Downloaded from www.Manualslib.com manuals search engine 185
BRAKES
ELECTRIC PARKING BRAKE SYSTEMSlacken the nuts (7).
Remove the electric parking brake system assembly.
Refitting.
Refit the electric parking brake system assembly.
Tighten the nuts(7) : 0,4 ± 0,1 m.daN.
Attach the brake cables on their attachments on the bodywork.
Clip the parking brake cable, at "a"(on each side).
Couple the parking brake cable (6)on the brake caliper (on each side).
IMPERATIVE: Position the shim (8) (thickness 3 mm)at "c" (on each side).
Engage the manual unlocking cable of the electric parking brake in its location at "b".
Couple the handle (2)to the parking brake cable.
Refit the central console (1)(see corresponding operation).
Refit:
- The protections (5)and (3).
- The exhaust line (4) (ES9A engine).
Reconnect the battery.
Apply and release the electric parking brake.
Check the functioning of the electric parking brake.
NOTE:Remove the shim (8)from the brake calipers.
IMPERATIVE: Perform the operations that are necessary following a reconnection of the battery
(see corresponding operation).
B3FP7HKDB3FP7HLD
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 185
