2003 NISSAN MAXIMA Navigation Manual

— When the vehicle is on a loop bridge.
— When the vehicle is on a snow-covered or
unpaved road.
— When the vehicle has made several con-
secutive turns or traveled zigzag.
— When the vehicle is rotated on a parking lot
turntable while the ignition switch is OFF .
— Immediately after the vehicle is driven out
of a parking garage or underground parking
lot.
— When the vehicle has different sizes of tires
or tire chains.
— When the vehicle is moved immediately af-
ter the engine is started.
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-16

5 HOW DO I PROGRAM A DESTINATION?
Various wa ys to set the destina tion (or
wa ypoint) ..................................................... 5-2
Seven ca tegories .................................... 5-2
Setting with
Address Bookkey ......... 5-3
Setting with
Previous Dest.key ........ 5-4
Setting with
Address/Streetkey ......... 5-6
Setting with
Intersectionkey.............. 5-8
Setting with
Point of Interest (POI)key ........................................................ 5-11
Setting with
Citykey......................... 5-11
Setting with
Mapkey ....................... 5-13Having the system guide you to the
destina tions ............................................... 5-15
Making the system guide the route with
easy opera tion ...................................... 5-15
Making the system guide the route with
det ailed options .................................... 5-17
Adjusting and deleting the pre-set destina tion
(wa ypoints)................................................ 5-23
Quick stop.................................................. 5-26
Where am I? .............................................. 5-29

V ARIOUS W A YS TO SET
THE DESTINA TION (OR
W A YPOINT)
WARNING
T o operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
SEVEN CATEGORIES
T o set the destinations and waypoints, you can
choose from the seven categories described
below. Use these options to choose the best
way to find the route to the destinations and
waypoints.

Address Book

Previous Dest.

Address/Street

Intersection
Point of Interest (POI)

City

Map
INFO:

If you set destinations or waypoints, they
will be displayed with icons.

If you want to go to places close to the
stored locations or facilities, use categories
such as facility , nearby facility or memory
for easier setting.

When using either the Point of Interest
(POI) or nearby Points of Interest catego-
ries, the names called up can be set as the
destination if you do not scroll the screen.
If you want to choose a different place on
the screen from the one called up, you will
have to scroll the screen.
INV0271
HOW DO I PROGRAM A DESTINATION?
5-2

SETTING WITHAddress BookKEY
The Address Book will allow you to store lo-
cations in the memory . This is especially useful
for locations that you visit frequently .
Please refer to “Setting up and editing the ad-
dress book” on page 7-2.
1. Press the DEST button.
2. Select the
Address Book key on the
[DEST . SETTING] screen.The [DEST . SETTING (Address book)] screen
will be displayed.
3. Select the item key of your destination
(waypoint) on the [DEST . SETTING (Ad-
dress Book)] screen to display the [DEST .
SETTING] screen.4. T o set the destination (waypoint), select
route priorities and select
OK . Refer to
“Making the system guide the route with
detailed options” on page 5-17.
INFO:
Use the joystick or the
orkey to scroll
the display .INV0272
INV0273
INV0274
HOW DO I PROGRAM A DESTINATION?
5-3

NOTE:
Select the
Mapkey to display the map
screen of the area around the specified
destination (waypoint).
If necessary , operate the joystick to adjust
the location of the destination (waypoint).
T ouch theSet key and touch the
Destination key to confirm. The
[DEST . SETTING] screen will be displayed.
T o set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-17.
SETTING WITHPrevious Dest.
KEY
This system memorizes the last 10 destinations
previously chosen.T o set new destinations or waypoints from the
previous destinations.
1. Press the DEST button.
2. Select the
Previous Dest. key on the
[DEST . SETTING] screen.
A total of 10 destinations and locations previ-
ously set will be displayed.
INV0275INV0276
INV0277
HOW DO I PROGRAM A DESTINATION?
5-4

3. Select the item key of your destination
(waypoint) on the [DEST . SETTING (Previ-
ous Dest.)] screen to display the [DEST .
SETTING] screen.4. T o set the destination (waypoint), select
route priorities and select
OK . Refer to
“Making the system guide the route with
detailed options” on page 5-17.NOTE:
T o slightly after the destination, select
the
Mapkey to display the map screen
of the area around the specified desti-
nation (waypoint).
INV0278INV0274INV0279
HOW DO I PROGRAM A DESTINATION?
5-5

5. If necessary , operate the joystick to adjust
the location of the destination (waypoint).
T ouch the
Setting key and touch the
Destination key to confirm. The
[DEST . SETTING] screen will be displayed.
T o set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-17.
SETTING WITHAddress/Street
KEY
Sets the destination (waypoint) from the street
names and addresses that you enter .There are two search methods; direct search by
the street names, and search by the street
names after a city is defined.
1. Press the DEST button.
2. Select the
Address/Street key .
NOTE:
The location displayed using the house
number is the vicinity of the locations
corresponding to the house numbers
stored in the data. It may differ from the
actual location.3. A keyboard will be displayed on the [DEST .
SETTING (Address/Street)] screen. Enter
the street name you want to set.
INFO:
It is not possible to enter names if they are not
stored in the CD-ROM.
INV0284
INV0280
INV0281
HOW DO I PROGRAM A DESTINATION?
5-6

4. Enter the street name of your destination.
For example, enter
T , thenU.
5. Enter
U , then select theList key .
The list screen of street names which have
TU at the top will appear .
If less than 5 suggested streets remain, they
will be displayed automatically .

The city names and street names will be
displayed.

Use the joystick or the ON-SCREENor
key to scroll the display .

Select the
Previous key on the screen to
display the input screen for street names.
6. Select one street of your destination.7. Enter the house number .
Select the
Enter key to display the [DEST .
SETTING] screen.
8. T o set destination, select route priorities
and select
OK . Refer to “Making the sys-
tem guide the route with detailed options”
on page 5-17.
NOTE:
T o slightly after the destination, select
the
Mapkey to display the map of the
area around the house number .
INV0282INV0283INV0335
HOW DO I PROGRAM A DESTINATION?
5-7