2004 MITSUBISHI ENDEAVOR weight

MB990211: Slide Hammer REMOVAL SERVICE POINTS <> DRIVE SHAFT NUT REMOVAL Use special tool MB990767 to fix the hub and remove the drive shaft nut.
Fig. 18: Removing Shaft Nut

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CAUTION: Do not apply pressure to the wheel bearing by the
vehicle weight to avoid possible damage when the
drive shaft nut is loosened.

2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

MB990998: Front Hub Remover and Installer REMOVAL SERVICE POINTS <> DRIVE SHAFT NUT REMOVAL Use special tool MB990767 to fix the hub and remove the drive shaft nut.
Fig. 29: Removing Drive Shaft Nut

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CAUTION: Do not apply pressure to wheel bearing by the
vehicle weight to avoid possible damage to wheel
bearing before tightening drive shaft nut fully.

2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

2. Use special tools MB991721, MB991833 and MB991961 to remove the drive
shaft from the differential carrier.
Fig. 31: Removing Drive Shaft From Differential Carrier

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CAUTION: Do not apply pressure to the wheel bearing by the
vehicle weight to avoid possible damage when the
drive shaft is removed. If, however, vehicle weight
must be applied to the bearing in moving the vehicle,
temporarily secure the wheel bearing by using the
special tools MB991000 (Spacer belongs to
MB990998) and MB991017.

2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

Fig. 32: Identifying Special Tools

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINTS >>A<< DRIVE SHAFT INSTALLATION
>>B< CAUTION: When installing the drive shaft, be careful that the
spline part of the drive shaft does not damage the oil
seal.
CAUTION: Do not apply pressure to wheel bearing by the
vehicle weight to avoid possible damage to wheel
bearing before tightening drive shaft nut fully.

2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

2004 SUSPENSION
Rear - Endeavor
GENERAL DESCRIPTION Low-mount multilink independent suspension offers handling stability and riding
comfort comparable to passenger cars. Crossmembers with an elastic structure are
used to reduce road noise, making the vehicle quieter.
The arrangement of the arms, coil springs, and shock absorbers is designed to
provide a wide luggage space.
The differential case is mounted on the crossmember in AWD models to reduce the
weight under the springs and improve the suspension tracking of the road surface. CONSTRUCTION DIAGRAM Fig. 1: Rear Suspension Construction Diagram (FWD)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor


2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

1. Temporarily tighten the nuts in mounting locations shown in the illustration
with no weight on the front seat cushion and check the operation of the seat
slide.
Fig. 2: Installing Front Seat
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Front & Rear Seat Assembly - Endeavor

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
.
2. Temporarily tighten the bolts in mounting locations shown in the illustration
with no weight on the front seat cushion.
3. Tighten the nuts and bolts in all mounting locations to the specified torque.
INSPECTION HEATED SEAT SWITCH CHECK CONTINUITY TEST OF HEATED SEAT SWITCH 1. Check for continuity between terminals.
Fig. 3: Identifying Heated Seat Switch Terminals

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Front & Rear Seat Assembly - Endeavor