2005 MERCEDES-BENZ SPRINTER ambient temperature indicator

IGNITION LOCK SWITCH - BLACK
CAV CIRCUIT FUNCTION
1 20BR GROUND
2 20BL/BK KEY-IN IGNITION SWITCH SIGNAL
INSTRUMENT CLUSTER C1
CAV CIRCUIT FUNCTION
1 20BR FUEL LEVEL SENSOR SIGNAL
2 20BR/DG AMBIENT TEMPERATURE SENSOR SIGNAL (-)
4 20WT/GY K-IC/ATC/HBM/CHM
5 20BR/BK PARKING BRAKE SIGNAL
7 20BK/DG RIGHT TURN SIGNAL
10 20BL/BK FUEL LEVEL SENSOR SIGNAL (+)
11 20BL/DG AMBIENT TEMPERATURE SENSOR SIGNAL (+)
14 20DG/WT/BL ENGINE COOLANT LEVEL SWITCH SIGNAL
15 20BR/WT FRONT COURTESY LAMPS CONTROL
16 20YL/RD SEAT BELT SWITCH SIGNAL
17 20DG CAN C BUS (-)
18 20DG/WT CAN C BUS (+)
INSTRUMENT CLUSTER C2 - WHITE
CAV CIRCUIT FUNCTION
3 20RD/YL FUSED B(+)
4 20BR/WT BRAKE WEAR SENSOR SIGNAL
6 18BR GROUND
7 20GY/DG/RD LAMP DRIVER
8 20BL/WT FUSED HIGH BEAM SWITCH OUTPUT
9 20BL/RD/WT VEHICLE SPEED SENSOR OUTPUT
10 20BK FUSED IGNITION SWITCH OUTPUT (RUN-START)
11 20BL/BK KEY-IN IGNITION SWITCH SIGNAL
13 20BK/WT LEFT TURN SIGNAL
15 20BL TERMINAL 61
16 20YL AIRBAG WARNING INDICATOR DRIVER
18 20BL/VT D(+) RELAY NO. 1 CONTROL
18 20BL/VT IC 18-C2 TO ATCM 8-C1
VA8W-80 CONNECTOR PIN-OUTS 8W - 80 - 43

INDEX
ABS INDICATOR - DESCRIPTION..........8J-9
ABS INDICATOR - OPERATION...........8J-9
A/C COMPRESSOR - DESCRIPTION......24-49
A/C COMPRESSOR - INSTALLATION......24-51
A/C COMPRESSOR - OPERATION........24-49
A/C COMPRESSOR - REMOVAL.........24-50
A/C COMPRESSOR CLUTCH -
DESCRIPTION........................24-8
A/C COMPRESSOR CLUTCH -
OPERATION..........................24-8
A/C CONDENSER - DESCRIPTION........24-52
A/C CONDENSER - INSTALLATION.......24-52
A/C CONDENSER - OPERATION..........24-52
A/C CONDENSER - REMOVAL...........24-52
A/C DISCHARGE LINE - INSTALLATION . . . 24-54
A/C DISCHARGE LINE - REMOVAL.......24-53
A/C EVAPORATOR - DESCRIPTION.......24-54
A/C EVAPORATOR - INSTALLATION......24-55
A/C EVAPORATOR - OPERATION.........24-54
A/C EVAPORATOR - REMOVAL..........24-55
A/C EXPANSION VALVE - DESCRIPTION . . . 24-55
A/C EXPANSION VALVE - DIAGNOSIS
AND TESTING.......................24-56
A/C EXPANSION VALVE - INSTALLATION . . 24-56
A/C EXPANSION VALVE - OPERATION.....24-55
A/C EXPANSION VALVE - REMOVAL.......24-56
A/C HEATER CONTROL - DESCRIPTION . . . 24-12
A/C HEATER CONTROL - INSTALLATION . . . 24-13
A/C HEATER CONTROL - OPERATION.....24-12
A/C HEATER CONTROL - REMOVAL......24-12
A/C HOUSING - INSTALLATION, REAR....24-41
A/C HOUSING - REMOVAL, REAR........24-40
A/C PERFORMANCE TEST - DIAGNOSIS
AND TESTING........................24-3
A/C PRESSURE TRANSDUCER -
DESCRIPTION.......................24-13
A/C PRESSURE TRANSDUCER -
DIAGNOSIS AND TESTING.............24-13
A/C PRESSURE TRANSDUCER -
INSTALLATION.......................24-14
A/C PRESSURE TRANSDUCER -
OPERATION.........................24-13
A/C PRESSURE TRANSDUCER -
REMOVAL..........................24-14
A/C SYSTEM, SPECIFICATIONS...........24-5
ACCELERATOR PEDAL POSITION
SENSOR - DESCRIPTION...............14-17
ACCESSORY DRIVE BELT - DIAGNOSIS
AND TESTING.........................7-5
ACCESSORY SWITCH BEZEL -
INSTALLATION.......................23-54
ACCESSORY SWITCH BEZEL - REMOVAL . . 23-54
ACTUATOR - DESCRIPTION,
RECIRCULATION DOOR................24-20
ACTUATOR - INSTALLATION, INSIDE
HANDLE.......................23-34,23-37
ACTUATOR - INSTALLATION,
RECIRCULATION DOOR................24-21
ACTUATOR - OPERATION,
RECIRCULATION DOOR................24-20
ACTUATOR - REMOVAL, INSIDE HANDLE . 23-34,
23-37
ACTUATOR - REMOVAL, RECIRCULATION
DOOR.............................24-21
ADAPTATION - STANDARD PROCEDURE,
TCM................................8E-8
ADDING ADDITIONAL COOLANT -
STANDARD PROCEDURE................7-11
ADDITIONAL COOLANT - STANDARD
PROCEDURE, ADDING..................7-11
ADJUSTER - INSTALLATION, SEAT BELT
TURNING LOOP.....................8O-34
ADJUSTER - REMOVAL, SEAT BELT
TURNING LOOP.....................8O-33
ADJUSTERS - FRONT - INSTALLATION,
SEAT ..............................23-78
ADJUSTERS - FRONT - REMOVAL, SEAT . . 23-78
AFTER A SUPPLEMENTAL RESTRAINT
DEPLOYMENT - STANDARD
PROCEDURE, SERVICE.................8O-6
AIR CLEANER ELEMENT - INSTALLATION . . 9-20
AIR CLEANER ELEMENT - REMOVAL
......9-20
AIR CLEANER HOUSING - INSTALLATION
. . 9-20
AIR CLEANER HOUSING - REMOVAL
......9-20
AIR CONDITIONER - DESCRIPTION,
HEATER
.............................24-1
AIR CONDITIONER - OPERATION,
HEATER
.............................24-2AIR COOLER AND PLUMBING -
CLEANING, CHARGE...................11-5
AIR COOLER AND PLUMBING -
DESCRIPTION, CHARGE................11-4
AIR COOLER AND PLUMBING -
INSPECTION, CHARGE.................11-5
AIR COOLER AND PLUMBING -
INSTALLATION, CHARGE................11-5
AIR COOLER AND PLUMBING -
OPERATION, CHARGE..................11-4
AIR COOLER AND PLUMBING -
REMOVAL, CHARGE...................11-5
AIR COOLER SYSTEM - LEAKS -
DIAGNOSIS AND TESTING, CHARGE.......11-4
AIR FILTER - INSTALLATION.......24-31,24-39
AIR FILTER - REMOVAL..........24-31,24-39
AIR FLOW (MAF) SENSOR -
DESCRIPTION, MANIFOLD.............14-30
AIR FLOW (MAF) SENSOR -
INSTALLATION, MANIFOLD.............14-31
AIR FLOW (MAF) SENSOR - OPERATION,
MANIFOLD..........................14-30
AIR FLOW (MAF) SENSOR - REMOVAL,
MANIFOLD..........................14-31
AIR GAP - STANDARD PROCEDURE,
COMPRESSOR CLUTCH................24-9
AIR IN FUEL SYSTEM - DIAGNOSIS AND
TESTING............................14-2
AIR OUTLET TEMPERATURE SENSOR -
DESCRIPTION.......................24-14
AIR OUTLET TEMPERATURE SENSOR -
INSTALLATION.......................24-15
AIR OUTLET TEMPERATURE SENSOR -
OPERATION.........................24-15
AIR OUTLET TEMPERATURE SENSOR -
REMOVAL..........................24-15
AIR OUTLETS - INSTALLATION..........24-32
AIR OUTLETS - REMOVAL.............24-31
AIR TEMPERATURE SENSOR -
DESCRIPTION, INLET.................14-29
AIR TEMPERATURE SENSOR -
INSTALLATION, INLET.................14-30
AIR TEMPERATURE SENSOR -
OPERATION, INLET...................14-29
AIR TEMPERATURE SENSOR -
REMOVAL, INLET....................14-30
AIRBAG - DESCRIPTION, DRIVER........8O-16
AIRBAG - DESCRIPTION, PASSENGER....8O-23
AIRBAG - INSTALLATION, DRIVER.......8O-18
AIRBAG - INSTALLATION, PASSENGER . . . 8O-26
AIRBAG - OPERATION, DRIVER.........8O-17
AIRBAG - OPERATION, PASSENGER......8O-24
