2003 NISSAN MAXIMA Navigation Manual

Sets a destination using the intersection of 2
streets.
Please refer to “Setting with
Intersection
key” on page 5-8.


Point of Interest (POI)key:
Use this category item if you want to go to res-
taurant, hotel, gas station or other facilities.
Please refer to “Setting with
Points of Interest (POI) key” on page 5-11.


Citykey:
Sets the destination (waypoint) on the map
screen of the area around the input city .
Please refer to “Setting with
City key” on
page 5-11.


Mapkey:
Use this category item if you want to choose
the place directly on the map display .Please refer to “Setting with
Map key” on
page 5-13.
Touch keys that appear when the
screen is touched
Sets the function which is convenient for the
route guidance to the destination.
When the screen it touched with the map in-
dicating the current location displayed, the fol-
lowing keys will appear on the screen.
INFO:
When no operations are executed after a few
seconds, the keys will disappear automatically .
Quick Stopkey:
Selects the destination (waypoint) from a list of
5 commonly used POI (Points of Interest).
Please refer to “Quick stop” on page 5-26.
Where am Ikey:
Displays the street where the vehicle is cur-
rently located, the previous intersection, and
the upcoming intersection.
Please refer to “Where am I” on page 5-29.
INV0262
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-8

Route Infokey:
Displays the route to the destination. There are
three types of display methods.
Complete Routekey:
Displays all the routes from the current lo-
cation to the destination.
Please refer to “Displaying the complete
route to the destination” on page 11-8.
T urn Listkey:
Displays a list of the guidance points in all
the routes to the destination on a simple
map.
Please refer to “Displaying turn list” on
page 11-9.
Route Simulationkey:
Performs a simulation drive on the map
screen by moving a vehicle icon on all the
routes from the current location to the des-
tination.Please refer to “Requesting the simulation
drive to the destination” on page 11-10.
Detourkey:
When the route is congested with traffic, a de-
tour can be calculated using various distances.
Please refer to “Detouring from the route tem-
porarily” on page 9-4.
Edit Routekey:
Resets the set destination (waypoint).
Please refer to “Making the system guide the
route with detailed options” on page 5-17.
Keys that appear when the map
is scrolled with the joystick
Y ou can scroll the map display and get infor-
mation about the area near your vehicle and the
destination using the joystick.
INFO:

This function can be used when the originalmap disc is inserted.

Y ou can operate this with the map display
on.

This function cannot be used when the sys-
tem is calculating the route or drawing the
screen.
Store Placekey:
Y ou can store the location with the cross
pointer .
Please refer to “Storing current vehicle posi-
tion” on page 7-3.
Destinationkey:
Y ou can store the position to the destination,
using the cross pointer . The maximum number
of destinations is six, and the last one stored
will be the final destination. (# will appear on
the map to denote the selected locations from
1 to 6.) Please refer to “Making the system
guide the route with detailed options” on page
5-15.
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-9

Previouskey:
This has two functions.

Go back to the previous display (cancel).
If you touch this key during setup, the setup
will be canceled and the display will return to
the previous screen.

Finish setup.
If you touch this key after the setup is com-
pleted, the setup will be renewed as directed,
and the display will return to the map.Decision on destination:
If you touch the map screen after moving the
joystick,
will be displayed at the point you
touch. It is possible to set that point as the des-
tination (waypoint) by touching the
Destination key .
HOW TO CHANGE THE DISC
INFO:
The ignition key must be in the ON or ACC po-
sition to insert or remove CDs.
This device is provided with the map CD-ROM.
NOTE:
The ignition key must be in the ON or
ACC position to insert or remove CDs.
INV0486
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-10

How to eject/insert the disc
1. Press theOPENbutton.
The display will tilt forward.
2. Open the display to the fully locked posi-
tion.
3. T o insert a disc:
It will be drawn in automatically . Y ou do not
have to push it in all the way .
T o eject the disc:
Press the
button.
4. Close the display .
INI0010
INI0011INI0012
INI0013
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-11

CAUTION

Close the display while driving to
prevent injury in an accident or
sudden stop.

Do not put any object on the open
display screen.

Do not allow the system to get wet.
Excessive moisture such as
spilled liquids may cause the sys-
tem to malfunction.
SETTING UP THE START-UP
SCREEN
When you turn the ignition key to ACC, the fol-
lowing warning is displayed on the screen:
Read the warning and select the
ENTER key .
INFO:

If you do not touch the
ENTER key , this
system will not proceed to the next step dis-
play .

