2004 MERCEDES-BENZ C-Class Comand Manual

50 AudioCD operationMain CD menu 1CD function with the number of the ma-
gazine slot currently playing
2Track number and elapsed playback
time will appear. Also, the name of the
CD will appear here, see “Naming a
CD” (
page 55)
3Scan function and menu fields

Press d.
The main CD menu will appear.
Playback begins if a CD was inserted in
one of the playback locations.
Playback locations are
CD 0 CD drive
CD 1 - CD 6 magazine slot 1 to 6 in
the CD changer*
CD drive
Playback will begin with the first
track on the CD.

CD changer*
The CD changer* searches for in-
serted CDs in magazine slots 1 to 6
and plays the first track on the first
CD detected.After the magazine was changed
The message “Loading CD ...” appears if
the CD changer* was used last.
Error messages (
page 60).

Press any system key, e.g. c.
COMAND will switch to radio operati-
on.
Switching on
P82.85-9098-31
1
2
3
iIf you switch on CD mode, COMAND will
check which playback unit (CD drive or
CD changer*) was used last.
If there is no CD in one of the units,
COMAND automatically switches to the
unit with CD.Switching another system on

51 Audio
CD operation
You can select a track
with the rocker switch g/h

with the number keypad

in the “CD Select” menuWith the rocker switch g/h
Next track

Press h briefly.
Previous track or start of title (if more than
9 seconds of playing time has elapsed)

Press g briefly.
Select any desired track

Press g/h as often as
necessary.With the number keypad

Press t and enter the number of the
track you wish to select, e.g. 2.
Track select
P82.85-9099-31
iIf you enter a two-digit number, you
must enter the second number within 3
seconds. Otherwise the system will
switch to the track of the first number
entered.
P82.85-9100-31

52 AudioCD operation
You will hear the selected track 
automatically after 3 seconds

if you press t.
The new track number will appear in
the main CD menu.In the “CD Select” menu

Turn the right-hand rotary/push-button
v to highlight “CD Select” in the main
CD menu and press to confirm.
The “CD Select” menu will appear.

Press t and the number key for the
track you wish to select, e.g. 2.
You will hear the track you have chosen
automatically after 3 seconds

if you press t.
The main CD menu with the new track
number will appear.
P82.85-9101-31

53 Audio
CD operation
You can select a CD
with the number keypad

in the “CD Select” menuWith the number keypad

Press a number key, e.g. 2 to select
the corresponding CD.
The message “Loading CD ...” will ap-
pear if the selected magazine slot is
loaded.
Key 0 CD drive
Keys 1 - 6 magazine slots 1 to 6 of
the CD changer*
No CD has been inserted:
COMAND will show the messages

“CD drive: No CD” or

“CD changer: No CD”.In the “CD Select” menu
1Current track and the name of the CD
playing if this was entered previously
(
page 55)
2Current CD in red color
3Magazine slots contains a CD
Position 0: CD drive
Position 1-6: magazine slots in the CD
changer*
4Magazine slot does not contain a CD
Selecting a CD
P82.85-9102-31
iIf it is not possible to play a CD selected
from the CD drive (message: “Error”),
COMAND will automatically load the
next CD in the magazine.
Other error messages (
page 60).
P82.85-9103-31
1
2
34

54 AudioCD operation
Turn the right-hand rotary/push-button
v to highlight “CD Select” in the main
CD menu and press to confirm.
The “CD Select” menu will appear.

Turn the right-hand rotary/push-button
v to highlight the desired CD and
press to confirm.
The message “Loading CD ...” will ap-
pear in 1. Playback will then begin
with track 1, the main CD menu will ap-
pear.
Fast forward

Press h longer than 2 seconds and
keep it depressed.
The message “Forward S” will appear.
The display shows the current position
via the time indicator display.Fast reverse

Press g longer than 2 seconds and
keep it depressed.
The message “T Reverse” will appear.
Ending the function

Releaseg or h.
Playback will resume.
iIf magazine slots are empty, it is not
possible to select them with the right-
hand rotary/push-button v.
If you select an empty magazine slot
with a number key, e.g. 4 the message
“No CD” is displayed.
Fast forward/reverse
P82.85-9104-31

55 Audio
CD operation
The tracks on a CD can be scanned one af-
ter the other for 8 seconds each.
Press the right-hand rotary/push-
button v to activate “Scan” function.
Scan will begin and “Scan” will appear
in red.Use one of these ways to switch off the
function

Press the right-hand rotary/push-
button v again.

Press g or h.
Playback will resume with the desired
track.
1Input line
2Character set (letters, digits, special
characters)
3Character selected appears magnified,
magnified “M” is starting point
4“Delete Names” function
CD track scan
P82.85-9105-31
iThe function will switch off automati-
cally when the starting track is reached.iFor the CD changer*, it is also possible
to scan all of the CDs in the magazine
slots 1-6 for 8 seconds each (always
track 1). Activate the function “CDs
Scan” in the settings menu (
page 58).
Naming a CD
P82.85-9106-31
1
2
3
4

56 AudioCD operationNaming the CDs inserted in the CD chan-
ger* or CD drive
Turn the right-hand rotary/push-button
v to highlight “CD Naming” in the
main CD menu and press to confirm.
The “CD Naming” menu will appear.

Turn the right-hand rotary/push-button
v to highlight the desired character
and press to confirm.
The character is entered in 1.

Repeat the last step to enter additional
characters.Deleting the character that has been ente-
red last

Press r briefly.
The input marker moves to the left as it
deletes.
Deleting a complete name

Press r longer than 2 seconds.
Altering an entered name

Delete one character at a time or the
entire name.

Then enter the new name.

Press the right-hand rotary/push-
button v longer than 2 seconds.
The name of the CD currently playing
will appear in the main CD menu above
the track number.iThe CD will retain this name even if you
later insert it in a different magazine
slot.
P82.85-9107-31

57 Audio
CD operation
Deleting a CD name
Turn the right-hand rotary/push-button
v to highlight “Delete Names” in the
main CD menu and press to confirm.
The list of CD names will appear.

Turn the right-hand rotary/push-button
v to highlight the name you wish to
delete and press to confirm.
The name is deleted, the following ent-
ry will then move up one position.

Press the right-hand rotary/push-
button v longer than 2 seconds to re-
turn to the main CD menu.
Paging backward/forward in the name me-
mory (if the : and ; symbols are shown)

Turn the right-hand rotary/push-button
v to highlight the : or ; symbol and
press to confirm.
iThe CD names are stored in the names
list in alphabetical order. If the name
memory is full, the following message
will appear: “Attention, name memory is
full. New entry only possible after dele-
ting old one”.
Confirm the message by confirming
“OK”. The input menu will appear again.
Use the “Delete Names” function to de-
lete names from the memory.
P82.85-9108-31