57
57 - 2
INSIDE ACCESSORIES
DISMOUNTIN G
Dismount :
-s teering attachment screw ( 1) on the
steering column, by means of a screwdriver pro-
vided with TORX T50 head;
- steering wheel (2) not before bringing the
steering to the middle point (wheels are in a di-
rect line); - half-cases (3) and (4) connected be-
tween them by three screws (5) to the steering
column.
In order to dismount the under steering wheel
control from the upper shaft of the steering
w heel, loosen the screw (6) and extract the
under steering wheel control (7).
5 1
2
4
3
5
Disconnect the connectors of :
- lights, windscreen wiper;
- anti-theft mechanism;
- rotating contact.
AT T E N T I ON !
It is forbidden the handling of the pyro-
technic system near heating sources or open
fire, because there is the risk of undesirable
s tarting of the system.
IMP ORTANT !
Anytime when dismounting the steering
wheel, it is necessary to dismount the airbag
connector (1). The airbag is provided wi th
a connector who is short-circuited aft er dis-
connecting the wiring connector, avoiding
in this way all undesirable starting.
AT T E N T I ON !
It is forbidden the change of the rota-
tion c ontact position after di smounting
the under-steering wheel control assem-
bly, because there is the risk of i ts dam-
aging.
The under steering wheel control it is pro-
vided with a pre -cut self-a dhe sive tape
stacked on the rotating contact and on the
under steering wheel control body that is not
allowing the undesirable rotation of the rotat-
ing contact until its mounting on the attach-
ment cone of the steering column. In case the position of the rotating contact
is changed, then this one, is to be rotated
clockwise 2.5 complete rotations (or until it
gets blocked), then is to be rotated a nti-
clockwise 2.5 complete rotations.
7
6
Dashboard
vnx.su
