Page 3546 of 3870
Fig. 9: Checking Armature Coil Ground Test
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2004 Mitsubishi Endeavor Limited
2004 STARTING & CHARGING SYSTEMS Starters - Endeavor
Page 3547 of 3870
Fig. 10: Checking Armature Coil Open Circuit
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOVAL & INSTALLATION
OVERHAUL NOTE: Information is not available from manufacturer.
NOTE: To assist in overhaul use illustration. See Fig. 11
.
2004 Mitsubishi Endeavor Limited
2004 STARTING & CHARGING SYSTEMS Starters - Endeavor
Page 3550 of 3870
Fig. 13: Removing Snap Ring
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
Cleaning Overrunning clutch is pre-lubricated at the factory and solvent will wash lubrication
from clutch. The drive unit may be cleaned with a brush moistened with cleaning
solvent and wiped dry with a cloth. Reassembl
y (Sna
p & Sto
p Rin
g)
CAUTION: Do not immerse drive unit and parts in cleaning
solvent. Immersing the yoke and field coil assembly
and/or armature will damage insulation. Wipe these
parts with a cloth only.
2004 Mitsubishi Endeavor Limited
2004 STARTING & CHARGING SYSTEMS Starters - Endeavor