp Tail lamp
Rear combination lamp
assembly

CIGARETTE LIGHTER
CHASSIS ELECTRICAL54A-13
DIAGNOSIS CODE TABLE
Code No.Diagnostic item
U1073Bus Off
U1100Engine-ECU or engine-CVT-ECU time-out (related to
engine)
U1101Engine-CVT-ECU time-out (related to CVT)
U1102ABS-ECU or ASC-ECU time-out
U1106EPS-ECU time-out
U1109ETACS-ECU time-out
U1120Failure information on engine-ECU or engine-CVT-ECU
(related to engine)
U1206Flag invalid
CIGARETTE LIGHTER
M2540003300060
The cigarette lighter is installed to the centre lower
panel.
AC600730
Cigarette lighter Cigarette lighter


AC
Commun ication st andb y signalETACS-E C U
Driver's door "open" sign als
Ignition switch (ACC) signa l
Ignition switch (IG1 ) sig nal
High-beam indicator re quest signal
Tu rn-signal indicato r reque st signa l
Fog lamp indicator request signal
Illumination sig nal
All doors "Open" sign al
Signal T r a nsmitter ECU

TECHNICAL FEATURES
GENERAL00-14
SUSPENSION
M2000023000460
AC405092AB

Lower arm
Front axle No.1
crossmember Stabilizer bar
Coil spring
Strut assembly
Front axle No.1
crossmember
Lower arm Strut assembly
Coil spring
Stabilizer bar
Shock absorber Coil spring
Torsion beam
and arm assembly
<4A9> <4G1>
•The
MacPherso n Strut suspe nsio n with comp ati-
ble characteristics of high rig idity and lig ht weight
has bee n adopted for the fron t suspension to
realise suf ficien t driving comfort.
•H-shaped to rsion bea m type suspe nsion has
bee n int roduced for t he rear suspension. This
suspe nsion has larg e suspen sion stro ke and pro
-
vides suf ficient driving comfort. With it s comp act
design , spe cio us interior sp ace has been
reserved.

MULTI-DISTRIBUTION INPUT/OUTPUT BY CIRCUIT
SMART WIRING SYSTEM (SWS)54B-6
Rear wiper washer
•Rear wiper•
AC207065
ETACS-ECU
AB
Circuit and Input Switch
ECUs and Switches
Connected by
Multi-Distribution
Output
• Ignition switch (IG1)
• Ignition switch (ACC)
Engine-CVT-ECU
• Inhibitor switch
Combination meter
•
Ignition switch (IG1) Column switch
(Rear wiper and
washer switch)
• Rear wiper motor
• Rear washer motor
: SWS communication line
: CAN communication line
Rear washer
Lighting
•Headlamp , t a il lamp•
AC401132AC
• Ignition switch (IG1)
• Fog lamp switch
• Driver's door switch
Combination meter
• High beam indicator lamp
• Fog lamp indicator lamp
•
Illumination lamps
• Headlamp
• Tail lamps
• Fog lamps
Combination meter
• Ignition switch (IG1) ETACS-ECU
Circuit and Input SwitchECUs and Switches
Connected by
Multi-Distribution
Output
Column switch
(Lighting switch)
: SWS communication line
: CAN communication line
Fog lamp

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-11
ECU FUNCTIONS AND CONTROLS IN THE SWS
M2541004000805
Following functions are controlled by ECUs of SWS.
FunctionControl ECUFunction
description
BuzzerLamp reminder buzzer functionETACS-ECU, Column switchP.54B-12
Door-ajar warning buzzer functionETACS-ECUP.54B-12
Turn-signal lamp operation sound
functionETACS-ECU, Column switchP.54B-13
Central door
locking systemCentral door locking control functionETACS-ECUP.54B-13
Shift "P" position linked door unlock
function P.54B-13
Power windowPower window timer functionETACS-ECUP.54B-14
Keyless entry
systemMulti-mode keyless entry system ETACS-ECUP.54B-14
Keyless entry hazard answerback
functionETACS-ECUP.54B-14
Keyless entry room lamp answerback
functionETACS-ECUP.54B-15
Windshield
wiper and
washerIntermittent control speed-dependent variable type>ETACS-ECU, Column switchP.54B-16
Mist wiper controlP.54B-16
Low speed wiper and high speed wiper
controlP.54B-17
Windshield wiper linked with washer
functionP.54B-18
Rear wiper and
washerRear wiper controlETACS-ECU, Column switchP.54B-19
Rear wiper linked with washer functionP.54B-20
Electric
retractable
remote
controlled
mirrorElectric retractable remote controlled
mirror timer functionETACS-ECUP.54B-20
Automatic unfolding functionP.54B-21
Flasher timer
functionTurn-signal lampETACS-ECU, Column switchP.54B-21
Hazard lampP.54B-22
Turn-signal lamp indicatorP.54B-22
HeadlampHigh-beam indicatorETACS-ECU, Column switchP.54B-22
Fog lampFog lamp controlETACS-ECU, Column switchP.54B-22
Fog lamp indicatorP.54B-22

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-22
HAZARD LAMP
AC101509
ON
OFF
ON
OFF
ON
OFF
Hazard lamp
switch
Turn signal
lamp output
RH
Turn signal
lamp output
LH
AC
When th
e hazard lamp switch inp u t signal turning
from OFF
to ON is dete c te d, the fla s h i ng st a t es tu rns
over b
y the signal (When th e hazard lamp is n o t
blin
kin g , it b lin ks. If it is b linking , it tu rns o f f).
NOTE: .
1.The push -return switch is adop ted for t he hazard
la mp switch .
2. Even if th e lamp bulb has burn ed o u t, the fla s hing
sp eed o f the ha zard lamp is not chang ed.
TURN-SIGNAL LAMP INDICAT O R
The ETACS-ECU sen d s th e turn sign al lamp indica-
tor ON sig nal to the combin ation mete r throu gh CAN
communicat
i on in synchronization with the turn sig
-
nal lamp operat ion. T he co mbination me ter receives
the tran
smitted sig nal a nd turns ON o r OFF the
turn-signal lamp indicator
.
HEADLAMP
HIGH-BEAM INDICA T O R
The ETACS-ECU sends th e high be am in dica tor ON
sig
nal to the comb ination meter th rough CAN co m
-
munication in synchr onizatio n with t he high bea m
headlamp
operation. T he co mbinatio n me ter
receives the
transmit t ed signa l and turns ON o r OF F
the high be
am indicator .
FOG LAMP
FOG LAMP CONTROL
AC401793AB
OFFON
(Extinguished) OFF (Illuminated) ON
(Extinguished) OFF (Illuminated) ON Tail lamp
Headlamp
OFF
Fog lamp switch Lighting switch
Headlamp
Tail lamp
(Extinguished) OFF(Illuminated) ON
Fog lamp output
When th e fog lamp switch is turn ed to ON with th e
t
a il lamp o r the h eadla m p lit (th e t a il lamp switch or
the hea
dlamp switch is ON), the fog lamp relay turns
ON, and
the fo g lamp s turn on.
If the ta il la mp or the he adlamp is turn ed of f with th e
ligh
t ing switch OF F while the fo g lamp s lit, the fog
lamp
s turn o f f the same time to prevent una ttende d
operation.
FOG LAMP INDICAT O R
The ETACS-ECU sen d s th e fog lamp indicat o r ON
sig
nal to the comb ination meter th rough CAN co m
-
munication in synchr onizatio n with t he fog lamp
operation.
The comb ination meter receives the trans
-
mitted signal and t u rns ON or OFF the fog lamp indi-
cator.