2005 CHEVROLET VENTURE Owners Manual

Page 97 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual Keys...............................................................2-3
Remote Keyless Entry System.........................2-4
Remote Keyless Entry System Operation...........2-5
Doors and Locks......

Page 98 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual Storage Areas................................................2-47
Glove Box...................................................2-47
Cupholder(s)................................................2-48
Over

Page 99 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual Keys
{CAUTION:
Leaving children in a vehicle with the ignition
key is dangerous for many reasons. They
could operate the power windows or other
controls or even make the vehicle move. The
children or

Page 100 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual Your vehicle’s key can be used for the ignition as well
as the driver’s door lock and storage compartments.
If you need a new key, contact your dealer, who
can obtain the correct key code.
Your ve

Page 101 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual At times you may notice a decrease in range. This is
normal for any remote keyless entry system. If the
transmitter does not work or if you have to stand closer
to your vehicle for the transmitter to

Page 102 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual When you use your remote keyless entry transmitter to
unlock your vehicle or to operate the power sliding
door(s), the parking lamps will �ash to let you know the
command was received.
If you would li

Page 103 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual You can operate the power sliding door(s) with the
remote keyless entry transmitter only when the power
sliding door override switch(es) on the overhead console
is turned off. SeePower Sliding Door (P

Page 104 of 470

CHEVROLET VENTURE 2005 1.G Owners Manual 2. Gently pry the battery out of the transmitter. Do not
use the metal �anges to pop out the battery.
3. Replace the battery.
4. Reassemble the transmitter. Make sure the halves
are snapped together t