05±1538
± DIAGNOSTICSPOWER DOOR LOCK CONTROL SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)ItemDiagnostic
Note Normal Condition Measurement Item/Display
(Range)
DOOR HANDLE SW
Back door opener switch signal
(Outside handle switch)
/ON or OFFON: Back door opener switch is pushed
OFF: Back door opener switch is not pushed±
LOCK STATUSBack door position switch signal
/UNLOCK or LOCKUNLOCK: Back door is unlock
LOCK: Back door is lock±
4. ACTIVE TEST
HINT:
Performing the ACTIVE TEST using the hand±held tester allows you to operate the relay, VSV, actuator,
etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to
shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) According to the display on the tester, perform the ACTIVE TEST.
Standard (Integration relay):
ItemTest DetailsDiagnostic Note
DOOR LOCKOperate door lock motor for all doors LOCK/OFF±
DOOR LOCKOperate door lock motor for all doors UNLOCK/OFF±