AIRBAG - REMOVAL, DRIVER...........8O-17
AIRBAG - REMOVAL, PASSENGER.......8O-24
AIRBAG BRACKET - INSTALLATION,
PASSENGER........................8O-27
AIRBAG BRACKET - REMOVAL,
PASSENGER........................8O-27
AIRBAG CONTROL MODULE -
DESCRIPTION........................8O-8
AIRBAG CONTROL MODULE -
INSTALLATION......................8O-11
AIRBAG CONTROL MODULE -
OPERATION..........................8O-9
AIRBAG CONTROL MODULE - REMOVAL . . 8O-10
AIRBAG INDICATOR - DESCRIPTION......8J-10
AIRBAG INDICATOR - OPERATION.......8J-10
ALB CONTROLLER - INSTALLATION
.......5-15
ALB CONTROLLER - REMOVAL
...........5-15
ALB LEVER - INSTALLATION
.............5-15
ALB LEVER - REMOVAL
................5-15
ALIGNMENT - DESCRIPTION, WHEEL
......2-17
ALIGNMENT - SPECIFICATIONS, WHEEL
....2-19
ALUMINUM THREAD REPAIR -
STANDARD PROCEDURE
...............21-27
AMBIENT TEMPERATURE INDICATOR -
DESCRIPTION
.......................8J-11
AMBIENT TEMPERATURE INDICATOR -
OPERATION
.........................8J-11
AMBIENT TEMPERATURE SENSOR -
DESCRIPTION
.......................24-15
AMBIENT TEMPERATURE SENSOR -
INSTALLATION
.......................24-16
AMBIENT TEMPERATURE SENSOR -
OPERATION
.........................24-15
AMBIENT TEMPERATURE SENSOR -
REMOVAL
..........................24-15ANTENNA BODY & CABLE -
INSTALLATION.......................8A-1
ANTENNA BODY & CABLE - REMOVAL.....8A-1
ANTENNA CABLE - INSTALLATION,
INSTRUMENT PANEL..................8A-2
ANTENNA CABLE - REMOVAL,
INSTRUMENT PANEL..................8A-1
ANTILOCK BRAKE - DESCRIPTION,
CONTROLLER........................8E-3
ANTILOCK BRAKE - INSTALLATION,
CONTROLLER........................8E-3
ANTILOCK BRAKE - REMOVAL,
CONTROLLER........................8E-3
A-PILLAR TRIM - INSTALLATION........23-68
A-PILLAR TRIM - REMOVAL............23-67
ARM - DESCRIPTION, WIPER...........8R-13
ARM - INSTALLATION, CENTER ROLLER . . 23-38
ARM - INSTALLATION, LOWER CONTROL . . . 2-6
ARM - INSTALLATION, LOWER ROLLER . . . 23-38
ARM - INSTALLATION, UPPER ROLLER . . . 23-37
ARM - INSTALLATION, WIPER..........8R-14
ARM - OPERATION, WIPER............8R-14
ARM - REMOVAL, CENTER ROLLER......23-37
ARM - REMOVAL, LOWER CONTROL.......2-6
ARM - REMOVAL, LOWER ROLLER......23-38
ARM - REMOVAL, UPPER ROLLER.......23-37
ARM - REMOVAL, WIPER..............8R-14
ARMREST - INSTALLATION.............23-76
ARMREST - REMOVAL................23-76
ASH RECEIVER - INSTALLATION.........23-55
ASH RECEIVER - REMOVAL............23-55
ASH RECEIVER/CIGAR LIGHTER LAMP
UNIT - INSTALLATION.................8L-27
ASH RECEIVER/CIGAR LIGHTER LAMP
UNIT - REMOVAL....................8L-27
ASSIST HANDLE - INSTALLATION........23-68
ASSIST HANDLE - REMOVAL...........23-68
AUDIO, SPECIAL TOOLS................8A-1
AUTOMATIC TRANSMISSION -
DIAGNOSIS AND TESTING........21-23,21-24
AUTOMATIC TRANSMISSION - NAG1 -
DESCRIPTION........................21-2
AUTOMATIC TRANSMISSION - NAG1 -
OPERATION..........................21-4
AUTOMATIC TRANSMISSION - SPECIAL
TOOLS, NAG1.......................21-69
AUTOMATIC TRANSMISSION -
SPECIFICATIONS, NAG1...............21-68
AUTOMATIC TRANSMISSION FLUID -
NAG1 - DESCRIPTION...................0-4
AUTOMATIC TRANSMISSION FLUID -
OPERATION...........................0-4
AUXILIARY BATTERY INSTALLATION,
INSTALLATION.......................8F-13
AUXILIARY BATTERY REMOVAL,
REMOVAL..........................8F-13
AXLE - DESCRIPTION...................0-3
AXLE - DESCRIPTION, REAR.............3-10
AXLE - DIAGNOSIS AND TESTING, REAR . . . 3-10
AXLE - INSTALLATION, REAR............3-12
AXLE - OPERATION, REAR..............3-10
AXLE - REMOVAL, REAR................3-11
AXLE - SPECIAL TOOLS, REAR...........3-14
AXLE - SPECIFICATIONS, REAR..........3-13
AXLE BEARINGS/SEALS - INSTALLATION . . . 3-17
AXLE BEARINGS/SEALS - REMOVAL......3-17
AXLE HUB BEARINGS/SEALS -
INSTALLATION........................3-20
AXLE HUB BEARINGS/SEALS - REMOVAL . . 3-20
AXLE SHAFTS - DUAL REAR WHEELS -
INSTALLATION........................3-19
AXLE SHAFTS - DUAL REAR WHEELS -
REMOVAL...........................3-19
AXLE SHAFTS - INSTALLATION...........3-15
AXLE SHAFTS - REMOVAL..............3-15
B1 - ASSEMBLY, HOLDING CLUTCH.....21-113
B1 - DISASSEMBLY, HOLDING CLUTCH . . 21-112
B2 - ASSEMBLY, HOLDING CLUTCH.....21-116
B2 - DISASSEMBLY, HOLDING CLUTCH . . 21-115
BACK - FRONT - INSTALLATION, SEAT....23-77
BACK - FRONT - REMOVAL, SEAT
.......23-77
BACK CUSHION/COVER - REAR -
INSTALLATION, SEAT
.................23-80
BACK CUSHION/COVER - REAR -
REMOVAL, SEAT
.....................23-80
BACK SHIELD - INSTALLATION, REAR
SEAT
..............................23-79
BACK SHIELD - REMOVAL, REAR SEAT
. . . 23-79
VAINDEX 1
Description Group-Page Description Group-Page Description Group-Page

HAT BRAKE - CLEANING, REAR DRUM
IN .................................5-27
HCU (HYDRAULIC CONTROL UNIT) -
DESCRIPTION........................5-31
HCU (HYDRAULIC CONTROL UNIT) -
INSTALLATION........................5-32
HCU (HYDRAULIC CONTROL UNIT) -
REMOVAL...........................5-31
HEAD - INSTALLATION, CYLINDER........9-25
HEAD - REMOVAL, CYLINDER...........9-22
HEAD BOLT INSPECTION - STANDARD
PROCEDURE, CYLINDER................9-21
HEAD COVER(S) - INSTALLATION,
CYLINDER...........................9-30
HEAD COVER(S) - REMOVAL, CYLINDER . . . 9-30
HEAD FRONT COVER - INSTALLATION,
CYLINDER...........................9-26
HEAD FRONT COVER - REMOVAL,
CYLINDER...........................9-23
HEAD GUIDE RAIL - INSTALLATION,
CYLINDER...........................9-26
HEAD GUIDE RAIL - REMOVAL,
CYLINDER...........................9-24
HEAD SURFACE - STANDARD
PROCEDURE, MEASURE CYLINDER.......9-21
HEADLAMP BULB - INSTALLATION, HIGH
BEAM..............................8L-17
HEADLAMP BULB - INSTALLATION, LOW
BEAM..............................8L-19
HEADLAMP BULB - REMOVAL, HIGH
BEAM..............................8L-17
HEADLAMP BULB - REMOVAL, LOW
BEAM...............................8L-18
HEADLAMP LEVELING MOTOR -
INSTALLATION.......................8L-16
HEADLAMP LEVELING MOTOR -
REMOVAL..........................8L-15
HEADLAMP LEVELING SWITCH -
INSTALLATION.......................8L-17
HEADLAMP LEVELING SWITCH -
REMOVAL..........................8L-16
HEADLINER - INSTALLATION...........23-71
HEADLINER - REMOVAL...............23-70
