2005 NISSAN X-TRAIL transmission

CAN SYSTEM (TYPE 2)
LAN-27
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN

CAN SYSTEM (TYPE 2)PFP:23710
System DescriptionEKS00LU9
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00LUA
SKIA9768E

CAN SYSTEM (TYPE 3)
LAN-43
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN

CAN SYSTEM (TYPE 3)PFP:23710
System DescriptionEKS00LUK
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00LUL
SKIB0084E

LAN-68
[CAN]
CAN SYSTEM (TYPE 4)

CAN SYSTEM (TYPE 4)PFP:23710
System DescriptionEKS00LUX
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00LUY
SKIB0125E

LAN-86
[CAN]
CAN SYSTEM (TYPE 5)

CAN SYSTEM (TYPE 5)PFP:23710
System DescriptionEKS00LV9
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00LVA
SKIB0125E

LAN-104
[CAN]
CAN SYSTEM (TYPE 6)

CAN SYSTEM (TYPE 6)PFP:23710
System DescriptionEKS00LVL
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00LVM
SKIB0127E

LAN-130
[CAN]
CAN SYSTEM (TYPE 7)

CAN SYSTEM (TYPE 7)PFP:23710
System DescriptionEKS00NKZ
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00NL0
SKIB0327E

CAN SYSTEM (TYPE 8)
LAN-143
[CAN]
C
D
E
F
G
H
I
J
L
MA
B
LAN

CAN SYSTEM (TYPE 8)PFP:23710
System DescriptionEKS00NHR
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00NHS
SKIB0327E

LAN-156
[CAN]
CAN SYSTEM (TYPE 9)

CAN SYSTEM (TYPE 9)PFP:23710
System DescriptionEKS00NL8
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector LocationEKS00NL9
PKIC0346E