2003 LEXUS LS430 instrument cluster

Fig. 16: Removing Instrument Panel Finish Panel Lower Center
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
27.REMOVE PANEL INSTRUMENT CLUSTER FINISH LOWER
a. Remove the 3 screws < N >.
b. Using a moulding remover, disengage the 2 clips and remove the panel instrument cluster finish
lower.
HINt:
Use a screwdriver if a moulding remover is not available.
tape up the screwdriver tip before use.
c. Disconnect the connectors.

Fig. 17: Removing Panel Instrument Cluster Finish Lower
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
28.REMOVE RADIO RECEIVER ASSY W/BRACKET (SEE REPLACEMENT
)
29.REMOVE TEMPERATURE CONTROL SWITCH ASSY
a. Using a moulding remover, disengage the 2 claws and remove the temperature control switch assy.
HINt:
Use a screwdriver if a moulding remover is not available.
tape up the screwdriver tip before use.
b. Disconnect the connector.

Fig. 19: Removing Instrument Cluster Finish Panel Sub-Assy Center (W/ Lexus Navigation
System)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
31.REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (W/ LEXUS
NAVIGATION SYSTEM)
a. Remove the 4 bolts.
HINt:
Be careful not to drop the bolts when removing them from the display.
b. Using a moulding remover, disengage the 4 clips and remove the instrument cluster finish panel
sub-assy center.
HINt:
Remove the multi-display together with instrument cluster finish panel sub-assy center.
Use a screwdriver if a moulding remover is not available.
tape up the screwdriver tip before use.

c. Disconnect the connectors.
32.REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (W/O LEXUS
NAVIGATION SYSTEM)
a. Remove the 2 bolts.
HINt:
Be careful not to drop the bolts when removing them from the display.
b. Using a moulding remover, disengage the 4 clips and remove the instrument cluster finish panel
sub-assy center.
Fig. 20: Removing Instrument Cluster Finish Panel Sub
-Assy Center (W/O Lexus Navigation
System)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINt:
Remove the multi-display together with instrument cluster finish panel sub-assy center.
Use a screwdriver if a moulding remover is not available.

Fig. 25: Removing Console Box
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
43.REMOVE INSTRUMENT CLUSTER FINISH PANEL
a. Remove the 2 clips.
b. Pull the instrument cluster finish panel away from the dash.
c. Disen
gage the 2 clips and remove the instrument cluster finish panel.

Fig. 26: Removing Instrument Cluster Finish Panel
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
44.REMOVE COMBINATION METER ASSY
a. Remove the 4 screws.
b. Disconnect the connector and remove the combination meter assy.

SEE COMPONENTS
Installation is in the reverse order of removal.
1.REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER (SEE
REPLACEMENT
)
2.REMOVE INSTRUMENT CLUSTER FINISH PANEL END (SEE REPLACEMENT
)
3.REMOVE INSTRUMENT CLUSTER FINISH PANEL END (SEE REPLACEMENT
)
4.REMOVE COMBINATION METER ASSY (SEE REPLACEMENT
)
5.REMOVE COMBINATION METER GLASS
a. Using a screwdriver, disengage the 9 claws and remove the combination meter glass.
HINt:
tape up the screwdriver tip before use.