2005 CITROEN C6 torque

Downloaded from www.Manualslib.com manuals search engine 175
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Braking amplifier
8 Braking amplifier on support
9 Support on bulkhead 2,1 ± 0,3
10 Master-cylinder
B3FP7HRDB3FP7HQD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 175

Downloaded from www.Manualslib.com manuals search engine 176
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
Rear brakes
11 Rear brake caliper 3,5 ± 0,312 Unions on brake piping 1,5 ± 0,113 Rear brake caliper support 10,8 ± 114 Rear wheel sensor 0,8 ± 0,1
B3FP7HTDB3FP7HSD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 176

Downloaded from www.Manualslib.com manuals search engine 177
BRAKES
TIGHTENING TORQUES: BRAKING SYSTEM
15 Electric parking brake system (FSE) 0,4 ± 0,0616 Nut for parking brake cables 6 ± 0,617 Gyrometer/accelerometer sensor on support 0,9 ± 0,118 Sensor support on body 0,4 ± 0,06
B3FP7HVDB3FP7HUD
Parking brake
Gyrometer/accelerometer sensor
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 177

Downloaded from www.Manualslib.com manuals search engine 200
HYDRAULICS
SUSPENSION SPHERES: SPECIFICATION - IDENTIFICATION
Stiffness regulator accumulators (front).
NOTE:The dampers are integral to the hydractive regulator.
Engine version Suspension sphere marking Pressure rating (bars)
ES9A
KR 70
DT17BTED4
Stiffness regulator accumulators (rear).
NOTE:The dampers are integral to the hydractive regulator.
Engine version Suspension sphere marking Pressure rating (bars)
ES9A
KS 40
DT17BTED4
The suspension cylinders on the same axle have to be equipped with the same type of suspension accumulators.
IMPORTANT: Tightening torque for the suspension accumulators : 2,7 ± 0,5 m.daN.
Angl-C6-page195-202-2005 4/02/05 17:36 Page 200

Downloaded from www.Manualslib.com manuals search engine 205
AIR
CONDITIONING
SPECIAL FEATURES: AIR CONDITIONING SYSTEM
Tightening
Requirements for fitting the inlet and outlet brackets:
- Aircon compressor.
- Aircon condenser.
- Aircon pressure reducer valve.
IMPERATIVE: Assembly requirement: the bracket(s) «f» must be against
their interface(s) before the nut(s) are tightened.
IMPERATIVE: Respect the tightening torques.
C5HP1CWC
Angl-C6-page203-217-2005 4/02/05 17:40 Page 205

Downloaded from www.Manualslib.com manuals search engine 216
AIR
CONDITIONING
Tightening torques (m.daN).
(1)High pressure valve
(2)Low pressure valve
(3)Pressure reducer
(4)Pressure reducer outlet, tighten to: 0,6
(5)Pressure reducer inlet, tighten to: 0,6
(6)Clickfit union, tool: 8005-T.A Black
(7) Compressor inlet, tighten to: 0,7
(8)Compressor outlet, tighten to: 0,7
(9)Filtering cartridge: Not interchangeable
(10)Condenser outlet, tighten to: 0,6
(11)Pressostat, tighten to: 0,6
(12)Condenser inlet, tighten to: 0,6
(13)Buffer capacity
«a»Compressor front support: 3,9
«b»Compressor rear support: 2,5
C5HP1E0P
AIR CONDITIONING SYSTEM R.134.a
Engine: ES9A
Angl-C6-page203-217-2005 4/02/05 17:40 Page 216

Downloaded from www.Manualslib.com manuals search engine 217
AIR
CONDITIONING
Tightening torques (m.daN).
(1)High pressure valve
(2)Low pressure valve
(3)Pressure reducer
(4)Pressure reducer outlet, tighten to: 0,6
(5)Pressure reducer inlet, tighten to: 0,6
(6)Clickfit union, tool: 8005-T.A Black
(7)Compressor inlet, tighten to: 0,7
(8)Compressor outlet, tighten to: 0,7
(9)Filtering cartridge: Not interchangeable
(10)Condenser outlet, tighten to: 0,6
(11)Pressostat, tighten to: 0,6
(12)Condenser inlet, tighten to: 0,6
(13)Buffer capacity
«a»Compressor front support: 3,9
«b»Compressor rear support: 2,5
AIR CONDITIONING SYSTEM R.134.a
C5HP1DRP
Engine: DT17BTED4
Angl-C6-page203-217-2005 4/02/05 17:40 Page 217