Downloaded from www.Manualslib.com manuals search engine 65
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: DT17BTED4
Reposition the timimg belt, strip «j»well tensioned, in the following order:
- Guide roller (19).
- Camshaft pulley (18).
- Guide roller (16).
- Camshaft pulley (23).
- Tensioner roller (20).
NOTE:If necessary, turn the pulleys (23)and (18)slightly anti-clockwise (the offset must not be
more than one tooth).
Remove the tool [4].
Using a hexagonal spanner, rotate the tensioner roller (20)anti-clockwise.
Position the index "l"facing the notch "k".
Tighten the screw (21) : 2,5 ± 0,2.
Remove the screws (15)and (17)from the pulleys (23)and (18)in order to check that the screws
(15)and (17)are not at the end of slots.
IMPERATIVE: If the screws (15) and (17) are at the end of slots, restart the operations to refit
the timing belt.
B1EP1JHDB1EP1JJC
Angl-C6-page022-82-2005 4/02/05 17:19 Page 65
