UNIT REPAIR (JR405E) 7A4-85
SERVICE STANDARD (Cont’d)
Number of coil 4.8
Outside diameter mm (in) 11.2 (0.441)
Free length mm (in) 22.3 (0.878)
Return spring
Linear diameter mm (in) 1.1 (0.043)
Number of drive / driven plate 5/5
Standard mm (in) 2.0 (0.079)Drive plate facing thickness
Limit mm (in) 1.8 (0.071)
Retaining plate and retaining plate clearance mm (in) 1.0 – 1.4 (0.039 – 0.055)
5.4 (0.213)
5.6 (0.220)
5.8 (0.228)
6.0 (0.236)
6.2 (0.244)
Available 2-4 brake retaining plate thickness mm (in)
6.4 (0.252)
Number of coil 10.2
Outside diameter mm (in) 6.9 (0.272)
Free length mm (in) 22.5 (0.886)
2-4 brake
Return spring
Linear diameter mm (in) 1.1 (0.043)
Output shaft Seal ring clearance mm (in) 0.10 – 0.25 (0.0039 – 0.0098)
Total end play mm (in) 0.25 – 0.55 (0.0098 – 0.0217)
1.4 (0.055)
1.6 (0.063)
1.8 (0.071)
2.0 (0.079)
2.2 (0.087)
Total end play
Available oil pump bearing race thickness mm (in)
2.4 (0.094)
Torque converter end play mm (in) 67.0 (2.638)
7A4-86 UNIT REPAIR (JR405E)
SPECIAL SERVICE TOOL
ILLUSTRATION PART NO. PART NAME
5-8841-0841-0
Holding Fixture
5-8840-0003-0
Holding Fixture Base
5-8840-2764-0
2-4 Brake Spring Compressor
5-8840-2767-0
High Clutch Spring Compressor
5-8840-2759-0
Low Clutch Spring Compressor
5-8840-2761-0
Oil Pump Oil Seal Installer
5-8840-2769-0
Rear Extension Oil Seal Installer
5-8840-2770-0
Rear Adapter Oil Seal Installer
5-8840-2758-0
Manual Shaft Oil Seal Installer