HEADREST - INSTALLATION............23-76
HEADREST - REMOVAL................23-76
HEATED SEAT ELEMENT - DESCRIPTION . . . 8G-3
HEATED SEAT ELEMENT - DIAGNOSIS
AND TESTING........................8G-3
HEATED SEAT ELEMENT - OPERATION.....8G-3
HEATED SEAT RELAY - DESCRIPTION.....8G-4
HEATED SEAT RELAY - DIAGNOSIS AND
TESTING............................8G-4
HEATED SEAT RELAY - INSTALLATION.....8G-4
HEATED SEAT RELAY - OPERATION.......8G-4
HEATED SEAT RELAY - REMOVAL........8G-4
HEATED SEAT SENSOR - DESCRIPTION....8G-4
HEATED SEAT SENSOR - DIAGNOSIS
AND TESTING........................8G-4
HEATED SEAT SWITCH - DESCRIPTION,
DRIVER.............................8G-2
HEATED SEAT SWITCH - DESCRIPTION,
PASSENGER.........................8G-5
HEATED SEAT SWITCH - DIAGNOSIS
AND TESTING, DRIVER.................8G-2
HEATED SEAT SWITCH - DIAGNOSIS
AND TESTING, PASSENGER.............8G-5
HEATED SEAT SWITCH - INSTALLATION,
DRIVER.............................8G-3
HEATED SEAT SWITCH - INSTALLATION,
PASSENGER.........................8G-5
HEATED SEAT SWITCH - OPERATION,
DRIVER.............................8G-2
HEATED SEAT SWITCH - OPERATION,
PASSENGER.........................8G-5
HEATED SEAT SWITCH - REMOVAL,
DRIVER.............................8G-3
HEATED SEAT SWITCH - REMOVAL,
PASSENGER.........................8G-5
HEATED SEATS - DESCRIPTION..........8G-1
HEATED SEATS - DIAGNOSIS AND
TESTING............................8G-2
HEATED SEATS - OPERATION
............8G-2
HEATER - DCHA - DIAGNOSIS AND
TESTING, DIESEL SUPPLEMENTAL
.......24-72
HEATER - DESCRIPTION, CABIN
.........24-72
HEATER - INSTALLATION, ENGINE
BLOCK
..............................7-14
HEATER - OPERATION, CABIN
...........24-72HEATER - REMOVAL, ENGINE BLOCK......7-14
HEATER AND AIR CONDITIONER -
DESCRIPTION........................24-1
HEATER AND AIR CONDITIONER -
OPERATION..........................24-2
HEATER CONTROL - DESCRIPTION, A/C . . . 24-12
HEATER CONTROL - INSTALLATION, A/C . . 24-13
HEATER CONTROL - OPERATION, A/C....24-12
HEATER CONTROL - REMOVAL, A/C......24-12
HEATER CORE - DESCRIPTION..........24-57
HEATER CORE - INSTALLATION.........24-58
HEATER CORE - OPERATION............24-57
HEATER CORE - REMOVAL.............24-58
HEATER PERFORMANCE - DIAGNOSIS
AND TESTING........................24-4
HI PRESSURE FUEL SHUTOFF SOL -
DESCRIPTION.......................14-16
HI PRESSURE FUEL SHUTOFF SOL -
OPERATION.........................14-16
HIGH BEAM HEADLAMP BULB -
INSTALLATION.......................8L-17
HIGH BEAM HEADLAMP BULB -
REMOVAL..........................8L-17
HIGH BEAM INDICATOR - DESCRIPTION . . 8J-17
HIGH BEAM INDICATOR - OPERATION....8J-17
HIGH FUEL SYSTEM PRESSURE -
WARNING...........................14-1
HIGH MOUNTED STOP LAMP BULB -
INSTALLATION, CENTER................8L-7
HIGH MOUNTED STOP LAMP BULB -
REMOVAL, CENTER....................8L-7
HIGH MOUNTED STOP LAMP UN -
INSTALLATION, CENTER................8L-8
HIGH MOUNTED STOP LAMP UN -
REMOVAL, CENTER....................8L-8
HIGH PRESSURE FUEL LINES -
DIAGNOSIS AND TESTING..............14-1
HIGH PRESSURE LINES - INSTALLATION . . . 14-7
HIGH PRESSURE LINES - REMOVAL......14-6
HIGH PRESSURE PUMP - DESCRIPTION . . . 14-7
HIGH PRESSURE PUMP - INSTALLATION . . 14-10
HIGH PRESSURE PUMP - REMOVAL......14-8
HIGH SPEEDS - DESCRIPTION, TIRE
PRESSURE..........................22-6
HINGE - INSTALLATION......23-17,23-34,23-50
HINGE - REMOVAL.........23-17,23-34,23-50
HITCH - INSTALLATION, TRAILER........13-10
HITCH - REMOVAL, TRAILER............13-9
HOAT COOLANT - DESCRIPTION..........0-2
HOISTING - STANDARD PROCEDURE.......0-5
HOLDDOWN - DESCRIPTION, BATTERY . . . 8F-14
HOLDDOWN - INSTALLATION, BATTERY . . . 8F-14
HOLDDOWN - REMOVAL, BATTERY......8F-14
HOLDER - INSTALLATION, CUP.........23-56
HOLDER - REMOVAL, CUP.............23-55
HOLDING CLUTCH B1 - ASSEMBLY.....21-113
HOLDING CLUTCH B1 - DISASSEMBLY . . 21-112
HOLDING CLUTCH B2 - ASSEMBLY.....21-116
HOLDING CLUTCH B2 - DISASSEMBLY . . 21-115
HOLDING CLUTCHES - DESCRIPTION....21-111
HOLDING CLUTCHES - OPERATION.....21-112
HOLE REPAIR - DESCRIPTION,
THREADED........................Intro.-5
HOOD - INSTALLATION................23-50
HOOD - REMOVAL....................23-50
HOOD BATTERY INSTALLATION,
INSTALLATION - UNDER...............8F-13
HOOD BATTERY REMOVAL, REMOVAL -
UNDER.............................8F-12
HORN - INSTALLATION.................8H-1
HORN - REMOVAL....................8H-1
HORN SWITCH - INSTALLATION
..........8H-1
HORN SWITCH - REMOVAL
.............8H-1
HOSE - INSTALLATION, INLET
..........24-78
HOSE - INSTALLATION, PRESSURE
......19-15
HOSE - REMOVAL, INLET
..............24-78
HOSE - REMOVAL, PRESSURE
..........19-15
HOSE FROM GEAR TO COOLER TUBE -
INSTALLATION, RETURN
...............19-15
HOSE FROM GEAR TO COOLER TUBE -
REMOVAL, RETURN
..................19-15
HOSES/LINES/TUBES PRECAUTIONS,
CAUTION - REFRIGERANT
..............24-45
HOSES/TUBES - DESCRIPTION, WASHER
. . 8R-8
HOSES/TUBES - OPERATION, WASHER
....8R-9
HOUSING - ASSEMBLY, HVAC
...........24-36
HOUSING - DISASSEMBLY, HVAC
........24-36HOUSING - INSTALLATION, AIR
CLEANER............................9-20
HOUSING - INSTALLATION, HVAC........24-36
HOUSING - INSTALLATION, REAR A/C....24-41
HOUSING - REMOVAL, AIR CLEANER......9-20
HOUSING - REMOVAL, HVAC...........24-34
HOUSING - REMOVAL, REAR A/C........24-40
HOW TO USE WIRING DIAGRAMS -
DESCRIPTION.....................8W-01-1
HUB / BEARING - INSTALLATION..........2-5
HUB / BEARING - REMOVAL..............2-4
HUB BEARINGS/SEALS - INSTALLATION,
AXLE...............................3-20
HUB BEARINGS/SEALS - REMOVAL,
AXLE...............................3-20
HUB SEAL - INSTALLATION, TORQUE
CONVERTER.......................21-147
HUB SEAL - REMOVAL, TORQUE
CONVERTER.......................21-147
HVAC HOUSING - ASSEMBLY...........24-36
HVAC HOUSING - DISASSEMBLY........24-36
HVAC HOUSING - INSTALLATION........24-36
HVAC HOUSING - REMOVAL............24-34
IDENTIFICATION - DESCRIPTION,
FASTENER.........................Intro.-2
IDENTIFICATION AND INFORMATION -
DESCRIPTION, SECTION.............8W-01-5
IDENTIFICATION NUMBER -
DESCRIPTION, VEHICLE..............Intro.-1
IGNITION CONTROL - SPECIAL TOOLS......8I-1
IGNITION-OFF DRAW TEST - STANDARD
PROCEDURE........................8F-10
