2005 CITROEN C6 window

Downloaded from www.Manualslib.com manuals search engine 8
GENERAL
OPERATIONS TO BE CARRIED OUT BEFORE AND AFTER A DISCONNECTION OF THE BATTERY
Before reconnecting the battery
.
Doors and tailgate.
WARNING: Before disconnecting the battery, partially open the door
windows.
Automatic gearbox.
If the vehicle has to remain stationary: Pplace the gear lever in the parking
position "P".
If the vehicle has to be moved: Place the gear lever in the neutral position
"N".
Electric parking brake.
If the vehicle has to remain stationary: Activate the electric parking brake.
If the vehicle has to be moved: Deactivate the electric parking brake.
Features of the vehicle's electrical supply.
When the boot is closed and the battery is disconnected, it is possible to
supply the vehicle by connecting another battery or a 12Vexterior supply.
Operations to be performed:
- Link the earth of the exterior supply to the vehicle earth.
- Link the 12Vof the exterior supply to the positive terminal of the battery +
unit, in the front left hand side of the engine compartment.
After reconnecting the battery
.
Antiscanning function.
It is necessary to wait 1 minuteafter reconnecting the battery in order to be
able to restart the vehicle.
Electric windows.
It may be necessary to re-initialise the sequential and anti-pinch functions.NOTE:If the window is open at the time the battery is reconnected, action
the window switch several times to close it, then re-initialise.
Open the window fully.
Action and release the window switch until the window is completely closed.
NOTE:This operation has to be carried out on each electric window.
Sun roof.
The anti-pinch function has to be re-initialised.
Place the sun roof switch in the maximum tilt position.
Keep the sun roof switch pressed until the sun roof ceases its movement.
Release the sun roof switch.
Press the sun roof switch within 5 seconds.
Keep the sun roof switch pressed until the end of the sun roof opening
sequence.
Multifunction screen.
It is necessary to adjust the date, time and outside temperature.
Adjust the display language of the multifunction screen if necessary.
NOTE:The default display language of the multifunction screen is French.
Reconfigure the personalisation menu of the multifunction screen.
Radio.
Reprogramme the radio stations.
Telematic control unit (RT3 radiotelephone).
Reprogramme the radio stations.
Navigation.
Warning: the vehicle has to be out in the open (when you switch on
the ignition, the navigation ECU searches for satellites).
Reprogramme the customer parameters.
Angl-C6-page001-21-2005 4/02/05 17:12 Page 8

Downloaded from www.Manualslib.com manuals search engine 61
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: DT17BTED4
Tools.
[1] Kit of plugs: (-).0188-T
[2]Flywheel setting peg (double damping flywheel): (-).0195.K Toolkit 0188-T
[3]Camshaft setting pegs: (-).0195.H Toolkit 0188-T
[4]Belt compressure spring: (-).0188.K
[5]Coolant pump pulley peg: (-).0195.C
[6]Lifting bracket: (-).0195.N
IMPERATIVE: Respect the safety and cleanliness requirements.
WARNING: Before disconnectng the battery, partially open the door windows.
Removing.
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure Diesel injection (HDi) engines.
Remove the engine cover.
Disconnect the negative terminal of the battery.
Raise and support the front of the vehicle.
Remove:
- The under-engine sound-deadening.
- The front RH wheel.
- The front RH splash-shield (see corresponding operation).
Angl-C6-page022-82-2005 4/02/05 17:19 Page 61

Downloaded from www.Manualslib.com manuals search engine 183
BRAKES
ELECTRIC PARKING BRAKE SYSTEMRemoving-refitting the electric parking brake system.
IMPERATIVE: Respect the safety and cleanliness requirements.
WARNING: Before disconnecting the battery, partially open the door windows.
Removing.
IMPERATIVE: Disconnect the battery prior to operating on the parking brake cables.
IMPERATIVE: Perform a manual unlocking of the parking brake, using the handle located in
the central armrest, before operating on the parking brake cables.
Disconnect the battery.
Raise and support the vehicle, wheels hanging.
Remove the central console (1)(see corresponding operation).
Uncouple the handle (2)from the manual unlocking cable of the electric parking brake.
Remove:
- The exhaust line (4) (ES9A engine).
- The protection (5).
- The protection (3).
C5FP0VVDB1JP08XD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 183

Downloaded from www.Manualslib.com manuals search engine 186
BRAKES
B3FP7HXD
ELECTRIC PARKING BRAKE CABLESRemoving-refitting the parking brake cables.
IMPERATIVE: Respect the safety and cleanliness requirements.
WARNING: Before disconnecting the battery, partially open the door windows.
Removing.
IMPERATIVE: Disconnect the battery prior to operating on the parking brake cables.
IMPERATIVE: Perform a manual unlocking of the parking brake, using the handle located in
the central armrest, before operating on the parking brake cables.
Disconnect the battery.
Raise and support the vehicle, wheels hanging.
IMPERATIVE: Do not introduce any foreign body into the electric parking brake system.
Remove the electric parking brake system(see corresponding operation).
"a"connector
(1)electric parking brake system (FSE)
(2)manual unlocking cable
Undo the nuts (3).
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 186