Page 3070 of 3870
Fig. 29: Removing & Installing Stabilizer Bar
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT >>A<< STABILIZER BAR/STABILIZER BUSHING/STABILIZER BAR BRACKET INSTALLATION 1. Position the stabilizer bar identification
paint to the left side.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3075 of 3870
Fig. 33: Removing & Installing Rear Suspension Crossmember (FWD)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOVAL SERVICE POINTS << A>> REAR ABS SENSOR REMOVAL < VEHICLES WITH ABS> The rear ABS sensor can be damaged during service work. Unclamp the rear ABS
sensor cable as shown, and tie it out of the wa
y.
CAUTION: For vehicles with ABS, be careful when handling the
pole piece at the tip of the ABS sensor so as not to
damage it by striking against other parts.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3078 of 3870
Fig. 36: Removing Crossmember Stay
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINTS >>A<< CROSSMEMBER STAY INSTALLATION Install the crossmember stay with its arrow facing the front of vehicle.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3081 of 3870
Fig. 39: Removing & Installing Rear Suspension Crossmember (AWD)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOVAL SERVICE POINTS << A>> REAR ABS SENSOR REMOVAL < VEHICLES WITH ABS>
CAUTION: For vehicles with ABS, be careful when handling the
pole piece at the tip of the ABS sensor so as not to
damage it by striking against other parts.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3082 of 3870
The rear ABS sensor can be damaged during service work. Unclamp the rear ABS
sensor cable as shown, and tie it out of the way.
Fig. 40: Removing Rear ABS Sensor
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
<< B>> SHOCK ABSORBER ASSEMBLY/TRAILING ARM ASSEMBLY AND KNUCKLE CONNECTION < TEMPORARY
ASSEMBLING> After removing the driveshaft, assemble the knuckle and shock absorber assembly
and the trailin
g arm assembl
y tem
poraril
y to su
pport the knuckle.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3084 of 3870
Fig. 42: Crossmember Stay Removal
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT >>A<< CROSSMEMBER STAY/CROSSMEMBER NUT INSTALLATION Ensure that the crossmember mounting bolts have been tightened to 90 - 110 N.m (67 - 81 f
t-lb
), and then install the crossmember sta
y with the crossmember nut.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3087 of 3870
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
.
SERVICE SPECIFICATIONS Fig. 46: Identifying Service Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
LUBRICANT Fig. 47: Identifying Lubricant Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor
Page 3088 of 3870
2004 BODY & ACCESSORIES
Front & Rear Seat Assembly - Endeavor
FRONT SEAT ASSEMBLY REMOVAL AND INSTALLATION Post-installation Operation
Adjustment Procedures of Special Function (refer to AIR BAG RESTRAINT SYSTEMS
.
WARNING:
Before removing the front seat assembly, refer
to SERVICE PRECAUTIONS and AIR BAG RESTRAINT SYSTEMS
.
When removing and installing the front
passenger seat, be sure to carry out accuracy
check occupant classification sensor after the
seat has been installed in the vehicle. (Refer to
AIR BAG RESTRAINT SYSTEMS
.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Front & Rear Seat Assembly - Endeavor
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Front & Rear Seat Assembly - Endeavor
