2006 FORD GALAXY service

Engine - \b.0L E\foBoost SCTi
(149kW/\b03PS) - MI4 - Spe\fifi\fationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine Data
Engine Oil
Engine Oil Capa\fity
Lubri\fants, Fluids, Sealers and Adhesives
Oil Pressure
Valve Clearan\fe
Cylinder Head
Descrip\bion
Engine\fcodeTNBA
Firing\forder1-4-3-2
Emission\flevelSt\bge\fV
Bore\f87.5\fmm
Stroke83.1\fmm
Cubic\fc\bp\bcity1999\fcm³
Compression\fr\btio10\f:\f1
Power\foutput\f\bt\f6000\frpm149\fkW\f(203\fPS)
M\bximum\ftorque\f\bt\f1750\f-\f4000\frpm300\fNm
M\bximum\fengine\fspeed\f(intermittent)6800
M\bximum\fengine\fspeed\f(continous)6500
Idle\fspeed760
Number\fof\fm\bin\fbe\brings5
C\bmsh\bft\fdriveCh\bin
Oil\fconsumption0.5\fl/1000\fKm
Viscosi\b\f / ambien\b \bempera\bureT\fpeSpecifica\bion
Re\fommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for topping up only)
SAE\f10W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3/B3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fS/SDACEA\fA3/B3
Descrip\bionLi\bers
Service\ffill\fincluding\ffilter5.4
Service\ffill\fincluding\ffilter5.1
Spezifika\bionen
Se\bl\bnt,\foil\fp\bn\fcont\bct\fsurf\bce\fto\fcr\bnksh\bft\fre\br\fse\bl\fret\biner,\foil\fp\bn\fto\f
cylinder\fblock,\foil\fp\bn\fto\ffront\fcover,\fengine\ffront\fcover\fto\fcylinder\fblock/\foil\f p\bnWSE-M4G323-A4
Oil\fpressure\fswitch\f\bnd\fengine\ffront\fcover\fbl\bnking\fplug\fse\bl\bntWSK-M2G349- A7
Descrip\bionBar
Minimum\foil\fpressure\f\bt\f800\f-\f850\frpm\f(norm\bl\foper\bting\ftemper\bture)1.0
Minimum\foil\fpressure\f\bt\f4000\frpm\f(norm\bl\foper\bting\ftemper\bture)3.2\f-\f4.5
Descrip\bionmm
V\blve\fcle\br\bnce\f(engine\fcold),\fint\bke0.19\f-\f0.31
V\blve\fcle\br\bnce\f(engine\fcold),\fexh\bust0.29\f-\f0.41
Descrip\bionmm
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1248569&gu...procarmanuals.com
http://vnx.su

Engine - \b.3L \furatec-HE (118kW/160PS)
- MI4 - SpecificationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine data
Engine oil
Capacities
Lubricants, Fluids, Sealants and Adhesives
Valve clearances
Cylinder head
CAUTION: The cylinder head sealing surfaces must not be re-worked.
Specifica\bion
CodeSEWA
Firing\forder1-3-4-2
Emission\flevelSt\bge\fIV
Bore87.5\fmm
Stroke94\fmm
Engine\fC\bp\bcity2,261\fcm³
Compression\fr\btio10.6\f:\f1
Power\foutput\f\bt\f6500\frpm118\fkW\f(161\fPS)
Torque\f\bt\f1500\frpm182\fNm
M\bximum\ftorque\f\bt\f4000\frpm208\fNm
M\bximum\fengine\fspeed\f(for\f\b\fshort\fperiod)6675\frev/min
M\bximum\fengine\fspeed\f(continuous)6450\frev/min
Engine\fidle\fspeed700\f±\f50\frpm
Number\fof\fcr\bnksh\bft\fm\bin\fbe\brings5
C\bmsh\bft\fdriveTiming\fch\bin
M\bximum\foil\fconsumption0.5\fL/1000\fKm
Vi\fco\fi\by/ambien\b \bempera\bureType\fpecifica\bion
Recommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for topping up only)
SAE\f10W-40\f/\f-20°C\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3,\fB3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fS/SDACEA\fA3,\fB3
Li\ber\f
Initi\bl\ffill\fincluding\foil\ffilter4.6
Service\ffill\fincluding\foil\ffilter4.3
Service\ffill\fwithout\foil\ffilter3.9
Specifica\bion
Se\bl\bnt,\foil\fp\bn\fcont\bct\fsurf\bce\fto\fcr\bnksh\bft\fre\br\fse\bl\fret\biner,\foil\fp\bn\fto\f
cylinder\fblock,\foil\fp\bn\fto\ffront\fcover,\fengine\ffront\fcover\fto\fcylinder\fblock/\foil\f p\bnWSE-M4G323-
A4
Oil\fpressure\fswitch\f\bnd\fengine\ffront\fcover\fbl\bnking\fplug\fse\bl\bntWSK-M2G349- A7
Specifica\bion
V\blve\fcle\br\bnce\f(engine\fcold)\f-\fint\bke\fv\blves0,22\f-\f0,28
V\blve\fcle\br\bnce\f(engine\fcold)\f-\fexh\bust\fv\blves0,27\f-\f0,33
Specifica\bionmm
M\bximum\fdistortion,\fm\bting\ff\bce0,1
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898707&gui...procarmanuals.com
http://vnx.su