INBOARD - INSTALLATION.............8O-30
INBOARD - REMOVAL.................8O-29
IN-CAR TEMPERATURE SENSOR -
DESCRIPTION.......................24-19
IN-CAR TEMPERATURE SENSOR -
DIAGNOSIS AND TESTING.............24-19
IN-CAR TEMPERATURE SENSOR -
OPERATION.........................24-19
IN-CAR TEMPERATURE SENSOR -
REMOVAL..........................24-19
INCORRECT FLUID LEVEL - DIAGNOSIS
AND TESTING, EFFECTS OF............21-102
INDICATOR - DESCRIPTION, ABS.........8J-9
INDICATOR - DESCRIPTION, AIRBAG.....8J-10
INDICATOR - DESCRIPTION, AMBIENT
TEMPERATURE......................8J-11
INDICATOR - DESCRIPTION, BRAKE
WEAR.............................8J-12
INDICATOR - DESCRIPTION, BRAKE/
PARK BRAKE........................8J-11
INDICATOR - DESCRIPTION, CHARGING . . . 8J-13
INDICATOR - DESCRIPTION, COOLANT
LOW...............................8J-14
INDICATOR - DESCRIPTION, FUEL
FILTER CLOGGED.....................8J-15
INDICATOR - DESCRIPTION, GEAR
SELECTOR..........................8J-17
INDICATOR - DESCRIPTION, HIGH BEAM . . 8J-17
INDICATOR - DESCRIPTION, LOW FUEL . . . 8J-18
INDICATOR - DESCRIPTION, LOW OIL
LEVEL.............................8J-18
INDICATOR - DESCRIPTION,
MAINTENANCE.......................8J-19
INDICATOR - DESCRIPTION, MULTI-
FUNCTION..........................8J-20
INDICATOR - DESCRIPTION, SEATBELT . . . 8J-22
INDICATOR - DESCRIPTION, TRACTION
CONTROL...........................8J-24
INDICATOR - DESCRIPTION, TRACTION
CONTROL MALFUNCTION..............8J-25
INDICATOR - DESCRIPTION, TURN
SIGNAL............................8J-25
INDICATOR - DESCRIPTION, WAIT-TO-
START .............................8J-26
INDICATOR - DESCRIPTION, WASHER
FLUID..............................8J-27
INDICATOR - DESCRIPTION, WATER-IN-
FUEL..............................8J-27
INDICATOR - OPERATION, ABS...........8J-9
INDICATOR - OPERATION, AIRBAG
.......8J-10
INDICATOR - OPERATION, AMBIENT
TEMPERATURE
......................8J-11
INDICATOR - OPERATION, BRAKE WEAR
. . 8J-12
INDICATOR - OPERATION, BRAKE/PARK
BRAKE
.............................8J-12
INDICATOR - OPERATION, CHARGING
....8J-13
8 INDEXVA
Description Group-Page Description Group-Page Description Group-Page

SENDING UNIT / SENSOR -
DESCRIPTION, FUEL LEVEL............14-15
SENDING UNIT / SENSOR -
INSTALLATION, FUEL LEVEL............14-15
SENDING UNIT / SENSOR - REMOVAL,
FUEL LEVEL.........................14-15
SENSITIVE DEVICES - STANDARD
PROCEDURE, ELECTROSTATIC
DISCHARGE (ESD).................8W-01-7
SENSOR - DESCRIPTION, ACCELERATOR
PEDAL POSITION....................14-17
SENSOR - DESCRIPTION, AIR OUTLET
TEMPERATURE......................24-14
SENSOR - DESCRIPTION, AMBIENT
TEMPERATURE......................24-15
SENSOR - DESCRIPTION, BOOST
PRESSURE.........................14-17
SENSOR - DESCRIPTION, CAMSHAFT
POSITION..........................14-19
SENSOR - DESCRIPTION, CRANKSHAFT
POSITION..........................14-20
SENSOR - DESCRIPTION, ENGINE
COOLANT TEMP......................7-14
SENSOR - DESCRIPTION, EVAPORATOR
TEMPERATURE.................24-17,24-25
SENSOR - DESCRIPTION, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - DESCRIPTION, FUEL
TEMPERATURE......................14-29
SENSOR - DESCRIPTION, HEATED SEAT . . . 8G-4
SENSOR - DESCRIPTION, IN-CAR
TEMPERATURE......................24-19
SENSOR - DESCRIPTION, INLET AIR
TEMPERATURE........................14-29
SENSOR - DESCRIPTION, MANIFOLD AIR
FLOW (MAF)........................14-30
SENSOR - DESCRIPTION, OIL
TEMPERATURE.......................9-56
SENSOR - DESCRIPTION, TEMPERATURE . 24-30
SENSOR - DESCRIPTION,
TRANSMISSION TEMPERATURE........21-140
SENSOR - DESCRIPTION, WATER IN
FUEL..............................14-16
SENSOR - DIAGNOSIS AND TESTING,
BOOST PRESSURE...................14-18
SENSOR - DIAGNOSIS AND TESTING,
EVAPORATOR TEMPERATURE...........24-26
SENSOR - DIAGNOSIS AND TESTING,
HEATED SEAT ........................8G-4
SENSOR - DIAGNOSIS AND TESTING,
IN-CAR TEMPERATURE................24-19
SENSOR - DIAGNOSIS AND TESTING,
TEMPERATURE......................24-30
SENSOR - INSTALLATION, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - INSTALLATION, AMBIENT
TEMPERATURE......................24-16
SENSOR - INSTALLATION, BOOST
PRESSURE.........................14-18
SENSOR - INSTALLATION, CAMSHAFT
POSITION..........................14-19
SENSOR - INSTALLATION, COOLANT
LEVEL..............................7-13
SENSOR - INSTALLATION, CRANKSHAFT
POSITION..........................14-20
SENSOR - INSTALLATION, DOME
LAMP/INTRUSION....................8L-31
SENSOR - INSTALLATION, ENGINE
COOLANT TEMP......................7-15
SENSOR - INSTALLATION, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - INSTALLATION, FRONT
WHEEL SPEED........................5-30
SENSOR - INSTALLATION, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - INSTALLATION, FUEL
TEMPERATURE......................14-29
SENSOR - INSTALLATION, INLET AIR
TEMPERATURE......................14-30
SENSOR - INSTALLATION, INTRUSION
....8Q-2
SENSOR - INSTALLATION, MANIFOLD
AIR FLOW (MAF)
.....................14-31
SENSOR - INSTALLATION, OIL
TEMPERATURE
.......................9-57
SENSOR - INSTALLATION, REAR WHEEL
SPEED
..............................5-31
SENSOR - INSTALLATION,
TEMPERATURE
......................24-30SENSOR - OPERATION, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - OPERATION, AMBIENT
TEMPERATURE......................24-15
SENSOR - OPERATION, BOOST
PRESSURE.........................14-18
SENSOR - OPERATION, CAMSHAFT
POSITION..........................14-19
SENSOR - OPERATION, CRANKSHAFT
POSITION..........................14-20
SENSOR - OPERATION, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - OPERATION, FUEL
TEMPERATURE......................14-29
SENSOR - OPERATION, IN-CAR
TEMPERATURE......................24-19
SENSOR - OPERATION, INLET AIR
TEMPERATURE......................14-29
SENSOR - OPERATION, MANIFOLD AIR
FLOW (MAF)........................14-30
SENSOR - OPERATION, OIL
TEMPERATURE.......................9-56
SENSOR - OPERATION, TEMPERATURE . . . 24-30
SENSOR - OPERATION, TRANSMISSION
TEMPERATURE.....................21-141
SENSOR - OPERATION, WATER IN FUEL . . 14-16
SENSOR - REMOVAL, AIR OUTLET
TEMPERATURE......................24-15
SENSOR - REMOVAL, AMBIENT
TEMPERATURE......................24-15
