Page 6 of 223
Downloaded from www.Manualslib.com manuals search engine AXLES - SUSPENSION - STEERING
Wheels and tyres121 - 124
Checking and adjusting the vehicle height125 - 128
Values for checking and adjusting
the axle geometries129 - 133
Front axle134 - 135
Front axle tightening torques136 - 139
Rear axle140 - 141
Rear axle tightening torques142 - 143
Active suspension with variable damping144 - 149
Suspension tightening torques150 - 154
Draining-filling-bleeding
the hydraulic steering/suspension circuit155 - 158
Power steering specifications159 - 162
Power steering tightening torques163 - 164
Checking the steering assistance
pressure (ES9A engine)165 - 168
Bleeding the hydraulic steering
assistance circuit169AIR CONDITIONING
Quantities: aircon system R134.a 203
Special features: air conditioning circuit 204 - 205
Pollen filter206
Checking the compressor oil level207 - 208
Checking the efficiency of
the air conditioning circuit209 - 215
Air conditioning circuit: ES9A216
Air conditioning circuit: DT17217
CONTENTS
BRAKES
Brake specifications170
Braking system: general specifications171 - 173
Braking system: tightening torques174 - 177
Values for checking and adjusting
the braking system178
General feataures of
the electric parking brake179 - 189
Brake fluid checks190
Drain-fill-bleed the braking system191 - 194
HYDRAULICS
Safety requirements:
active suspension with variable damping195 - 197
Suspension spheres: general specifications 198
Suspension spheres:
specification - identification199 - 200
Depressurising the hydraulic
suspension circuit201 - 202
Angl-C6-Index-2005 4/02/05 17:10 Page IV
Page 31 of 223
Downloaded from www.Manualslib.com manuals search engine 25
ENGINE
ENGINE TIGHTENING TORQUES
Exhaust manifold (equipped with a new gasket)
5Pre-tightening(order from 1 to 10)1 ± 0,1Tightening(order from 1 to 10)3 ± 0,3
Con rod caps
6Pre-tightening2 ± 0,2Angular tightening74° ± 5°
Engine flywheel
7Pre-tightening2 ± 0,2Angular tightening60° ± 5° Engine: ES9A
B1JP02LD
Angl-C6-page022-82-2005 4/02/05 17:19 Page 25
Page 41 of 223
Downloaded from www.Manualslib.com manuals search engine 35
ENGINE
ENGINE TIGHTENING TORQUES
Cylinder block
11 Coolant pump 0,9 ± 0,2
Con rod screws
12Pre-tightening2 ± 0,1
Angular pre-tightening 45 ± 5°
Angular tightening45 ± 5°
Starter gearwheel carrier
13Pre-tightening5 ± 0,5
Angular pre-tightening 45 ± 5°Angular tightening45 ± 5°
14 Lower engine block screw (*) 0,9 ± 0,215 Lower engine block screw (*) 2,3 ± 0,3
Bearing cap fixing screws (*)
16Pre-tightening6 ± 0,6
Tightening14,5 ± 1,4
Angular tightening90 ± 20°
Crankshaft bearing cap cover
17Pre-tightening1,5 ± 0,1
Tightening3,3 ± 0,9Angular tightening 47 ± 20°
18 Accessories drive pulley 2,5 ± 0,2
(*) Respect the sequence of tightening.Engine: DT17BTED4
B1DP1M3P
Angl-C6-page022-82-2005 4/02/05 17:19 Page 35
Page 126 of 223
Downloaded from www.Manualslib.com manuals search engine 120
CLUTCH
GEARBOX
TRANSMISSION
TRANSMISSION
Tightening torques (m.daN)Gearbox oil seal mandrels
Vehicle GearboxDriveshaft Driveshaft
Engines
bearing nutRight Left Tool kit
(-).0336.U (-).0336.V
C6 AM6 ES9A - DT17BTED4 2 ± 0,2 34,5 ± 2 8010-T
(-).0336.W (1)
(1) Guide for fitting driveshaft seal.
Tightening torques (m.daN) of the wheel bolts
CITROËNES9Al Steel
DT17BTED4 Alloy9 ± 1
Angl-C6-page101-120-2005 4/02/05 17:25 Page 120
Page 129 of 223
Downloaded from www.Manualslib.com manuals search engine 123
AXLES
SUSPENSION
STEERING
WHEEL AND TYRES(1)Wheel bolt (all rim types)
(2)Light alloy wheel
(3)Steel aluminium wheel
NOTE:If mixed fixing bolts are fitted on steel wheels, the shoulders of the bolts
remain free.
Tightening torques for the wheel bolts.
9 ± 1 m.daN
B2GP00JD
Identification of the wheel bolts
Angl-C6-page121-169-2005 4/02/05 17:31 Page 123
Page 169 of 223
Downloaded from www.Manualslib.com manuals search engine 163
AXLES
SUSPENSION
STEERING
POWER STEERING: TIGHTENING TORQUES
Engines: ES9A - DT17BTED4
1 Steering wheel bolt 3,3 ± 0,52 Upper nuts 2 ± 0,33 Lower nuts 2 ± 0,34 Fixing of steering cardan on valve stem 2 ± 0,35 Union of hydraulic pipe on ram 1,4 ± 0,356 Fixing of supply pipes bracket on distributor valve 0,8 ± 0,17 Fixing of distributor valve on steering mechanism 2 ± 0,28 Steering ball-joint nut 3,5 ± 19 Locking nut for adjustment of steering track rods 5,3 ± 0,810 Fixing of steering rack ball-joint 9,0 ± 0,911 Steering mechanism stud 0,9 ± 0,212 Steering mechanism nut 14 ± 1,4
B3EP17HDB3EP17GD
Steering column
Steering mechanism with integral ram
Angl-C6-page121-169-2005 4/02/05 17:31 Page 163
Page 180 of 223
Downloaded from www.Manualslib.com manuals search engine 174
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Front brakes
1 Front brake disc 1 ± 0,12 Yoke on brake caliper 3 ± 0,23 Unions on brake piping 4 ± 0,54 Front brake caliper 11,5 ± 1
5 Hydraulic valve block on intermediate support
0,8 ± 0,26 Intermediate support on support7 Front wheel sensor 0,8 ± 0,1
B3FP7HNDB3FP7HMD
B3FP7HPD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 174
Page 182 of 223
Downloaded from www.Manualslib.com manuals search engine 176
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Rear brakes
11 Rear brake caliper 3,5 ± 0,312 Unions on brake piping 1,5 ± 0,113 Rear brake caliper support 10,8 ± 114 Rear wheel sensor 0,8 ± 0,1
B3FP7HTDB3FP7HSD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 176