\f\f\fescription
Bolts\f-\fB\bl\bncer\fsh\bfts\f
B\bl\bncer\fsh\bft\funit\f
The\f2.3L\fDur\btec-HE\fh\bs\f\b\fmodul\br\fb\bl\bncer\fsh\bft\funit\fwith\ftwo\fb\bl\bncer\fsh\bfts.\fThe\f
b\b
l\bncer\fsh\bft\funit\fis\fincorpor\bted\fin\fthe\foil\fp\bn\f\bnd\fmounted\fbene\bth\fthe\fcylinder\fblock.\f
The\fb\bl\bncer\fsh\bfts\f\bre\fdriven\fby\fthe\fcr\bnksh\bft\fvi\b\fsprockets\f\bnd\frot\bte\f\bt\ftwice\fthe\f
cr\bnksh\bft\fspeed.\f
The\fb\bl\bncer\fsh\bft\funit\fmust\fnot\fbe\fremoved\f\bnd\fstripped\fdown\fin\fService.\f
Adv\bnt\bges\fof\fthe\fb\bl\bncer\fsh\bft\funit:\f

Reduces\fthe\f2nd\forder\fforces\fof\finerti\b\f\f

The\fmodul\br\fdesign\fminimises\fimp\bct\fon\fengine\fconstruction\f
It

em
1
2
\f
Part Number -
-
Стр. 3 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G898708&gui...procarmanuals.com
http://vnx.su

Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - SpecificationsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Engine \fata
Engine Oil
Engine Oil Capacity
Engine Oil Pressure
Valve Clearance
Valves
Descrip\bion
Engine\fcodeHUWA
Firing\forder1-2-4-5-3
Emission\flevelSt\bge\fIV
Bore83\fmm
Stroke93.2\fmm
Cubic\fc\bp\bcity2522\fcm³
Compression\fr\btio9\f:\f1
Power\foutput\f\bt\f5000\frpm162\fkW\f(220\fPS)
M\bx.\ftorque\f\bt\f1500\frpm320\fNm
M\bximum\fengine\fspeed\f(intermittent)6800\frpm
M\bximum\fengine\fspeed\f(continous)6500\frpm
Idle\fspeed800\frpm
Number\fof\fm\bin\fbe\brings6
C\bmsh\bft\fdriveTiming\fBelt
M\bximum\foil\fconsumption0.5\fl/1000\fKm
Viscosi\b\f / ambien\b \bempera\bureT\fpeSpecifica\bion
Recommended engine oil
SAE\f5W-30\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fEWSS-M2C913-C
Alternative engine oils (for top-up only)
SAE\f10W-40\f/\f-20°C\fto\fover\f+40°CFord\fFormul\b\fXR+ACEA\fA3/B3
SAE\f5W-40\f/\fbelow\f-20°C\fto\fover\f+40°CFord\fFormul\b\fSACEA\fA3/B3
Descrip\bionLi\bers
Service\ffill\fincluding\ffilter5.8
Service\ffill\fexcluding\ffilter5.5
Descrip\bionBar
Minimum\foil\fpressure\f\bt\f800\f-\f850\frpm\f(norm\bl\foper\bting\ftemper\bture)1.0
Minimum\foil\fpressure\f\bt\f4000\frpm\f(norm\bl\foper\bting\ftemper\bture)3.5
Oil\fpressure\frelief\fv\blve\fopening\fpressure4.8
Descrip\bionmm
V\blve\fcle\br\bnce\f(engine\fcold),\fint\bke0.17\f-\f0.23
V\blve\fcle\br\bnce\f(engine\fcold),\fexh\bust0.37\f-\f0.43
Descrip\bionmm
Int\bke\fv\blve\flenght101.93\f-\f102.07
Int\bke\fv\blve\fsh\bft\fdi\bmeter5.87\f-\f6.01
Int\bke\fv\blve\fguide\fcle\br\bnce0.05\f-\f0.07
Exh\bust\fv\blve\flenght101.43\f-\f101.57
Exh\bust\fv\blve\fsh\bft\fdi\bmeter5.87\f-\f6.01
Exh\bust\fv\blve\fguide\fcle\br\bnce0.05\f-\f0.07
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1037591&gu...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatorq-T\fCi (85kW/115PS) - \fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
(103kW/140PS) - \fW, Emission Requirements: Stage IV - Specifications
Engine \fata
Lu
bricants, Fluids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Block
Pistons
Piston ring gap position: The piston ring gaps must be distributed evenly around the circumference of the piston. This also applies to the oil control ring elements. Align the piston ring gaps at 1\b0 degrees to each other.
Crankshaft
Connecting Rod
Descrip\bion
Engine c\bde
Firing \brder
E\fissi\bn level
B\bre
Str\bke
Cubic capacity
C\b\fpressi\bn rati\b
P\bwer \butput at 4000 rp\f
T\brque at 1750 rp\f
Maxi\fu\f engine speed (inter\fittent)
Maxi\fu\f engine speed (c\bntin\bus)
Idle speed
Oil c\bnsu\fpti\bn
I\be\f
Engine \bil
C\b\blant
Sealant
Initial fill including \bil filter
Service fill including \bil filter
Service fill with\but \bil filter
Descrip\bion
Cylinder b\bre dia\feter
Main bearing parent b\bre dia\feter
Main bearing clearance - radial
Descrip\bion
Pist\bn dia\feter
Pist\bn clearance in cylinder
Pist\bn ring end gaps
— upper c\b\fpressi\bn ring
— l\bwer c\b\fpressi\bn ring
— \bil c\bntr\bl ring
Descrip\bion
Main bearing j\burnal dia\feter
C\bnnecting r\bd bearing j\burnal dia\feter
Crankshaft end play
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G509595&gui...procarmanuals.com
http://vnx.su

Engine - \b.0L \furatorq-T\fCi (85kW/115PS) - \fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
(103kW/140PS) - \fW, Emission Requirements: Stage IV - Specifications
Engine \fata
Lu
bricants, Fluids, Sealers and Adhesives
Engine Oil Capacity
Cylinder Block
Pistons
Piston ring gap position: The piston ring gaps must be distributed evenly around the circumference of the piston. This also applies to the oil control ring elements. Align the piston ring gaps at 1\b0 degrees to each other.
Crankshaft
Connecting Rod
Descrip\bion
Engine c\bde
Firing \brder
E\fissi\bn level
B\bre
Str\bke
Cubic capacity
C\b\fpressi\bn rati\b
P\bwer \butput at 4000 rp\f
T\brque at 1750 rp\f
Maxi\fu\f engine speed (inter\fittent)
Maxi\fu\f engine speed (c\bntin\bus)
Idle speed
Oil c\bnsu\fpti\bn
I\be\f
F\brd F\br\fula E SAE 10W-30 M\bt\bröl
C\b\blant
Sealant
Initial fill including \bil filter
Service fill including \bil filter
Service fill with\but \bil filter
Descrip\bion
Cylinder b\bre dia\feter
Main bearing parent b\bre dia\feter
Main bearing clearance - radial
Descrip\bion
Pist\bn dia\feter
Pist\bn clearance in cylinder
Pist\bn ring end gaps
— upper c\b\fpressi\bn ring
— l\bwer c\b\fpressi\bn ring
— \bil c\bntr\bl ring
Descrip\bion
Main bearing j\burnal dia\feter
C\bnnecting r\bd bearing j\burnal dia\feter
Crankshaft end play
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1023048&gu...procarmanuals.com
http://vnx.su

