2006 INFINITI QX56 wiper fluid

WW-30
FRONT WIPER AND WASHER SYSTEM
Revision: November 20092006 QX56
Washer Tube Layout EKS00BE7
Wiper and Washer Switch EKS00BE8
REMOVAL AND INSTALLATION
Removal
1. Remove steering column covers.
2. Remove wiper washer switch connector.
3. Pinch tabs at wiper and washer switch base and slide switch
away from steering column to remove.
INSTALLATION
Installation is in the reverse order of removal.
Washer Fluid Reservoir EKS00GBI
REMOVAL AND INSTALLATION
Removal
1. Remove side washer fluid reservoir screw.
2. Remove front and rear washer motor connector.
WKIA4465E
1. Rear washer nozzle 2. Washer nozzles 3. Washer fluid reservoir
WKIA0071E
LKIA0411E

FRONT WIPER AND WASHER SYSTEMWW-31
C
DE
F
G H
I
J
L
M A
B
WW
Revision: November 2009 2006 QX56
3. Remove washer fluid level sensor connector.
4. Disconnect front and rear washer hoses.
5. Remove front washer fluid reservoir screw (2).
6. Remove washer fluid reservoir from the vehicle (1).
Installation
CAUTION:
After installation, add water up to the upper level of the washer fluid reservoir inlet and check for water
leaks.
Installation is in the reverse order of removal.
Washer Motor EKS00BEA
REMOVAL AND INSTALLATION
Removal
1. Remove washer fluid reservoir. Refer to WW-30, "Washer Fluid Reservoir" .
2. Remove washer motor (1) in the direction of the arrow as shown, and remove from washer fluid reservoir (2).
INSTALLATION
CAUTION:
When installing front and rear washer motor, there should be no packing twists, etc.
Installation is in the reverse order of removal.
LKIA0412E
WKIA4563E
WKIA4564E

WW-50
REAR WIPER AND WASHER SYSTEM
Revision: November 20092006 QX56
Rear Wiper Motor EKS00BEO
REMOVAL AND INSTALLATION
REMOVAL
1. Remove wiper arm. Refer to WW-49, "Rear Wiper Arm" .
2. Remove pivot cap.
3. Remove back door lock assembly. Refer to BL-136, "
Door Lock Assembly" .
4. Disconnect rear wiper motor connector.
5. Remove rear wiper motor bolts, and remove rear wiper motor.
INSTALLATION
CAUTION:

Do not drop the wiper motor or cause it to contact other parts.
1. Install rear wiper motor to the vehicle.
2. Connect rear wiper motor connector.
3. Install back door lock assembly. Refer to BL-135, "
BACK DOOR LOCK" .
4. Install pivot cap.
5. Install wiper arm. Refer to WW-49, "
Rear Wiper Arm" .
Rear Washer Nozzle AdjustmentEKS00BEP

This vehicle is equipped with a non-adjustable rear washer nozzle.

If not satisfied with washer fluid spray coverage, confirm that the washer nozzle is installed correctly.

If the washer nozzle is installed correctly, and the washer fluid spray coverage is not satisfactory, replace
the washer nozzle.
WKIA4567E
1. Wiper arm cover 2. Wiper arm and blade 3. Pivot cap
4. Rear wiper motor 5. Wiper arm stop 6. Rear wiper arm nut

REAR WIPER AND WASHER SYSTEMWW-51
C
DE
F
G H
I
J
L
M A
B
WW
Revision: November 2009 2006 QX56
Rear Washer Tube LayoutEKS00BEQ
NOTE:
Connect the check valve (2) to the washer fluid reservoir tube (1) so
that the directional arrow on the check valve (2) points towards the
washer nozzle tube (3).
Rear Washer NozzleEKS00BER
REMOVAL AND INSTALLATION
Removal
1. Remove the rear spoiler. Refer to EI-26, "REAR SPOILER" .
2. Release retaining clips, and remove washer nozzle.
INSTALLATION
Installation is in the reverse order of removal.
Removal and InstallationEKS00BET
REAR WIPER AND WASHER SWITCH
Refer to WW-30, "Wiper and Washer Switch" .
WKIA4566E
1. Rear washer nozzle 2. Washer fluid reservoir3. Check valve
WKIA4242E
LKIA0418E

WW-52
REAR WIPER AND WASHER SYSTEM
Revision: November 20092006 QX56
WASHER FLUID RESERVOIR
Refer to WW-30, "REMOVAL AND INSTALLATION" .
WASHER MOTOR
Refer to WW-31, "Washer Motor" .