88
WIRING
88 - 8
Mount the two attachment
screws (required tightening moment: 0.65 daNm) located under
the steering wheel, attaching the airbag pillow.
IMPORTANT
After remounting, che ck the system operation, by means of the CLIP tester. If
everything is correct, unblock UCE airbag (see “Unblocking UCE airbag”). If it is not
correct, see chapter “Diagnostic. Check if t he airbag i ndicator is l ighted when setting
contact on, it is remaining lighted for 3 seconds, then it is turning off and is remaining
off.
OBSERVAT ION:
UCE airbag may accept up to 4 airbag releasing (some elements are loosing their
n ominal characteristics). It is not necessary the systematic replacement after each airbag
r eleasing.
REMARK :
The driver airbag – new item number- is provided with a self-adhesive protective foil
stacked over the airbag connector. Unstacking of t he protection foi l is to be done
ONLY in the moment of m ounting.
Driver’s airbag
vnx.su
