2004 ISUZU TF SERIES sensor

ANTI-LOCK BRAKE SYSTEM 5B-15

411R300006
Legend


1.
Hub and Disc

2.
Sensor Rotor


3.
Press

3.
Measure the gap “A” at 4 points at intervals of 90
(degrees).

Confirm that the gap “A” should be within the
specified range.
Range
Type A
4


2 7.0 
7.4 mm (0.276 
0.291 in)
4


4,
4


2 High Ride 7.2
 7.6 mm (0.283
 0.299 in)


411R300016
4. Install the hub and disc assembly. (Refer to the
section Front wheel Drive).

5B -16 ANTI-LOCK BRAKE SYSTEM

Rear Speed Sensor Rotor
Rear Sensor Rotor and Associated Parts
420R300007
Legend


1.
Axle Shaft Assembly with Brake

2.
Sensor Rotor


3.
Front

Removal
1. Remove the axle shaft assembly with brake (1).
(Refer to the section Rear Axle)

ANTI-LOCK BRAKE SYSTEM 5B-17

A03R300003
Legend


1.
Bench Press Fitting

2.
Steel Plate (25-30 mm thickness)


3.
Axle Shaft

4.
Sensor Rotor

Inspection and Repair
Make all necessary adjustments, repairs or part
replacement.


Check damage or powdered iron sticking to the
sensor rotor.


Check play in the sensor rotor.


Check a broken tooth or indentation in the senso
r
rotor.
NOTE: If replacement is required remove the sensor
rotor from the axle shaft assembly with brake. (Refer to
the section Rear Axle).


Discard the used sensor rotor.

(Snapring, Oil seal and Bearing)

Installation
1. Install the sensor rotor and assemble it into the axle
shaft assembly with back plate. (Refer to the section
Rear Axle)

5B -18 ANTI-LOCK BRAKE SYSTEM

420R300005
Legend


1.
Axle Shaft

2.
Oil Seal

3.
Bolt


4.
Back Plate

5.
Sensor Rotor

6.
Double Taper Roller Bearing

2. Install the axle shaft assembly with brake in the rea
r
axle. (Refer to the section Rear Axle).

ANTI-LOCK BRAKE SYSTEM 5B-19

G-Sensor
G-Sensor and Associated Parts


RTW45BLF000101
Legend


1.
G-Sensor


2.
Nut

Removal
1. Remove the front floor console. (Refer to the section
Floor Console)
2. Disconnect the connector.
3. Remove the nuts.
4. Take out the G-sensor.


Installation
1. Set the G-sensor.
2. Install the nut and tighten it to specified torque.

Torque : 8.0 N·m (0.8 kg·m /69 lb in)
3. Connect the connector.
4.
Install the front floor console. (Refer to the
section Floor Console)

5B -20 ANTI-LOCK BRAKE SYSTEM

Special Tools

ILLUSTRATION PART NO.
PART NAME
ILLUSTRATION
PART NO.
PART NAME

5–8840–2789–0
Installer ; Sensor rotor,
front hub 9-8522-1271-0

Setting Tool
5-8840-0007-0

Grip

ELECTRICAL-BODY AND CHASSIS 8A-31
FUSE AND SLOW BLOW FUSE LOCATION (RELAY AND FUSE BOX)
RELAY & FUSE BOX
RHD

FUSE 
ENGINE MODEL
FUSE NO. C24SE 6VE1 4JA1-TC / 4JH1-TC4JA1-L
EB-1 15A ECM 20A ECM 10A ECM 
EB-2 
10A ECM (B) 10A RR FOG 
EB-3 15A FRT FOG
10A TCM 15A FRT FOG 
EB-4 10A ACG (S) 15A FRT FOG  10A ACG (S)
EB-5 10A ILLUMI  10A ILLUMI & TAIL-RH10A ILLUMI
EB-6 10A TAIL  10A TAIL-LH 10A TAIL
EB-7 10A H/LIGHT-RH  10A H/LIGHT RH-LOW10A H/LIGHT RH
EB-8 10A H/LIGHT-LH  10A H/LIGHT LH-LOW10A H/LIGHT LH
EB-9 20A FUEL PUMP 10A O2 SENSOR 10A TRA ILER 
EB-10 10A O2 SENSOR 20A FUEL PUMP 10A AC G (S) 
EB-11 
10A H/LIGHT RH-HIGH 
EB-12 
10A H/LIGHT LH-HIGH
EB-13 10A A/C 
 
EB-14 10A 4WD
10A 4WD  
EB-15 10A HORN   
EB-16 15A HAZARD 10A HAZARD  

SLOW BLOW FUSE
ENGINE MODEL
FUSE NO. C24SE 6VE1 4JA1-TC / 4JH1-TC4JA1-L
SBF-1 100A MAIN 
80A MAIN 
SBF-2  
20A COND, FAN 
SBF-3  
60A GLOW 20A COND, FAN
SBF-4 20A COND, FAN 
30A ECM 50A GLOW
SBF-5 40A IG 1   
SBF-6 
40A ABS-1  
SBF-7 
30A ABS-2  
SBF-8 30A BLOWER   
SBF-9 50A IG 2

8A-32 ELECTRICAL-BODY AND CHASSIS
FUSE AND SLOW BLOW FUSE LOCATION (RELAY AND FUSE BOX)
RELAY & FUSE BOX
LHD

FUSE  Saudi Arabia
ENGINE MODEL
FUSE NO. C24SE 6VE1 4JA1-TC / 4JH1-TC4JA1-L
EB-1 15A ECM 20A ECM 10A ECM 
EB-2 
10A ECM (B) 10A RR FOG 
EB-3 15A FRT FOG
10A TCM 15A FRT FOG 
EB-4 10A ACG (S) 15A FRT FOG  10A ACG (S)
EB-5 10A ILLUMI & TAIL-RH  10A ILLUMI & TAIL-RH 
EB-6 10A TAIL-LH  10A TAIL-LH

EB-7 10A H/LIGHT-RH 10A H/LIGHT-RH
10A H/LIGHT-RH-LOW
 10A H/LIGHT RH-LOW
10A H/LIGHT-RH-LOW
EB-8 10A H/LIGHT-LH 10A H/LIGHT-LH
10A H/LIGHT-LH-LOW
 10A H/LIGHT LH-LOW
10A H/LIGHT-LH-LOW
EB-9 20A FUEL PUMP 10A O2 SENSOR 10A TRA ILER 
EB-10 10A O2 SENSOR 20A FUEL PUMP 10A AC G (S) 
EB-11
10A H/LIGHT-RH-HIGH
10A H/LIGHT RH-HIGH 
EB-12 10A H/LIGHT-LH-HIGH
10A H/LIGHT LH-HIGH 
EB-13 10A A/C 
 
EB-14 10A 4WD
10A 4WD  
EB-15 10A HORN   
EB-16 15A HAZARD 10A HAZARD  
SLOW BLOW FUSE
ENGINE MODEL
FUSE NO. C24SE 6VE1 4JA1-TC / 4JH1-TC4JA1-L
SBF-1 100A MAIN 
80A MAIN 
SBF-2  
20A COND, FAN 
SBF-3  
60A GLOW 20A COND, FAN
SBF-4 20A COND, FAN 
30A ECM 50A GLOW
SBF-5 40A IG 1   
SBF-6 
40A ABS-1  
SBF-7 
30A ABS-2  
SBF-8 30A BLOWER   
SBF-9 50A IG 2