If you do not use the navigation system,
press the OFF button for the display .
When the engine is turned off during route
calculation and then turned on, the [CON-
FIRMA TION OF DEST ./WA YPOINT] screen
will be displayed after the [SYSTEM
ST ART -UP] screen. When continuing the
previous route guidance, select the
OK
key . T o edit or delete, select the
Change
key .
CLEARING THE MEMORY
All the stored data (Address Book, Avoid Area,
Previous Dest) can be cleared.
1. Change to the current vehicle location
screen.
2. Select the
Setting key .
INV0487
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-12

3. Select theSystem Setting key on the
[SETTINGS] screen.4. Select theClear Memory key .
5. Select the
Y es key .6. When the
Y es key is selected, the stored
data will be cleared, and the [SYSTEM SET -
TINGS] screen will appear .
ABOUT ROUTE GUIDANCE
NOTE:
The navigation system does not take
driving in “CAR POOL LANES” into con-
sideration for the guidance.
INV0259INV0268
INV0269
INV0270
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-13

NOTES ON ROUTE GUIDANCE

The route selected by the system may not
be the shortest, nor are other circumstances
such as traffic jams considered.

Because of the inevitable difference in road
conditions and circumstances between the
time you use this system and the time the
information was produced from the CD,
there may be discrepancies in roads and
regulations. In such cases, follow the actual
information available.

During route calculation, the map will not
scroll, however the vehicle icon will move
with the actual vehicle’s movement.

During route calculation, buttons such as
MAP , DEST , ZM− and ZM+ and
the joystick will be disabled.

In some cases, after the calculation is com-
plete, it may take some time to get the cal-
culated route on the display .
Waypoints that have been passed will not
be covered by the re-routing calculation.

If you scroll the map while the suggested
route is being drawn, it may take more time
to finish drawing.

If waypoints are set, the system is calculat-
ing multiple routes between waypoints si-
multaneously , and the following may result.
— If one section (or more) of the routes be-
tween the waypoints is not found, none of
the route will be displayed.
— The route may not connect completely at
some waypoints.
— The route may require a U-turn close to
some waypoints.

Route calculation may not be completed in
the following cases.
— If there is no main road within 3.1 miles (5
km) from the vehicle, a message saying so
will appear on the screen. T ry requestingroute calculation when the vehicle is closer
to the main road.
— If there is no main road within 3.1 miles (5
km) from the destination or waypoint, a
message saying so will appear on the
screen. T ry setting the location closer to the
main road.
— If the vehicle is too close to the destination
or if there are no branches of the roads to
the destination. A message saying so will
appear on the screen.
— If it is deemed impossible to reach the des-
tination or waypoints because of traffic
regulations, etc.
— If there is only an extremely complicated
route to reach the destination or waypoints.
— If the destination, current vehicle position
or waypoint is within the
avoid area.
— If the setting of
avoid areascovers the
routes to the destination, route calculation
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-14

may not be possible.

The following may occur when the route is
being displayed.
— Even if you are requesting calculation from
the main road, the origin of the route may
not exactly match the current vehicle posi-
tion.
— Even if you are requesting calculation to the
destination on the main road, the end of the
route may not exactly match the destination.
— Even if you are requesting calculation from
the main road, the system may show a route
from another main road. This may be be-
cause the icon to show the current vehicle
position (vehicle icon) is not set accurately .
In that case, park the car in a safe place and
reset the vehicle icon, or continue driving
to see if the vehicle icon appears on the
main road before requesting route calcula-
tion again.
— There are cases in which the system showsa detoured route to reach the destination or
waypoints, if you set them from memory or
facility information. In order to correct this,
you will have to be careful about the traffic
direction, especially when the lanes with
different travel directions are shown sepa-
rately . Such places are interchanges and
service areas.
— This system makes no distinction between
limited traffic control and total control
(blockage). It may show a detoured route
even if the road is usable.
— Even if the freeway preference is set to OFF ,
the route may be set on them. T o avoid this,
set a waypoint on another road type and re-
quest calculation.
— Even if the preference is set as OFF for a
ferry line, the route may be set on it. T o
avoid this, set a waypoint on a road and re-
quest calculation.
— Ferry lines, except those which accept onlypedestrians, bicycles and motorcycles, are
stored in this system. When using them,
take into consideration the travel time re-
quired and operational condition to decide
whether to use them or not.
ABOUT THE DISPLAY ERROR
The following cases may affect the display ac-
curacy of the vehicle’s position or travel direc-
tion. The accuracy will return to normal if the
driving conditions return to normal.
— When there is a similar road nearby .
— When the vehicle is traveling on a long
stretch of straight road or series of curves
with a large radius.
— When the vehicle is traveling in an area with
a checkerboard road system.
— When the vehicle is making consecutive S
curves.
— When the vehicle is at a large Y -shaped
junction.
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-15