The\fv\blve\fcover\f\bnd\fthe\finlet\fm\bnifold\fform\fone\f\bssembly\f\bnd\f\bre\fm\bde\fof\fpl\bstic.\f
The\fPCV\fv\blve\fis\f\blso\floc\bted\fon\fthe\fv\blve\fcover.\f
It\fis\fse\bled\foff\ffrom\fthe\fcylinder\fhe\bd\fwith\f\b\fsep\br\bte\fse\bl.\f
The\fcylinder\fhe\bd's\fint\bke\fports\f\bnd\finjector\fports\f\bre\fe\bch\fse\bled\foff\ffrom\fthe\finlet\f
m\bnifold\fby\ffour\fse\bling\frings.\f
NOTE:\fRefer\fto\fthe\fcurrent\fservice\fliter\bture\ffor\fprec
ise\fdet\bils\fof\fhow\fto\f\bssemble\fthe\f
v\blve\fcover\f\bnd\finlet\fm\bnifold.\f
Before\fre-inst\blling\fthe\fv\blve\fcover\f\bnd\fthe\finlet\fm\bn
ifold,\fc\brefully\fcheck\fthe\fse\bling\frings\f
for\fd\bm\bge\f\bnd\frenew\fif\fnecess\bry.\f
Cylinder head
\f\f
\fescription
Se\bl\f
Exh\bust\fc\bmsh\bft\f
Inlet\fc\bmsh\bft\f
Alignment\fsleeves\f
Timing\fch\bin\f
The\f\bluminium\fcylinder\fhe\bd\fh\bs\ffour\fv\blves\fper\fcombustion\fch\bmber.\fThe\fv\blve\fse\bts\f\bnd\f
gu
ides\f\bre\fm\bde\fof\fsintered\fsteel.\f
The\finlet\fports\f\bre\floc\bted\fon\fthe\ffront\fof\fthe\fcylinder\fhe\bd,\fthe\fexh\bust\fports\f\bt\fthe\fb\bck\f
(with\frespect\fto\fthe\fdirection\fof\ftr\bvel).\f Item
1
2
3
4
5
\f
Part Number -
-
-
-
-
Стр. 4 из 14
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G187588&gui...procarmanuals.com
http://vnx.su

NOTE:\fRefer\fto\fthe\fcurrent\fservice\fliter\bture\ffor\fthe\fex\bct\fprocedure\f\bnd\fthe\fcorrect\f
me\bsurements\ffor\fm\bchining.\f
The\fcylinder\fblock\fis\fm\bde\fof\fc\bst\firon\f\bnd\fh\bs\fno\fcyl
inder\fliners.\f
The\frunning\fsurf\bces\fof\fthe\fcylinders\f\bre\fworked\fdirectly\finto\fthe\fcylinder\fblock.\f
The\fm\bting\ff\bce\fof\fthe\fcylinder\fblock\fwith\fthe\fcylinder\fhe\bd\fc\bn\fbe\fre-worked.\f
Two\fholes\f\bre\fprovided\fin\fthe\fcylinder\fblock,\ffor\fthe\fguide\fsleeves\fused\fto\fsecure\fthe\f
cylinder\fhe\bd\fg\bsket.\f
Connecting rods
\f\f
\fescription
Big-end\fbe\bring\fshells\f
NOTE:\fRefer\fto\fthe\fcurrent\fservice\fliter\bture\ffor\fthe\fex\bct\fprocedure\f\bnd\fthe\fcorrect\f
ti
ghtening\ftorques\ffor\finst\blling\fthe\fbig\fend\fbe\brings.\f
The\fconnecting\frods\f\bre\fm\bde\fof\fforged\fsteel.\f
The

\fbig-end\fbe\bring\fc\bps\f\bre\fcut\f\bnd\fm\bchined\f\bt\fthe\fjoins\fto\fthe\fconnecting\frod.\f
The\fbig\fend\fbe\bring\fshells\fh\bve\fret\bining\flugs\fto\fprevent\fr\bdi\bl\fmovement.\f
The\fret\bining\fnuts\f\bre\ftightened\fin\fthree\fst\bges.\fIn\fthe\fthird\fst\bge\fthe\fnuts\f\bre\ftightened\f
to\f\b\fspecified\f\bngle.\f
The\fconnecting\frods\f\bnd\fbig-end\fbe\bring\fc\bps\f\bre\fp\bired\f\bnd\fmust\fnot\fbe\fmixed\fup.\f
Crankshaft main bearings Item
1
\f
\f\f
Part Number -
Стр. 10 из 14
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G187588&gui...procarmanuals.com
http://vnx.su