2003 NISSAN MAXIMA Navigation Manual

An approximate location corresponding to
the entered house number is displayed. If
necessary , correct the location using the
joystick.

The location displayed by the calculation
using the house number may differ from the
actual location. In that case, correct the lo-
cation using the joystick.

Press the PUSH ENTER switch.

Select the
Dest. key .INFO:
For streets with no house numbers stored in
the data, the map of a typical location will be
displayed.
The [DEST . SETTING] screen will appear .
Please refer to “Making the system guide the
route with detailed options” on page 5-17.
INFO:
When the city name is known, the street name
can be defined quickly using theCity key .
SETTING WITHIntersectionKEY
This will allow you to set an intersection as a
destination (waypoints).
1. Press the DEST button.
2. Select the
Intersection key .
A keyboard will be displayed.
INV0285
INV0286INV0287
HOW DO I PROGRAM A DESTINATION?
5-8

3. Enter the first street name where the des-
tination (waypoint) is located using the key-
board, then select the
List key .4. Select the first street name using the same
procedures.
INFO:

For a road where lanes with different traffic
directions are shown separately , the list
shows first street name, second street
name, ...

When entering a street name, enter a minor
street name as the first street and the cal-
culation will be easier and quicker .5. Enter the 2nd (intersecting) street name,
then select the
List key .
INFO:
If there are less than 5 streets which intersect
the first street, they will be displayed automati-
cally .
INV0288INV0289INV0290
HOW DO I PROGRAM A DESTINATION?
5-9

6. Select the name of the second street.
The [DEST . SETTING] screen will appear .
7. T o set the destination, select route priorities
then select
OK . Refer to “Making the
system guide the route with detailed op-
tions” on page 5-17.
INFO:
T o adjust the location of the destination, select
the
Map key to display the map on which the
intersection is indicated.
T ouch the
Setting key .
INFO:
If necessary , adjust the position using the joy-
stick.

Select the
Destination key .The [DEST . SETTING] screen will appear .
T o set the destination, refer to “Making the sys-
tem guide the route with detailed options” on
page 5-17.
INFO:
When the city name is known, the street (in-
tersection) name can be defined quickly using
the
City key .
NOTE:
When the corresponding data does not
INV0291INV0292INV0293
HOW DO I PROGRAM A DESTINATION?
5-10

exist under the following conditions, the
street name list may not be displayed:

A street name is being input after the
Citykey has been selected.

List is being displayed by selection of
the
Listkey .
SETTING WITH
Point of Interest (POI)KEY
The Nissan Navigation System includes a da-
tabase of Point of Interest (POI) locations such
as restaurants, hotels, and gas station. (ref.
page 6-9.)
By using this feature, you can set a Point of
Interest location as a destination. For details on
how to use the POI feature, please refer to sec-
tion 6.
SETTING WITHCityKEY
Sets the destination (waypoint) on the map
screen of the area in and around the input city .
1. Press the DEST button.
2. Select the
City key on the [DEST . SET -
TING] screen.
INV0294
INV0316
HOW DO I PROGRAM A DESTINATION?
5-11

3. Enter the characters of the city name which
you wish to set as destinations (waypoints)
using the keyboard on the [DEST . SETTING
(city)] screen, then select the
List key .
INFO:

When the
List key is selected, the data of
the currently-listed cities will be displayed.

If less than 5 suggested cities remain, they
will be displayed automatically .4. Select the city name of your destination
(waypoint) on the [DEST . SETTING (city)]
screen will appear the [DEST . SETTING]
screen.5. T o set the destination (waypoint), select
route priorities and select
OK . Refer to
“Making the system guide the route with
detailed options” on page 5-17.
INV0317INV0320INV0274
HOW DO I PROGRAM A DESTINATION?
5-12

INFO:
If you select the
Info key in step 4, the ad-
dress and telephone number of the facility will
be displayed. If you select the
Enter key , the [DEST . SETTING] screen will
be displayed.
6. T o set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-17.NOTE:
If you select the
Mapkey in step 6, the
map screen of the area around the
specified destination (waypoint)will be
displayed.
If necessary , operate the joystick to adjust
the location of the destination (waypoint).
T ouch the
Setting key and touch the
Destination key to confirm.
The [DEST . SETTING] screen will be dis-
played.
T o set the destination (waypoint), refer to“Making the system guide the route with
detailed options” on page 5-17.
SETTING WITHMapKEY
This will enable you to zoom into the map for
detail and set the desired location. This works
best when you know the location geographi-
cally , or want to check the geographical sur-
roundings on the map before setting the des-
tinations.
1. Press the DEST button.
2. Select the
Map key .
INV0321INV0322
INV0323
HOW DO I PROGRAM A DESTINATION?
5-13

The map of the entire area will be displayed.
3. Operate the joystick to choose the destina-
tion (waypoint).4. Adjust the location using the joystick, and
touch the
Setting key .
5. Select the
Destination key .
The [DEST . SETTING] screen will appear .6. Please refer to “Making the system guide
the route with detailed options” on page
5-17.
INFO:
When the
OK key is selected in the [DEST .
SETTING] screen, route calculation starts. If
you want to add destinations, select the
Waypoint key .
INV0324
INV0488INV0326
HOW DO I PROGRAM A DESTINATION?
5-14

HA VING THE SYSTEM
GUIDE YOU TO THE DESTI-
NA TIONS
WARNING
T o operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
The following two methods of system setting
are available for route guidance from the cur-
rent location to the destination.

For simple route guidance, destinations can
be selected directly from the map.

Details can be selected from the menu.
MAKING THE SYSTEM GUIDE
THE ROUTE WITH EASY OP-
ERATION
Direct destination setting on the map makes it
possible to find routes to destinations easily .
This section explains the method for setting
route guidance to a destination by one
waypoint setting.
1. Scroll the map using the joystick to select
the destination.
Align the waypoint to the cross point on the
screen, and touch the
Setting key .
INFO:
The destination (waypoint) settings with the
joystick cannot be performed in Birdview
TM
display .2. Select the
Destination key .
The street name of the destination will be dis-
played and will be set as destination 1. The
goal mark will be displayed on the map.
INV0489
HOW DO I PROGRAM A DESTINATION?
5-15