SENSOR - REMOVAL, BOOST PRESSURE . . 14-18
SENSOR - REMOVAL, CAMSHAFT
POSITION............................14-19
SENSOR - REMOVAL, COOLANT LEVEL....7-13
SENSOR - REMOVAL, CRANKSHAFT
POSITION..........................14-20
SENSOR - REMOVAL, DOME LAMP/
INTRUSION.........................8L-31
SENSOR - REMOVAL, ENGINE COOLANT
TEMP...............................7-14
SENSOR - REMOVAL, EVAPORATOR
TEMPERATURE.................24-18,24-26
SENSOR - REMOVAL, FRONT WHEEL
SPEED..............................5-30
SENSOR - REMOVAL, FUEL LEVEL
SENDING UNIT......................14-15
SENSOR - REMOVAL, FUEL
TEMPERATURE......................14-29
SENSOR - REMOVAL, IN-CAR
TEMPERATURE......................24-19
SENSOR - REMOVAL, INLET AIR
TEMPERATURE......................14-30
SENSOR - REMOVAL, INTRUSION........8Q-2
SENSOR - REMOVAL, MANIFOLD AIR
FLOW (MAF)........................14-31
SENSOR - REMOVAL, OIL
TEMPERATURE.......................9-57
SENSOR - REMOVAL, REAR WHEEL
SPEED..............................5-30
SENSOR - REMOVAL, TEMPERATURE....24-30
SENSOR BULB - INSTALLATION, DOME
LAMP/INTRUSION....................8L-30
SENSOR BULB - REMOVAL, DOME
LAMP/INTRUSION....................8L-30
SENSORS - DESCRIPTION, INPUT SPEED . 21-119
SENSORS - OPERATION, INPUT SPEED . . 21-119
SENTRY KEY REMOTE ENTRY MODULE -
DESCRIPTION........................8Q-2
SENTRY KEY REMOTE ENTRY MODULE -
INSTALLATION.......................8Q-4
SENTRY KEY REMOTE ENTRY MODULE -
OPERATION..........................8Q-3
SENTRY KEY REMOTE ENTRY MODULE -
REMOVAL...........................8Q-3
SEPARATOR - INSTALLATION, OIL........9-50
SEPARATOR - REMOVAL, OIL............9-50
SERVO - DESCRIPTION.................8P-3
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR A SHORT
TO GROUND ON FUSES POWERING . . . 8W-01-8
SHACKLE - INSTALLATION, SPRING.......2-15
SHACKLE - REMOVAL, SPRING..........2-15
SHAFT - DIAGNOSIS AND TESTING,
PROPELLER
...........................3-1
SHAFT - INSTALLATION, INTERMEDIATE
. . . 19-5
SHAFT - INSTALLATION, PROPELLER
.......3-6
SHAFT - REMOVAL, INTERMEDIATE
.......19-5
SHAFT - REMOVAL, PROPELLER
..........3-6SHAFT - SPECIAL TOOLS, PROPELLER.....3-5
SHAFT - SPECIFICATIONS, PROPELLER.....3-5
SHAFT - STANDARD PROCEDURE,
PROPELLER...........................3-3
SHAFT BEARING - INSTALLATION,
OUTPUT...........................21-122
SHAFT BEARING - REMOVAL, OUTPUT . . . 21-122
SHAFT SEAL - INSTALLATION, OUTPUT . . 21-125
SHAFT SEAL - REMOVAL, OUTPUT......21-125
SHAFTS - DUAL REAR WHEELS -
INSTALLATION, AXLE..................3-19
SHAFTS - DUAL REAR WHEELS -
REMOVAL, AXLE......................3-19
SHAFTS - INSTALLATION, AXLE..........3-15
SHAFTS - REMOVAL, AXLE..............3-15
SHIELD - INSTALLATION, REAR SEAT
BACK..............................23-79
SHIELD - REMOVAL, REAR SEAT BACK . . . 23-79
SHIFT MECHANISM - DESCRIPTION.....21-133
SHIFT MECHANISM - INSTALLATION....21-135
SHIFT MECHANISM - OPERATION......21-133
SHIFT MECHANISM - REMOVAL........21-134
SHOCK - DIAGNOSIS AND TESTING.......2-13
SHOCK - DIAGNOSIS AND TESTING,
SPRING.............................2-11
SHOCK - INSTALLATION................2-13
SHOCK - REMOVAL....................2-13
SHORT TO GROUND - STANDARD
PROCEDURE, TESTING FOR A..........8W-01-8
SHORT TO GROUND ON FUSES
POWERING SEVERAL LOADS -
STANDARD PROCEDURE, TESTING
FOR A ...........................8W-01-8
SHUTOFF SOL - DESCRIPTION, HI
PRESSURE FUEL.....................14-16
SHUTOFF SOL - OPERATION, HI
PRESSURE FUEL.....................14-16
SIDE MARKER LAMP BULB -
INSTALLATION, REAR.................8L-21
SIDE MARKER LAMP BULB - REMOVAL,
REAR..............................8L-21
SIDE VIEW MIRROR - GLASS -
INSTALLATION.......................23-49
SIDE VIEW MIRROR - GLASS -
REMOVAL..........................23-49
SIDE VIEW MIRROR - INSTALLATION.....23-48
SIDE VIEW MIRROR - REMOVAL........23-48
SIGNAL INDICATOR - DESCRIPTION,
TURN..............................8J-25
SIGNAL INDICATOR - OPERATION, TURN . . 8J-25
SIGNAL RELAY - INSTALLATION, TURN . . . 8L-24
SIGNAL RELAY - REMOVAL, TURN.......8L-24
SIREN - INSTALLATION................8Q-4
SIREN - REMOVAL....................8Q-4
SLIDE RAIL - INSTALLATION,
TENSIONING.........................9-66
SLIDE RAILS - REMOVAL, TENSIONING....9-61
SLIDING DOOR - ASSEMBLY...........23-43
SLIDING DOOR - DISASSEMBLY.........23-42
SLIDING DOOR - INSTALLATION.........23-44
SLIDING DOOR - REMOVAL............23-41
SOL - DESCRIPTION, HI PRESSURE
FUEL SHUTOFF......................14-16
SOL - OPERATION, HI PRESSURE FUEL
SHUTOFF...........................14-16
SOLENOID - DESCRIPTION............21-136
SOLENOID - DESCRIPTION, FUEL
PRESSURE.........................14-27
SOLENOID - INSTALLATION, FUEL
PRESSURE.........................14-28
SOLENOID - OPERATION..............21-138
SOLENOID - OPERATION, FUEL
PRESSURE.........................14-27
SOLENOID - REMOVAL, FUEL PRESSURE . 14-28
SOLENOID VALVE - DESCRIPTION.......24-27
SOLENOID VALVE - DIAGNOSIS AND
TESTING...........................24-27
SOLENOID VALVE - INSTALLATION.......24-28
SOLENOID VALVE - OPERATION.........24-27
SOLENOID VALVE - REMOVAL..........24-27
SPARE TIRE CARRIER - INSTALLATION . . . 22-10
SPARE TIRE CARRIER - REMOVAL.......22-10
SPEAKER - INSTALLATION
..............8A-2
SPEAKER - REMOVAL
..................8A-2
SPEED CONTROL - DESCRIPTION
........8P-1
SPEED CONTROL - OPERATION
..........8P-1
SPEED SENSOR - INSTALLATION, FRONT
WHEEL
.............................5-30
VAINDEX 15
Description Group-Page Description Group-Page Description Group-Page

SPEED SENSOR - INSTALLATION, REAR
WHEEL.............................5-31
SPEED SENSOR - REMOVAL, FRONT
WHEEL.............................5-30
SPEED SENSOR - REMOVAL, REAR
WHEEL.............................5-30
SPEED SENSORS - DESCRIPTION, INPUT . 21-119
SPEED SENSORS - OPERATION, INPUT . . 21-119
SPEEDOMETER - DESCRIPTION.........8J-23
SPEEDOMETER - OPERATION...........8J-23
SPEEDS - DESCRIPTION, TIRE
PRESSURE FOR HIGH..................22-6
SPLICE INFORMATION - DESCRIPTION,
CONNECTOR, GROUND..............8W-01-5
SPLICING - STANDARD PROCEDURE,
WIRE...........................8W-01-10
SPRING - DESCRIPTION................2-14
SPRING - INSTALLATION................2-8
SPRING - OPERATION..................2-14
