2003 NISSAN TEANA headrest

SE-100
FRONT SEAT

1. Screw cap 2. Screw 3. Seatback garnish
4. Headrest 5. Headrest holder (locked) 6. Headrest holder (free)
7. Side air bag module 8. Seatback frame 9. Nut
10. Seat cushion frame 11. Bolt 12. Seatback pad
13. Seat heater unit 14. Seatback trim 15. Seat cushion pad
16. Seat cushion trim 17. Anchor bolt 18. Seat belt buckle
19. Seat harness assembly 20. Seat adjusting assembly 21. Seat sliding outer cover
22. Bolt 23. Seat slide & lifter switch knob 24. Seat switch assembly
25. Seat switch escutcheon 26. Seat reclining switch knob 27. Seat cushion outer finisher
28. Bracket 29. Memory control unit 30. Bolt

SE-102
FRONT SEAT

1. Screw cap 2. Screw 3. Seatback garnish
4. Headrest 5. Headrest holder (locked) 6. Headrest holder (free)
7. Side air bag module 8. Seatback frame 9. Massage clip
10. Seatback pad 11. Nut 12. Seat heater unit
13. Air bladder (upper) 14. Air bladder (lower) 15. Seatback trim
16. Seat cushion pad 17. Seat cushion trim 18. Seat belt buckle
19. Anchor bolt 20. Bolt 21. Seat adjusting assembly
22. Seat harness assembly 23. Bush clip 24. Massage unit cover
25. Air pump 26. Air tube connector 27. Nut
28. Air valve 29. Seat sliding outer cover 30. Air massage bracket
31. Bolt 32. Bolt 33. Air tube connector
34. Air tube 35. Bolt 36. Ottoman unit
37. Ottoman assembly 38. Rear link outer cover 39. Front link outer cover
40. Rear link outer cover 41. Front link inner cover 42. Seat slide & lifter switch knob
43. Seat reclining switch knob 44. Seat switch escutcheon 45. Seat switch assembly
46. Seat cushion frame 47. Seat cushion outer finisher

SE-104
FRONT SEAT

2. Pull seatback garnish down to remove it.
3. Remove headrest.
4. Remove headrest holder.
CAUTION:
Before installing headrest holder, check its orientation
(front/rear and right/left).
5. Remove retainer from back of seatback.
6. Remove side air bag module mounting nuts, and then remove
side air bag module (Only with the air bag).
7. Remove seatback trim and pad from seatback frame.
PIIA6308E
PIIA1158E
PIIA6309E
PIIB1938E

FRONT SEAT
SE-105
C
D
E
F
G
H
J
K
L
MA
B
SE

8. Remove seatback frame bolts, and then remove seatback
frame.
9. Remove hog rings (non-reusable parts) to separate the seatback trim and pad.
ASSEMBLY
Assemble in the reverse order of disassembly.
Disassembly and Assembly of Seatback (Massage and Power Ottoman Seat)BIS0014G
DISASSEMBLY
1. Remove screw caps from back of seatback, and then remove
screws.
2. Pull seatback garnish down to remove it.
3. Remove headrest.
4. Remove headrest holder.
CAUTION:
Before installing headrest holder, check its orientation
(front/rear and right/left).
PIIA6311E
PIIA6307E
PIIA6308E
PIIA1158E

SE-112
REAR SEAT

REAR SEATPFP:88300
Headrest Fixed Type Seat ComponentsBIS0014K
PIIB1958E

SE-114
REAR SEAT

Headrest Removed and Installed Type Seat ComponentsBIS0014L
PIIB8711E

SE-118
REAR SEAT

Disassembly and Assembly of Seatback (Headrest Fixed Type and Headrest
Removed and Installed Type)
BIS0014Q
DISASSEMBLY
1. Remove headrest (headrest removed and installed type seat only).
2. Remove headrest holder (headrest removed and installed type
seat only).
CAUTION:
Before installing headrest holder, check its orientation
(front/rear and right/left).
3. Remove clip, and then remove seatback mat (only with the seat heater).
4. Release armrest and remove seat back center bracket bolts,
and then remove seatback center bracket (headrest removed
and installed type seat only).
5. Remove seatback screen screws, and then remove seatback
screen.
6. Remove armrest bolts, and then remove armrest assembly from
seatback assembly.
7. Remove hog rings (non-reusable parts), and then remove seatback mat from seatback assembly. (With-
out seat heater.)
8. Remove hog rings (non-reusable parts) to separate the seatback trim and pad.
9. Remove heater control unit nuts, and then remove heater control unit (only with the seat heater).
ASSEMBLY
Assemble in the reverse order of disassembly.
PIIA1158E
PIIA6238E
PIIA6239E