Downloaded from www.Manualslib.com manuals search engine IDENTIFICATION OF VEHICLES
E1AP13LD
A- Chassis stamp
(cold stamp on suspension leg).
B - Chassis stamp
(cold stamp on bodywork below rear screen).
C - Manufacturer's data plate
(on the LH centre pillar).
D - AS/RP No. and RP paint code
(label on front pillar close to driver's door).
E - Inflation pressures and tyre references
(label on front pillar close to driver's door).
F - Serial no. on bodywork.
G - Gearbox reference - Factory serial no.
H - Engine legislation type - Factory serial no.
GENERAL
Angl-C6-page001-21-2005 4/02/05 17:12 Page 1
Downloaded from www.Manualslib.com manuals search engine 122
AXLES
SUSPENSION
STEERING
WHEEL AND TYRESNOTE:The label indicating the recommended tyre pressures is affixed to the front
LH door pillar.
«a»Recommended tyre inflation pressures (empty and under load)
«b»Tyre specifications
«c»Type of tyres
«d»Recommended inflation pressure for the spare wheel
B2GP01FD
Identification of inflation pressures
Angl-C6-page121-169-2005 4/02/05 17:31 Page 122