SPRING - REMOVAL....................2-7
SPRING AND SHOCK - DIAGNOSIS AND
TESTING............................2-11
SPRING CLAMP PLATES - INSTALLATION . . . 2-8
SPRING CLAMP PLATES - REMOVAL.......2-8
SPRING SHACKLE - INSTALLATION.......2-15
SPRING SHACKLE - REMOVAL...........2-15
SPRING STOP PLATES - INSTALLATION.....2-9
SPRING STOP PLATES - REMOVAL........2-9
SPRINGS - INSTALLATION, VALVE..........9-32
SPRINGS - REMOVAL, VALVE............9-31
SQUEAK & RATTLE - STANDARD
PROCEDURE, BUZZ...................23-10
STABILIZER - INSTALLATION...........23-45
STABILIZER - REMOVAL...............23-45
STABILIZER BAR - DESCRIPTION..........2-9
STABILIZER BAR - INSTALLATION.....2-15,2-9
STABILIZER BAR - OPERATION............2-9
STABILIZER BAR - REMOVAL.........2-15,2-9
STABILIZER LINK - INSTALLATION.....2-16,2-9
STABILIZER LINK - REMOVAL........2-16,2-9
STARTER - DIESEL - TORQUE...........8F-29
STARTER MOTOR - DIAGNOSIS AND
TESTING...........................8F-29
STARTER MOTOR - DIESEL -
SPECIFICATIONS.....................8F-29
STARTER MOTOR - INSTALLATION.......8F-31
STARTER MOTOR - REMOVAL..........8F-30
STARTER MOTOR RELAY - DESCRIPTION . 8F-31
STARTER MOTOR RELAY -
INSTALLATION.......................8F-32
STARTER MOTOR RELAY - REMOVAL.....8F-31
STARTING - STANDARD PROCEDURE,
JUMP................................0-6
STARTING SYSTEM - DESCRIPTION......8F-24
STARTING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-25
STARTING SYSTEM - OPERATION........8F-24
STEERING - DESCRIPTION..............19-1
STEERING - OPERATION................19-1
STEERING COLUMN OPENING COVER -
INSTALLATION.......................23-66
STEERING COLUMN OPENING COVER -
REMOVAL..........................23-66
STEERING FLUID - DESCRIPTION,
POWER..............................0-3
STEERING PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER.......19-12
STEERING PUMP FILL AND BLEED
PROCEDURE, STANDARD PROCEDURE
- POWER...........................19-14
STEERING SYSTEM - DIAGNOSIS AND
TESTING, POWER.....................19-2
STEERING SYSTEM - STANDARD
PROCEDURE, FLUSHING POWER........19-13
STEERING WHEEL - INSTALLATION.......19-7
STEERING WHEEL - REMOVAL...........19-7
STEP - INSTALLATION, REAR BUMPER....13-3
STEP - REMOVAL, REAR BUMPER........13-3
STEPS - INSTALLATION, FRONT BUMPER . . 13-2
STEPS - REMOVAL, FRONT BUMPER......13-2
STEPWELL SCUFF PADS - INSTALLATION
. 23-73
STEPWELL SCUFF PADS - REMOVAL
.....23-72
STOP LAMP BULB - INSTALLATION,
CENTER HIGH MOUNTED
...............8L-7
STOP LAMP BULB - REMOVAL, CENTER
HIGH MOUNTED
......................8L-7
STOP LAMP UN - INSTALLATION,
CENTER HIGH MOUNTED
...............8L-8STOP LAMP UN - REMOVAL, CENTER
HIGH MOUNTED......................8L-8
STOP PLATES - INSTALLATION, SPRING....2-9
STOP PLATES - REMOVAL, SPRING........2-9
STRIKER - INSTALLATION, LATCH.......23-18
STRIKER - INSTALLATION, REAR LATCH . . 23-41
STRIKER - REMOVAL, LATCH...........23-18
STRIKER - REMOVAL, REAR LATCH......23-41
STRUT - INSTALLATION................2-10
STRUT - REMOVAL....................2-10
SUCTION LINE - INSTALLATION.........24-66
SUCTION LINE - REMOVAL.............24-66
SUN VISOR - INSTALLATION...........23-73
SUN VISOR - REMOVAL...............23-73
SUPPLEMENTAL HEATER - DCHA -
DIAGNOSIS AND TESTING, DIESEL.......24-72
SUPPLEMENTAL RESTRAINT
DEPLOYMENT - STANDARD
PROCEDURE, SERVICE AFTER A.........8O-6
SUPPLEMENTAL RESTRAINT SYSTEM -
DIAGNOSIS AND TESTING..............8O-5
SUPPLEMENTAL RESTRAINTS -
STANDARD PROCEDURE, HANDLING
NON-DEPLOYED......................8O-6
SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL...................14-5
SUPPORT BRACKET - INSTALLATION,
REAR VIEW MIRROR.................23-72
SURFACE - STANDARD PROCEDURE,
MEASURE CYLINDER HEAD.............9-21
SUSPENSION, SPECIAL TOOLS - FRONT . . 19-11
SUSPENSION, SPECIAL TOOLS - FRONT....2-2
SWITCH - DESCRIPTION, BLOWER
MOTOR.......................24-17,24-22
SWITCH - DESCRIPTION, DRIVER
HEATED SEAT ........................8G-2
SWITCH - DESCRIPTION, MASTER LOCK . . . 8N-2
SWITCH - DESCRIPTION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - DESCRIPTION, SEAT BELT.....8O-31
SWITCH - DESCRIPTION, WASHER
FLUID LEVEL.........................8R-7
SWITCH - DIAGNOSIS AND TESTING,
BLOWER MOTOR...............24-17,24-23
SWITCH - DIAGNOSIS AND TESTING,
DRIVER HEATED SEAT.................8G-2
SWITCH - DIAGNOSIS AND TESTING,
MASTER LOCK.......................8N-2
SWITCH - DIAGNOSIS AND TESTING,
PASSENGER HEATED SEAT..............8G-5
SWITCH - DIAGNOSIS AND TESTING,
POWER MIRROR.....................8N-3
SWITCH - DIAGNOSIS AND TESTING,
POWER WINDOW.....................8N-5
SWITCH - INSTALLATION...............8P-3
SWITCH - INSTALLATION, BLOWER
MOTOR............................24-23
SWITCH - INSTALLATION, BRAKE LAMP . . . 8L-6
SWITCH - INSTALLATION, DOOR JAMB . . . 8L-31
SWITCH - INSTALLATION, DRIVER
HEATED SEAT ........................8G-3
SWITCH - INSTALLATION, FOG LAMP....8L-12
SWITCH - INSTALLATION, HEADLAMP
LEVELING..........................8L-17
SWITCH - INSTALLATION, HORN.........8H-1
SWITCH - INSTALLATION, MASTER LOCK . . 8N-2
SWITCH - INSTALLATION, MULTI-
FUNCTION..........................8L-20
SWITCH - INSTALLATION, PARK BRAKE . . . 8L-20
SWITCH - INSTALLATION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - INSTALLATION, POWER
MIRROR............................8N-4
SWITCH - INSTALLATION, POWER
WINDOW............................8N-6
SWITCH - OPERATION, BLOWER MOTOR . 24-17,
24-22
SWITCH - OPERATION, DRIVER HEATED
SEAT ...............................8G-2
SWITCH - OPERATION, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - OPERATION, SEAT BELT
.......8O-31
SWITCH - OPERATION, WASHER FLUID
LEVEL
..............................8R-8
SWITCH - REMOVAL
...................8P-3
SWITCH - REMOVAL, BLOWER MOTOR
. . 24-17,
24-23
SWITCH - REMOVAL, BRAKE LAMP
.......8L-6SWITCH - REMOVAL, DOOR JAMB.......8L-31
SWITCH - REMOVAL, DRIVER HEATED
SEAT ...............................8G-3
SWITCH - REMOVAL, FOG LAMP........8L-11
SWITCH - REMOVAL, HEADLAMP
LEVELING..........................8L-16
SWITCH - REMOVAL, HORN.............8H-1
SWITCH - REMOVAL, MASTER LOCK......8N-2
SWITCH - REMOVAL, MULTI-FUNCTION . . . 8L-19
SWITCH - REMOVAL, PARK BRAKE......8L-20
SWITCH - REMOVAL, PASSENGER
HEATED SEAT ........................8G-5
