2003 NISSAN MAXIMA display

4. The display shows the direction and dis-
tance from the current vehicle position to
the selected facility .
Select the facility name you want to set as
a destination (waypoint).5. The display shows the [ROUTE PRIORI-
TIES] screen.
Set route priorities, then press the
OK
key . The route calculation to the destination
will be started.
INFO:
If quick stop is set after the destination was set,
the system starts the route calculation to the
location as the waypoint. Five waypoints can be
registered at the same time.Quick Stop Customer Setting
1. For example, set “REST AURANT”.
Change to the current vehicle location screen.
Select the
Setting key .
2. Select the
System Setting key on the
[SETTINGS] screen.
INV0355INV0274INV0259
HOW DO I PROGRAM A DESTINATION?
5-27

3. Select the
Quick Stop Customer Settings key on
the [SYSTEM SETTINGS] screen.4. Select a facility you frequently visit. For ex-
ample, select theREST AURANT key .
When it is set, the screen returns to the pre-
vious screen.
Press the MAP button to return to the
map.5. When the map is displayed, touch the
screen. Then, select theQuick Stop key ,
and press the PUSH ENTER switch. The
display shows the selected facility in the
last low.
INV0356INV0357INV0359
HOW DO I PROGRAM A DESTINATION?
5-28

WHERE AM I?
This key is used to find the name of the street
on which the vehicle is currently located.
1. T ouch the screen.
Several keys appear on the right of the screen.
Select the
Where am I? key .2. The display shows the [WHERE AM I?]
screen which includes the next, current, and
previous streets. Each one shows the
streets which the vehicle is approaching,
currently running on, and those past.
Press the MAP or PREVIOUS button to
return to the map.
INV0360INV0361
HOW DO I PROGRAM A DESTINATION?
5-29

SETTING WITH
Point of Interest (POI)KEY
The keys in Point of Interest (POI) are List, Cat-
egory , Nearby , and City , explained below.
1. First press the DEST button.
2. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
SETTING WITH THEListKEY
TheList key is used when you know the
names of the destinations and waypoints.
1. Input the facility name for your destination.INFO:
When names of facilities or cities are input, if
the system detects that the number of corre-
sponding facilities or cities is five or less, the
display shows the list screen automatically .
2. The display shows the screen to select a fa-
cility or
Info. key .
INV0294
INV0295
INV0296
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-2

3. When a facility name is selected, the display
shows the [DEST . SETTING] screen to set
the destination.
Set priorities, select the
OK key . Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-17.INFO:
When the
Info. key next to the facility name
of your choice is selected in step 2, the display
shows the detailed [Address] and [Phone num-
ber] of the selected facility , and the
Enter and
Map key .
When setting the facility as the destination,
select the
Enter key . The display shows
the [DEST . SETTING] screen to set the des-
tination.
Set priorities and select the
OK key .
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-17.
INV0297INV0298INV0299
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-3

When theMap key is selected in step 4,
the display shows the map. When the PUSH
ENTER switch is pressed, the display shows
the
Dest. key .
SETTING WITH THECategory
KEY
TheCategory key is used when you select a
facility category to set the destination.
1. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
Select the
Category key .2. The display shows the screen to select cat-
egories.
Input a category name.
INV0300INV0301INV0302
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-4

3. The display shows the category list.
Select a category name.
INFO:
When a
REST AURANT key is selected, the
screen to input the cuisine type will be dis-
played.4. The screen returns to the [DEST . SETTING
(POI)] screen.
When the category is set, the display shows
the selected category under theCategory
key .
Input the facility name.
INFO:

If you do not know the facility name you
want to go to, select the
List key so that
the facility names in the category will be
listed in alphabetical order .
It may take some time to show the list, de-
pending on categories.
5. When a facility name is input, the system
retrieves the facility name according to the
selected category and the input letters.
Then, the display shows the screen to select
a facility and
Info. key .
Please refer to “Setting with the
List key”
on the previous section.
INV0303INV0304
INV0305
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-5

SETTING WITH THECityKEY
TheCity key is used to retrieve a facility from
the specified city to set the destination.
1. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
Select the
City key .

The display shows the screen to retrieve cit-
ies.2. Input a city name.
3. The display shows the city list.Select a city of your choice.
4. The screen returns to the [DEST . SETTING
(POI)] screen.
When the city is set, the display shows the
selected city under the
City key .
Input the facility name of your choice.
INFO:

If you do not know the facility name, select
the
Category key to retrieve a facility .
When the facility is set from the
Category
key , the display shows the selected facility
INV0306INV0307
INV0308
INV0309
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-6