75
75 - 1
FRONT SEATS SLIDES GU IDES
Front seat
75 010
TIGHTENING
MOMENTS(daNm)
Fr ont seat attachment screws 2,1
DISMOUNTIN G
Dismount the attachment screws (1) of the
front seat on the side and central cross mem-
ber in the front part.
By acting upon the lever (2) in the arrow
direction, bring the seat in front position and
dismount the attachment screws (3) of the front
seat on the side and re ar c ross-beam in the
rear part.
1 2 3
4
5
Release the front chair.
Remove the headrests by simultaneously
pushing of the buttons (4) attached on the head-
rests sleeves.
R EMOU NT I NG
Perform the dismounting operations in the
reverse order.
The front seat attachment screws are to be
tighten to the required moment of 2,1 daNm.
ADJUSTMENTS
The front seats, have two possibilities of ad-
justment:
- front or rear longitudinal movement,
w hich can be performed by lever’s operation
(2); - seat back reclining up to the horizontal
position, by rotating the round button (5).
vnx.su
76
76 - 1
SEAT S / REAR BENCH
Rear bench
75 013
75 012
2
4 1 36
5
TIGHTENING MOMENTS (daNm)
Lower part back rest attachment screws 2 . 1
B ack rest attachment screws on s upp ort 0.15
DISMOUNTING
Dismount the seat (1) , by swinging and by
removing them from the welded supports (4)
on the carriage body.
For the backrest (2) dismounting perform
the following operation s:
- dismount t he ba ck rest attachment
sc rews (5) on its supports; - dismount the backrest attachment
screws (6) to the lower part ( fixing plate) on
rear floor;
- push the buttons attached on the head-
rests sleeve and remove the headrests (3).
REMOU NT I NG
Perform the dismounting operations in the
reverse order. The tightening moment of back rest attach-
ment screws to the lower part is of 2,1 daNm,
and the one of the back rest attachment screws
on its support is of 0,15 daNm.
vnx.su