SWITCH - REMOVAL, POWER MIRROR....8N-3
SWITCH - REMOVAL, POWER WINDOW . . . 8N-6
SWITCH BEZEL - INSTALLATION,
ACCESSORY........................23-54
SWITCH BEZEL - REMOVAL, ACCESSORY . 23-54
SYMBOLS - DESCRIPTION,
INTERNATIONAL....................Intro.-2
SYMBOLS - DESCRIPTION,
INTERNATIONAL.......................0-9
TACHOMETER - DESCRIPTION..........8J-23
TACHOMETER - OPERATION............8J-24
TAIL LAMP UNIT - INSTALLATION.......8L-23
TAIL LAMP UNIT - REMOVAL...........8L-23
TAILPIPE - INSTALLATION...............11-3
TAILPIPE - REMOVAL..................11-3
TANK - DESCRIPTION, FUEL............14-12
TANK - INSTALLATION, FUEL...........14-13
TANK - REMOVAL, FUEL...............14-12
TANK MODULE - DESCRIPTION, FUEL....14-13
TANK MODULE - INSTALLATION, FUEL....14-14
TANK MODULE - REMOVAL, FUEL.......14-13
TCM ADAPTATION - STANDARD
PROCEDURE.........................8E-8
TEMP SENSOR - DESCRIPTION, ENGINE
COOLANT............................7-14
TEMP SENSOR - INSTALLATION, ENGINE
COOLANT............................7-15
TEMP SENSOR - REMOVAL, ENGINE
COOLANT............................7-14
TEMPERATURE CONTROL -
DESCRIPTION.......................24-29
TEMPERATURE CONTROL - DIAGNOSIS
AND TESTING.......................24-29
TEMPERATURE CONTROL -
INSTALLATION.......................24-29
TEMPERATURE CONTROL - OPERATION . . 24-29
TEMPERATURE CONTROL - REMOVAL....24-29
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-15
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-15
TEMPERATURE INDICATOR -
DESCRIPTION, AMBIENT...............8J-11
TEMPERATURE INDICATOR -
OPERATION, AMBIENT.................8J-11
TEMPERATURE SENSOR - DESCRIPTION . . 24-30
TEMPERATURE SENSOR - DESCRIPTION,
AIR OUTLET........................24-14
TEMPERATURE SENSOR - DESCRIPTION,
AMBIENT...........................24-15
TEMPERATURE SENSOR - DESCRIPTION,
EVAPORATOR
..................24-17,24-25
TEMPERATURE SENSOR - DESCRIPTION,
FUEL
..............................14-29
TEMPERATURE SENSOR - DESCRIPTION,
IN-CAR
............................24-19
TEMPERATURE SENSOR - DESCRIPTION,
INLET AIR
..........................14-29
TEMPERATURE SENSOR - DESCRIPTION,
OIL
................................9-56
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION
.....................21-140
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING
.......................24-30
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING, EVAPORATOR
...........24-26
TEMPERATURE SENSOR - DIAGNOSIS
AND TESTING, IN-CAR
................24-19
TEMPERATURE SENSOR - INSTALLATION
. 24-30
TEMPERATURE SENSOR -
INSTALLATION, AIR OUTLET
............24-15
TEMPERATURE SENSOR -
INSTALLATION, AMBIENT
..............24-16
TEMPERATURE SENSOR -
INSTALLATION, EVAPORATOR
......24-18,24-26
16 INDEXVA
Description Group-Page Description Group-Page Description Group-Page

TEMPERATURE SENSOR -
INSTALLATION, FUEL.................14-29
TEMPERATURE SENSOR -
INSTALLATION, INLET AIR.............14-30
TEMPERATURE SENSOR -
INSTALLATION, OIL....................9-57
TEMPERATURE SENSOR - OPERATION....24-30
TEMPERATURE SENSOR - OPERATION,
AIR OUTLET........................24-15
TEMPERATURE SENSOR - OPERATION,
AMBIENT...........................24-15
TEMPERATURE SENSOR - OPERATION,
EVAPORATOR..................24-18,24-26
TEMPERATURE SENSOR - OPERATION,
FUEL..............................14-29
TEMPERATURE SENSOR - OPERATION,
IN-CAR............................24-19
TEMPERATURE SENSOR - OPERATION,
INLET AIR..........................14-29
TEMPERATURE SENSOR - OPERATION,
OIL ................................9-56
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION.....................21-141
TEMPERATURE SENSOR - REMOVAL.....24-30
TEMPERATURE SENSOR - REMOVAL,
AIR OUTLET........................24-15
TEMPERATURE SENSOR - REMOVAL,
AMBIENT...........................24-15
TEMPERATURE SENSOR - REMOVAL,
EVAPORATOR..................24-18,24-26
TEMPERATURE SENSOR - REMOVAL,
FUEL..............................14-29
TEMPERATURE SENSOR - REMOVAL,
IN-CAR............................24-19
TEMPERATURE SENSOR - REMOVAL,
INLET AIR..........................14-30
TEMPERATURE SENSOR - REMOVAL,
OIL ................................9-57
TENSIONER - DESCRIPTION, SEAT BELT . . 8O-31
TENSIONER - INSTALLATION, CABLE......5-23
TENSIONER - INSTALLATION, TIMING
CHAIN..............................9-71
TENSIONER - OPERATION, SEAT BELT....8O-32
TENSIONER - REMOVAL, CABLE..........5-23
TENSIONER - REMOVAL, TIMING CHAIN . . . 9-70
TENSIONERS - DESCRIPTION, BELT........7-5
TENSIONERS - OPERATION, BELT..........7-5
TENSIONING AND SLIDE RAIL -
INSTALLATION........................9-66
TENSIONING AND SLIDE RAILS -
REMOVAL...........................9-61
TENSIONING RAIL - INSTALLATION,
TIMING CHAIN.......................9-66
TENSIONING RAIL - REMOVAL, TIMING
CHAIN..............................9-63
TERMINAL - INSTALLATION.........8W-01-10
TERMINAL - REMOVAL..............8W-01-9
TEST - DIAGNOSIS AND TESTING, A/C
PERFORMANCE.......................24-3
TEST - DIAGNOSIS AND TESTING,
FUNCTION...........................24-3
TEST - STANDARD PROCEDURE,
CYLINDER LEAK DOWN.................9-3
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-10
TEST - STANDARD PROCEDURE, LOW
PRESSURE FUEL PUMP................14-3
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-10
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-7
TESTER - STANDARD PROCEDURE,
USING MICRO 420 BATTERY............8F-11
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - DIAGNOSIS AND
TESTING, VEHICLE....................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-1
THERMOSTAT - INSTALLATION, ENGINE
COOLANT
............................7-16
THERMOSTAT - REMOVAL, ENGINE
COOLANT
............................7-15
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM
..............21-27
THREADED HOLE REPAIR -
DESCRIPTION
......................Intro.-5
TIE ROD END - DIAGNOSIS AND
TESTING, OUTER
.....................19-10TIE ROD END - INSTALLATION..........19-11
TIE ROD END - REMOVAL..............19-11
TIME DELAY RELAY - INSTALLATION.....8L-33
TIME DELAY RELAY - REMOVAL.........8L-32
TIMER MODULE - DESCRIPTION,
CENTRAL............................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL....................8E-2
