2004 MITSUBISHI ENDEAVOR suspension

The rear ABS sensor can be damaged during service work. Unclamp the rear ABS
sensor cable as shown, and tie it out of the way.
Fig. 40: Removing Rear ABS Sensor

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
<< B>> SHOCK ABSORBER ASSEMBLY/TRAILING ARM ASSEMBLY AND KNUCKLE CONNECTION < TEMPORARY
ASSEMBLING> After removing the driveshaft, assemble the knuckle and shock absorber assembly
and the trailin
g arm assembl
y tem
poraril
y to su
pport the knuckle.

2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

Fig. 41: Supporting Knuckle

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
<< C>> CROSSMEMBER STAY REMOVAL The crossmember mounting bolts need not be unscrewed when the crossmember
stay is replaced. However, the bolts may be loose while the crossmember stay is
removed. It is recommended that you should retighten the bolts to 100 +/- 10 N.m (74 +
/- 7 f
t-lb
).

2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

Fig. 42: Crossmember Stay Removal

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSTALLATION SERVICE POINT >>A<< CROSSMEMBER STAY/CROSSMEMBER NUT INSTALLATION Ensure that the crossmember mounting bolts have been tightened to 90 - 110 N.m (67 - 81 f
t-lb
), and then install the crossmember sta
y with the crossmember nut.

2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

Fig. 43: Installing Crossmember Stay/Nut

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
INSPECTION
Check the crossmember for cracks or deformation. Check all bolts for condition and straightness.
SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

Fig. 44: Identifying Fastener Tightening Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
GENERAL SPECIFICATIONS COIL SPRING Fig. 45: Identifying General Specifications
2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
.
SERVICE SPECIFICATIONS Fig. 46: Identifying Service Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
LUBRICANT Fig. 47: Identifying Lubricant Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

2004 Mitsubishi Endeavor LS 2004 SUSPENSION Rear - Endeavor

A whining sound is caused by the TCL/ASC hydraulic unit motor. When pressure is applied to the brake pedal, the pulsation of the pedal causes a
scraping sound. When the brakes are applied firmly, the TCL/ASC operates, rapidly applying
and releasing the brakes many times per second. This repeated application and
release of braking forces can cause the suspension to make a thumping sound
and the tires to squeak.
SENSOR G AND YAW RATE SENSOR This sensor is mounted under the center console, and detects lateral acceleration,
longitudinal acceleration and steering angular velocity of the vehicle.
Fig. 3: Identifying G And Yaw Rate Sensor
2004 Mitsubishi Endeavor LS
2004 BRAKES Traction Control, Active Skid Control System - Endeavor

Fig. 39: Steering Wheel Sensor DTC Chart

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
DIAGNOSTIC TROUBLE CODE DEFINITIONS DIAGNOSTIC TROUBLE CODE DEFINITIONS DTC
Description
DTC C1200, DTC C1205, DTC C1210, DTC C1215
FR WHEEL SPD. SNSR.
MALFUNCTION, FL WHEEL SPD.
SNSR. MALFUNCTION, RR
WHEEL SPD. SNSR.
MALFUNCTION, RL WHEEL SPD.
SNSR. MALFUNCTION
DTC C1201, DTC C1206, DTC C1211, DTC C1216
FR WHEEL SPD. SNSR. INVALID
SIGNAL, FL WHEEL SPD. SNSR.
INVALID SIGNAL, RR WHEEL
SPD. SNSR. INVALID SIGNAL, RL
WHEEL SPD. SNSR. INVALID
SIGNAL
DTC C1223
SUSPENSION OF SNSR. ACTIVE
CHECK
DTC C1226, DTC C1231, DTC C1236, DTC C1241, DTC C1246, DTC C1251, DTC C1256, DTC
FR INLET VALVE, FR OUTLET
VALVE, FL INLET VALVE, FL
OUTLET VALVE, RR INLET

2004 Mitsubishi Endeavor LS
2004 BRAKES Traction Control, Active Skid Control System - Endeavor