Page 1674 of 3870
Fig. 45: Identifying Connector C
-303 C
-311
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Is remote controlled radio switch (LH) connector C-311 and clock
spring connector C-303 in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. The remote controlled radio switch
(LH) should work normally.
STEP 3. Check the wirin
g harness between remote controlled radio switch
connector C-311 (terminals1 and 2) and clock spring connector C-303
(terminals 4 and 5).
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1675 of 3870
Fig. 46: Identifying Connector C
-303 C
-311
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Are the wiring harness between remote controlled radio switch
connector C-311 (terminals 1 and 2) and clock spring connector C-303
(terminals 4 and 5) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The remote controlled radio switch (LH)
should work normally.
INSPECTION PROCEDURE 5: No Sound. < Vehicles with Audio Amplifier >.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1680 of 3870
Fig. 50: Identifying Connector C
-11
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Is audio amplifier connector C-11 in good condition?
YES: Go to Step 3.
NO: Repair or replace the damaged component(s). The speakers should
sound.
STEP 3. Check the wiring harness between audio amplifier connector C-
11 (terminal 6 and 16) and the battery.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1683 of 3870
Fig. 52: Identifying Connector C
-31
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Is the wiring harness between audio amplifier connector C-11
(terminal 6 and 16) and the battery in good condition?
YES: There is no action to be taken.
NO: Repair the wiring harness. The speakers should sound.
STEP 4. Measure the resistance at audio amplifier connector C-11 in
order to check the ground circuit to the audio amplifier.
1. Disconnect audio amplifier connector C-11, and measure at the wiring
harness side.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1685 of 3870
STEP 5. Check audio amplifier connector C-11 for loose, corroded or
damaged terminals, or terminals pushed back in the connector.
Fig. 55: Identifying Connector C
-11
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Is audio amplifier connector C-11 in good condition?
YES: Go to Step 6.
NO: Repair or replace the damaged component(s). The speakers should
sound.
STEP 6. Check the wiring harness between audio amplifier connector C-
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1686 of 3870
11 (terminal 7 and 17) and ground
.
Q: Is the wiring harness between audio amplifier connector C-11
(terminal 7 and 17) and ground in good condition?
YES: There is no action to be taken.
NO: Repair the wiring harness. The speakers should sound.
Fig. 56: Identifying Connector C-11
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
STEP 7. Check radio, CD player and CD changer connector C-113 and
aud
io amplifi
er conn
ecto
r C-12 f
or loose,
corroded
or da
maged
termin
als,
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1689 of 3870
Fig. 57: Identifying Connector C
-12 , C
-113
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Are radio, CD player and CD changer connector C-113 and audio
amplifier connector C-12 in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). The door speaker (LH)
should sound.
STEP 8. Check the wiring harness between CD player and CD changer
connector C-113 (terminals 31, 32, 33, 34, 40 and 41) and audio amplifier
connector G-19 (terminals 22, 23, 24, 30 and 31).
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
Page 1696 of 3870
Fig. 63: Identifying Connector C
-126
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Q: Are harness connectors C-126 and C-105 in good condition?
YES: Go to Step 4.
NO: Repair or replace the damaged component(s). The tweeter (LH)
should sound.
STEP 4. Check the wiring harness between tweeter (LH) connector C-126
(terminals 1 and 2) and radio and CD player connector C-105 (terminals
15 and 23).
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Radio With Tape Player & Cd Player - Endeavor
