2004 ISUZU TF SERIES torque

10-26 CAB

Important Operations
3. Outside Handle


Tighten the outside handle fixing bolts to the specified
torque.
Torque N
m (kgf
m/lb
in)
9 (0.9/78)



17. Window Regulator Handle


Install the regulator handle as illustrated when closing
the window glass.

CAB 10-33
Important Operations
15. Instrument Panel & Crass Beam Assembly
1) Tighten the 4 bolts fixing the cross beam and body panel
to the specified torque.
Torque N
m (kgf
m/lb
ft)
19 (1.9/14)

2) A Bolt: Steering Column to Cross Beam
Torque N
m (kgf
m/lb
ft)
20 (2.0/14)
B Bolt: Pedal Bracket to Cross Beam
Torque N
m (kgf
m/lb
ft)
15 (1.5/11)


3) C Bolt: Parking Brake Bracket to Cross Beam
Torque Nm (kgfm/lbft)
15 (1.5/11)

21. Steering Wheel/Steering Cowl

Tighten the steering wheel fixing nut to the specified
truque.
Torque N
m (kgf
m/lb
ft)
35 (3.6/26)

10-44 CAB
INTERIOR TRIM PANELS
REMOVAL AND INSTALLATION

RTW3A0MF001301

EXTEND CAB Model
Removal Steps
1. Sill plate
2. Dash side trim cover

3. Front pillar trim cover

4. Rear upper cushion
5. Jack cover

6. Rear end trim cover

7. Rear speaker grille/Rear speaker

8. Body side rear lower trim cover
9. Door finisher

10. Tongue side seat belt

11. Body side rear upper trim cover


Installation Steps
11. Body side rear upper trim cover

10. Torque side seat belt
9. Door finisher
8. Body side rear lower trim cover
7. Rear speaker grille/Rear speaker

6. Rear end trim cover
5. Jack cover
4. Rear upper cushion
3. Front pillar trim assembly
2. Dash side trim cover
1. Sill plate

CAB 10-47
Important Operations - Installation
10. Tongue Side Seat Belt


Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)




6. Rear End Trim Cover


Insert the hooks on the back upper portion of trim cove
r
to the body panel.

10-50 CAB



8. Body Side Rear Upper Trim Cover

Pry the trim cover clips free from the body panel.

Important Operations - Installation
7. Tongue Side Seat Belt


Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)




6. Rear End Trim Cover


Insert the hooks on the back upper portion of trim cove
r
to the body panel.

CAB 10-53
1) Pull out the adjuster knob.
RTW3A0SH000301

2) Open the through ring anchor cover and remove the
seat belt upper anchor bolt.


11. Center Pillar Upper Trim Cover


Pry the trim cover clips free from the body panel.


13. Body Side Rear Upper Trim Cover


Pry the trim cover clips free from the body panel.

Important Operations - Installation
12. Rear Tongue Side Seat Belt


Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)

10-54 CAB

10. Front Tongue Side Seat Belt

Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)



7. Rear End Trim Cover


Insert the hooks on the back upper portion of trim cove
r
to the body panel.

10-72 CAB


Important Operations - Removal
1. Front Cover


While pushing the cover downward, pull it.
4. Seat Assembly


Disconnect the seat belt warning harness connecto
r
(Driver’s side only).



5. Side Seat Belt Buckle/Pretensioner Seat Belt/Center
Seat Belt


Remove the seat belt fixing screw and the warning
harness connector clip (Bucket seat model).




RTW4A0SH000101-X



Remove the pretensioner seat belt fixing screw and the
warning harness connector (With pretensioner seat bel
t
model).
24.jpg



Remove the seat belt fixing screws and the warning
harness connector clip (Bench seat model).


Important Operations – Installation
5. Buckle Side Seat Belt/Pretensioner Seat Belt/Center
Seat Belt


Tighten the seat belt fixing screws to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)