TIMER MODULE - INSTALLATION,
CENTRAL............................8E-2
TIMER MODULE - OPERATION, CENTRAL . . 8E-2
TIMER MODULE - REMOVAL, CENTRAL....8E-2
TIMING CHAIN - INSTALLATION..........9-67
TIMING CHAIN - REMOVAL..............9-63
TIMING CHAIN COVER - INSTALLATION....9-60
TIMING CHAIN COVER - REMOVAL.......9-59
TIMING CHAIN TENSIONER -
INSTALLATION........................9-71
TIMING CHAIN TENSIONER - REMOVAL....9-70
TIMING CHAIN TENSIONING RAIL -
INSTALLATION........................9-66
TIMING CHAIN TENSIONING RAIL -
REMOVAL...........................9-63
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURE................22-3
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE CARRIER - INSTALLATION, SPARE . . . 22-10
TIRE CARRIER - REMOVAL, SPARE......22-10
TIRE INFLATION PRESSURES -
DESCRIPTION........................22-7
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURE FOR HIGH SPEEDS -
DESCRIPTION........................22-6
TIRE ROTATION - STANDARD
PROCEDURE.........................22-5
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-8
TIRES - DESCRIPTION.................22-6
TIRES - DESCRIPTION, RADIAL - PLY.....22-6
TIRES - DESCRIPTION, REPLACEMENT....22-7
TIRES, SPECIFICATIONS...............22-10
TIRE/VEHICLE LEAD - DIAGNOSIS AND
TESTING............................22-8
TO COOLER TUBE - INSTALLATION,
RETURN HOSE FROM GEAR............19-15
TO COOLER TUBE - INSTALLATION,
RETURN LINE FROM PUMP............19-15
TO COOLER TUBE - REMOVAL, RETURN
HOSE FROM GEAR...................19-15
TO COOLER TUBE - REMOVAL, RETURN
LINE FROM PUMP....................19-15
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-8
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR A SHORT . . 8W-01-8
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOE ADJUSTMENT - STANDARD
PROCEDURE.........................2-19
TONE WHEEL - INSTALLATION...........5-31
TONE WHEEL - REMOVAL...............5-31
TOOLS - AUDIO, SPECIAL...............8A-1
TOOLS - BATTERY SYSTEM SPECIAL
TOOLS, SPECIAL......................8F-6
TOOLS - BRAKES, SPECIAL..............5-7
TOOLS - FRONT SUSPENSION, SPECIAL . . 19-11
TOOLS - FRONT SUSPENSION, SPECIAL....2-2
TOOLS - FUEL SYSTEM, SPECIAL........14-5
TOOLS - PARK BRAKE, SPECIAL.........5-23
TOOLS, IGNITION CONTROL - SPECIAL....8I-1
TOOLS, INSTALLATION - SPECIAL........9-14
TOOLS, NAG1 AUTOMATIC
TRANSMISSION - SPECIAL.............21-69
TOOLS, PROPELLER SHAFT - SPECIAL.....3-5
TOOLS, REAR AXLE - SPECIAL...........3-14
TOOLS, SPECIAL TOOLS - BATTERY
SYSTEM SPECIAL.....................8F-6
TOOLS, SPECIFICATIONS - SPECIAL......8F-17
TOP COVER - CLUSTER - INSTALLATION . . 23-62
TOP COVER - CLUSTER - REMOVAL.....23-62
TOP COVER - INSTALLATION
...........23-65
TOP COVER - REMOVAL
...............23-64
TOP COVER - TRAY - INSTALLATION
.....23-64
TOP COVER - TRAY - REMOVAL
.........23-63
TOUCH-UP - DESCRIPTION, PAINT
.......23-74TOUCH-UP - STANDARD PROCEDURE,
PAINT.............................23-75
TOWING - STANDARD PROCEDURE........0-6
TRACK - INSTALLATION, CENTER........23-39
TRACK - REMOVAL, CENTER...........23-38
TRACTION CONTROL INDICATOR -
DESCRIPTION.......................8J-24
TRACTION CONTROL INDICATOR -
OPERATION.........................8J-24
TRACTION CONTROL MALFUNCTION
INDICATOR - DESCRIPTION............8J-25
TRACTION CONTROL MALFUNCTION
INDICATOR - OPERATION..............8J-25
TRAILER HITCH - INSTALLATION........13-10
TRAILER HITCH - REMOVAL.............13-9
TRANSDUCER - DESCRIPTION, A/C
PRESSURE.........................24-13
TRANSDUCER - DIAGNOSIS AND
TESTING, A/C PRESSURE..............24-13
TRANSDUCER - INSTALLATION, A/C
PRESSURE.........................24-14
TRANSDUCER - INSTALLATION, VACUUM . . 11-8
TRANSDUCER - OPERATION, A/C
PRESSURE.........................24-13
TRANSDUCER - REMOVAL, A/C
PRESSURE.........................24-14
TRANSDUCER - REMOVAL, VACUUM......11-7
TRANSMISSION - DIAGNOSIS AND
TESTING, AUTOMATIC............21-23,21-24
TRANSMISSION - INSTALLATION, REAR
CROSSMEMBER......................13-9
TRANSMISSION - NAG1 - DESCRIPTION,
AUTOMATIC..........................21-2
TRANSMISSION - NAG1 - OPERATION,
AUTOMATIC..........................21-4
TRANSMISSION - REMOVAL, REAR
CROSSMEMBER......................13-9
TRANSMISSION - SPECIAL TOOLS,
NAG1 AUTOMATIC....................21-69
TRANSMISSION - SPECIFICATIONS,
NAG1 AUTOMATIC....................21-68
TRANSMISSION CONTROL MODULE -
DESCRIPTION........................8E-5
TRANSMISSION CONTROL MODULE -
OPERATION..........................8E-5
TRANSMISSION FILL - STANDARD
PROCEDURE.......................21-103
TRANSMISSION FLUID - NAG1 -
DESCRIPTION, AUTOMATIC..............0-4
TRANSMISSION FLUID - OPERATION,
AUTOMATIC...........................0-4
TRANSMISSION TEMPERATURE SENSOR
- DESCRIPTION.....................21-140
TRANSMISSION TEMPERATURE SENSOR
- OPERATION.......................21-141
TRANSMITTER - DESCRIPTION, REMOTE
KEYLESS ENTRY......................8N-2
TRANSPONDER KEY - DESCRIPTION......8Q-5
TRANSPONDER KEY - OPERATION........8Q-5
TRAY - DESCRIPTION, BATTERY.........8F-16
TRAY - INSTALLATION, BATTERY........8F-16
TRAY - INSTALLATION, TOP COVER......23-64
TRAY - OPERATION, BATTERY..........8F-16
TRAY - REMOVAL, BATTERY............8F-16
TRAY - REMOVAL, TOP COVER..........23-63
TREAD WEAR INDICATORS - DIAGNOSIS
AND TESTING........................22-8
TRIM - INSTALLATION, A-PILLAR........23-68
TRIM - INSTALLATION, B-PILLAR........23-69
TRIM - INSTALLATION, COWL..........23-70
TRIM - INSTALLATION, D-PILLAR........23-70
TRIM - REMOVAL, A-PILLAR...........23-67
TRIM - REMOVAL, B-PILLAR...........23-68
TRIM - REMOVAL, COWL..............23-70
TRIM - REMOVAL, D-PILLAR...........23-70
TRIM PANEL - INSTALLATION.....23-20,23-35,
23-46
TRIM PANEL - INSTALLATION, BACKLITE
- BULKHEAD........................23-81
TRIM PANEL - INSTALLATION,
BULKHEAD.........................23-69
TRIM PANEL - INSTALLATION, QUARTER . . 23-72
TRIM PANEL - REMOVAL
....23-19,23-35,23-46
TRIM PANEL - REMOVAL, BACKLITE -
BULKHEAD
.........................23-81
TRIM PANEL - REMOVAL, BULKHEAD
....23-69
TRIM PANEL - REMOVAL, QUARTER
.....23-71
TUBE - INSTALLATION, EXHAUST
........24-73
VAINDEX 17
Description Group-Page Description Group-Page Description Group-Page