2004 DACIA SUPERNOVA lock

SIDE OPENINGS ELEMENTS M ECHAN ISMS
51
51 - 2
DISMOUNTING
For the front door lock dismounting and the outside opening mechanism, beforehand dismount:
- the window lifting crank;
- the arm rest;
- the inside opening mechanism (1);
- the door panel inner ornament;
- the door panel upper ornament, the locking button (5) and the guiding case (4);
- the door pa nel.
After these operations dismount:
- the lock a ttachment fork (6) and the l ock (11) from the door;
- the front door lock attachment screws (9) on the door caisson;
- the door opening control rod (2) from the lock.
Remove the lock assembly through the technological opening from the door caisson.
Dismount the attachment screws (8) of the outside opening mechanism (7 ) on the front door
outside panel.
REMOUNTING
Perform in the reverse order the dismounting operations, taking into account the following
mounting instructio ns :
- for the lock control mounting, the lock rod (3) will be placed in the position where the
lock is blocked; - introduce the locking rod thought the caisson hole, in the panel guide, then fix it on the
lock by the attachment element;
- mount the button (5) by self-threading on the rod (3);
for the front door lock mounting, the connecting fork (6) of the outside opening mechanism will
be fixed on the existing ball joint on the lock.
11
FRONT DOOR LOCK AND OUTSIDE OPENING MECHANISMLOCK AND FRONT DOOR LOCK CYLINDER
vnx.su

SIDE OPENINGS ELEMENTS M ECHAN ISMS
51
51 - 3
DISMOUNTING
Fo
r the dismounting of the rear door plate with e lectric control and of the outside ope ning
mechanism, beforehan d dismount:
- the window lifting crank, inner opening mechanism;
- the locking button (8) and the guiding case (7);
- the attachment screw (9) of the locking handle (6);
- the door pa nel.
Disconnect the actuator connector (3).
Dismount the attachment screws (1 ) of the box (2) on the caisson of the door, and then detach
an end of the locking rod (4) from the existing ball joint on the plate, and the other end from the
direction change device (5).
Dismount the direction change device (5) by dismounting the assembly attachment nut on the
caisson of the door.
Dismount the attachment screws of the outside opening mechanism on the external panel of
the door.
REMOUNTING
Perform in reverse order the dismounting operations, taking into account the following rec-
ommendation: - for the direction change device mounting (5), the lock rod will be placed in the position
w here the plate is blocked;
- the locking button (8) will be mount by self-threading on the locking rod ;
tighten the screws (1) at the moment of 0,.4 da Nm.
MECHANISM WITH ELECTRIC CONTROL FOR
REAR D OOR OUTSIDE OPENING
LOCK AND REAR DOOR LOCK CYLINDER
vnx.su

SIDE OPENINGS ELEMENTS M ECHAN ISMS
51
51 - 4
DISMOUNTING
Fo
r the rear door lock di smounting and the out side opening m echanism, beforehand dis-
mount: the ash tray box by detaching from clips, the window regulator crank, the arm rest, the
inner opening mechanism (5), the door panel lower and upper ornament, the locking button (1),
the guiding case (2), the door panel.
Then dismount: - the rear door lock attachment screws (2) on the door caisson, and then detach an end of
the locking control rod (6)from the existing ball-j oint on the lock, and t he other e nd from the
direction change device; - the direction change device (4), by releasing the nut and the attachmen t washer assembly
on the door’s caisson; - the re ar door opening rod (3) on the lock (8 ) ;
- the attachment screws (9) of the outside opening mechanism (10) on the rear door
outside panel.
REMOUNTING
Perform in reverse order the dismounting operations, taking into account the following rec-
ommendations:
- for the direction change device mounting (4), the lock rod will be placed in the position
w here the lock is blocked;
- move the assembly so that free arm will be introduced on the control rod (5), and then
the control rod will be introduced through the caisson hole in the door panel guide;
mount the button (1) by self-threading on the rod.
10
9
1
2
3
4
5
8
7
6
REAR DOOR LOCK AND OUTSIDE
OPENING MECHANISM
LOCK
AND REAR DOOR LOCK CYLINDER
vnx.su

NON SIDE OPENINGS ELEMENTS MECHAN ISMS
52
52 - 1
1. Front hood locking system
2. Screw M8-25
3. Front hood opening control
4. Sleeve stopper
5. Cable attachment
element
6. Spring
7. Screw M6-20
8. Lock assembly
THE COMPOSITION OF THE FRONT HOOD
LOCKING SYSTEM
vnx.su

NON SIDE OPENINGS ELEMENTS MECHAN ISMS
52
52 - 2
DISMOUNTING
Dismount: the front hood opening control cable
(3), the attachment screws (2) and the front
hood locking system (1).
REMOUNTING
Pe rform in the reverse order the dismounting operations by tightening the screws (4) at the
moment of C=16Nm. FRONT HOOD LOCKING SYSTEM
1
vnx.su

NON SIDE OPENINGS ELEMENTS MECHAN ISMS
52
52 - 3
HATCHBACK LOCKING SYSTEM (old model)
DISMOUNTING
Loosen the screw for rod length adjustment (5) of the hatchback opening and detach the rod;
Remove the fork (2) and the gasket (4) releasing the hatchback opening control assembly (3)
Dismount the screws (1) and the special axle (6), releasing the guiding case (7 ) .
REMOUNTING
Perform in the reverse order the dismounting operations, the opening rod length adjustment
being performed with the hatchback opened and the lock blocked, in order that aft er three
consecutive drives, the rod mechanism control shall remain permanently tensioned.
HATCHBACK LOCKING SYSTEM
7
vnx.su

NON SIDE OPENINGS ELEMENTS MECHAN ISMS
52
52 - 4
DISMOUNTING
Dismount the hatchback opening control
assembly (2 ) by removing t he fork (1) and
the gasket (2 ) .
Dismount the special screw (6) and release
the assembled lock (5), while beforehand the
rod (5) w as released .
REMOUNTING
Perform in the reverse order the dismounting operations.
HATCHBACK BALANCING DEVICE
DISMOUNTING
Dismount the ball joint (2 ) of the balanc-
ing device fixing (3) on the hatchback ( 1).
Dismoun t the balancing device attachment
on the hatchback frame (6), by removing the
locker (5) and the washer (4).
Release the balancing device.
REMOUNTING
Perform the dismounting operations in the reverse order.
HATCHBACK LOCKING SYSTEM
HATCHBACK LOCKING SYSTEM (after June 1
st 2001)
1
2
5
6
3
4
vnx.su

NON SIDE OPENINGS ELEMENTS MECHAN ISMS
52
52 - 5
HATCHBACK BALANCING DEVICE
DISMOUNTING
Dismount the ball joint (2 ) of the balanc-
ing device fixing (3) on the hatchback ( 1).
Dismoun t the balancing device attachment
on the hatchback frame (6), by removing the
locker (5) and the washer (4).
Release the balancing device.
REMOUNTING
Perform the dismounting operations in the reverse order.
vnx.su