2004 DACIA SOLENZA seats

57
57 - 11
INSIDE ACCESSORIES
Handb rake case
DISMOUNTIN G
Through the cutting out existent in the cock-
pit carpet in the handbrake lever, dismount the
attachment screw (1) of the handbrake case in
front part, on the tunnel.
Move towards front the seats.
Dismo unt :
- bench seat ( see c hapter 75); - attachmen
t screws of the front safety belts
at lower part; - attachment screws of the locks on the tun-
nel;
Detach from clips the carpet and roll it towards
front part.
Dismount the attachment screw ( 2) of the
handbrake case on the tunnel, in the rear part. Release the handbrake c ase.
REMOU NT I NG
Perform the dismounting operations in the re-
verse order. The safety belts screws are to be tighten to the
required moment of 2,7 daNm.
vnx.su

CARRIAGE BODY INSIDE TRIMS
71
71 - 8
1 – cockpit carpe t
2 – clip
DISMOUNTING
Di
smount :
- front seats ( see chapter 78 );
- rear bench seat (see chapter 78);
- front seat belts lockers ( see chap-
ter 59 )
- centra l console ( see chapter 58);
- distributor of the air ventilation/cli-
mate maintenance RACV (see chapter 61 );
- front safety belts at lower part;
- accelera tion pedal limiter.
D etach from clips the cockpit carpet ( 1).
REMOUNTING
Perform the dismounting opera tions in the
reverse order.
The clips attaching is to be performed with
a maximum forc e of 3 daN.
Cockpit carpet
1
2
vnx.su

75
75 - 1
FRONT SEATS SLIDES GU IDES
Front seat
75 010
TIGHTENING
MOMENTS(daNm)
Fr ont seat attachment screws 2,1
DISMOUNTIN G
Dismount the attachment screws (1) of the
front seat on the side and central cross mem-
ber in the front part.
By acting upon the lever (2) in the arrow
direction, bring the seat in front position and
dismount the attachment screws (3) of the front
seat on the side and re ar c ross-beam in the
rear part.
1 2 3
4
5
Release the front chair.
Remove the headrests by simultaneously
pushing of the buttons (4) attached on the head-
rests sleeves.
R EMOU NT I NG
Perform the dismounting operations in the
reverse order.
The front seat attachment screws are to be
tighten to the required moment of 2,1 daNm.
ADJUSTMENTS
The front seats, have two possibilities of ad-
justment:
- front or rear longitudinal movement,
w hich can be performed by lever’s operation
(2); - seat back reclining up to the horizontal
position, by rotating the round button (5).
vnx.su

75
75 - 2
FRONT SEATS SLIDES GU IDES
DISMOUNTIN G
Dismount the front seat ( see chapter 78 “ Seats”).
In order to dismount the attachment screws (1) of the slides guides (2) and (3) on the front
s eat, it is necessary the backward and forward slides guides moving, by acting upon the lever
(4).
Release the slides guides from the front seat.
4
1 5
3
2
REMOU NT I NG
Perform the dismounting operations in the reverse order.
When remounting, observe the positioning of the four spacers (5).
Front seats slides guides
vnx.su